v50 Steam/Premium information for editors
  • v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
  • Use this page to report any issues related to the migration.
This notice may be cached—the current version can be found here.

Difference between revisions of "Installation"

From Dwarf Fortress Wiki
Jump to navigation Jump to search
(→‎64-Bit: Clearer install instructions for 32bit drivers.)
Line 141: Line 141:
 
   pacman -Syyu
 
   pacman -Syyu
  
After that you can continue the install as detailed in the 32-bit section. Required 32-bit dependencies will automatically be installed, however you may have to install more dependencies, depending on what sound support you use, and you graphics card
+
===== Sound and Graphics =====
 +
 
 +
After that you can continue the install as detailed in the 32-bit section. Required 32-bit dependencies will automatically be installed, however you may have to install more dependencies, depending on what sound support you use, and your graphics card
  
 
If you use alsa sound, install lib32-alsa-lib with:
 
If you use alsa sound, install lib32-alsa-lib with:
Line 149: Line 151:
 
   pacman -S lib32-libpulse
 
   pacman -S lib32-libpulse
  
If you have ATI graphics install lib32-catalyst-utils with:
+
You will also need to install a 32-bit graphics driver. Install the driver from multilib that corresponds to your driver/device on [https://wiki.archlinux.org/index.php/Xorg#Driver_installation this chart]. ''For example'', if you have xf86-video-nouveau installed, you would run:
   pacman -S lib32-catalyst-utils
+
   pacman -S lib32-mesa-libgl
If you have problems finding the above driver, please note that the proprietary catalyst driver is no longer available within the main arch repositories. So you have to install the above package from the AUR. Please consider the arch wiki pages for more details.
+
 
 +
If you don't know what driver/device you're currently using run:
 +
  lspci -k
 +
 
 +
Find the line that starts with "VGA compatible controller." Your driver will be listed under "kernel driver in use", like so:
 +
  01:00.0 VGA compatible controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
 +
          Subsystem: ASUSTeK Computer Inc. Device 119d
 +
          Kernel driver in use: nvidia
 +
          Kernel modules: nouveau, nvidia
 +
 
 +
If you are using/wish to use the AMD catalyst drivers, please note that they are no longer available within the main arch repositories. You will have to install them from the AUR. [https://wiki.archlinux.org/index.php/AMD_Catalyst#Installation See here for more information.]
  
If you have Nvidia graphics, install lib32-nvidia-utils with:
+
If you have Nvidia graphics, you may also want to install lib32-nvidia-utils with:
 
   pacman -S lib32-nvidia-utils
 
   pacman -S lib32-nvidia-utils
  

Revision as of 23:16, 10 December 2015

This article is about the current version of DF.
Note that some content may still need to be updated.


Download: Linux · Mac OS X ·Windows · all versions · starter packs


Download

You can always get Dwarf Fortress as Toady One, the developer, released it from the Bay12 site (listed at the top of the page).

You can also download the latest version from the links at the top of this page.

Windows users should generally download one of the "Main" (SDL) versions (listed in the first row), unless the "Legacy" version is required for some reason.

Mac and Linux users should generally download the SDL version for their platform. While it is possible to run the Windows version under WINE, it is often slower and less stable than the native version.

Third-Party Packages

These packages include the game as well as several utilities and graphics sets, configurable with an included launcher.

The Dwarf Fortress community often creates custom graphics sets, tilesets and color schemes. They're like graphical mods that make DF look prettier or just different. A lot of people pack the game folder with the tileset installed and everything already set up, so all you have to do is extract and play. Among the most popular of these are Ironhand's Graphics Set and Phoebus' Graphic Set. Most notable graphics sets are included in the packs above.

Installation

Also see: System requirements

Windows

There is no installer for the game. Simply extract the archive file to a folder somewhere and run the game from within the folder.

Make sure to actually extract the archive; do not just open the archive and run the game from the window that appears. If you do this then it may appear to work, but your save game data will get discarded. This is the cause of many "my saved games keep getting deleted" complaints. The game also needs to be able to write to its own folder, so do not install it in C:\Program Files if you are running Windows Vista or later.

Mac

The Mac version is not a single application bundle, but like the Windows version it consists of a folder containing the application along with data files and there is no installer. The entire folder can be dragged into the Applications folder or placed elsewhere. As with the Windows version, the game must be able to write to its own folder.

To start the game execute the launch script "df". Launching "dwarfort.exe" by itself will not work (since the "df" script sets up environment variables pointing to DF's libraries).

On OS X 10.8 and above, you will need to update the SDL_ttf library to run Dwarf Fortress. Bug:7389.

On OS X 10.11 and above, you will need to update the SDL library like this

  1. Download SDL 1.2.15 and replace the file libs/SDL.framework with the (older) one from the downloaded folder, and
  2. Download SDL_ttf 2.0.11 and replace the file libs/SDL_ttf.framework with the one from the downloaded folder.

Alternatively, instead of replacing SDL, you can change the PRINT_MODE setting in data/init/init.txt to STANDARD (or anything not related to 2D). Bug:2624

Retina display users will also need to change PRINT_MODE to STANDARD (or any non-2D option) in init.txt. Bug:6031

Linux

The Linux version of the game is shipped as a compiled 32-bit x86 (Intel/AMD) application. It will also run on a system with a 64-bit AMD or Intel processor and a 64-bit kernel, provided that you have the (32-bit) shared libraries available that the program needs.

Dwarf Fortress for Linux is meant to be run from a terminal (command-line) interface, and so the instructions here will assume you know how to login and get to a command prompt. At least in the default mode, however, Dwarf Fortress is an X client (graphical desktop) program, so you should be in a terminal inside an X session before starting the game. Dwarf Fortress will create a new X window outside of the terminal window, so don't worry about the size of the terminal.

'wget http://www.bay12games.com/dwarves/df_XX_YY_linux.tar.bz2'

  • Unpacking: Dwarf Fortress is shipped as a (bzip2) compressed tar archive. It will extract into a new directory called df_linux. So, cd to wherever you want the game to be unpacked, and then run tar xjf /path/to/df_XX_YY_linux.tar.bz2 (where df_XX_YY_linux.tar.bz2 is the filename). Then run cd df_linux to change into the new directory, and run ./df to execute the Dwarf Fortress wrapper script.

(note: tar xjvf /df_XX_YY_linux.tar.bz2 may be needed in some cases.)

Modern desktop PCs (of the Intel/AMD persuasion) contain CPUs that can run in either 32-bit or 64-bit modes. When you install Linux, you choose one of these architectures. The programs on your system will then be compiled either for the 32-bit (i386, x86) arch, or the 64-bit (amd64, x86_64) arch. If you've forgotten which one you have, you can check:

$ uname -m
x86_64

The above would indicate a 64-bit system. Here's one from a 32-bit system:

$ uname -m
i686

Dwarf Fortress is compiled for 32-bit systems, so if you're on a 32-bit system, things will be slightly easier. If you are getting errors about missing SDL_image libraries (etc.) then you simply need to install them. Use your distribution's package manager for this -- details will be extremely distribution-specific. You don't need the development versions of the packages with the headers (although that won't hurt) -- you just need the runtime versions, with the actual shared libraries.

If you're on a 64-bit system, then things get a bit trickier. Since DF is a 32-bit application, it needs 32-bit versions of the shared libraries. Some Linux distributions provide these in one or more packages that you can download. For example, in Debian, the ia32-libs package contains most of the common 32-bit libraries, including libSDL. If your distribution does not include these, then you may have to supply them manually.


Debian-based

If you get an error like this:

 ./libs/Dwarf_Fortress: error while loading shared libraries: libSDL_image-1.2.so.0:
cannot open shared object file: No such file or directory

or

 ./df: ./libs/Dwarf_Fortress: not found
it means that your system is missing one or more shared libraries.

On Ubuntu/Debian and its derivatives, installing 32-bit libraries is as easy as appending ":i386" to the name of the library. For libsdl-image and libsdl-ttf, this amounts to:

 $ sudo dpkg --add-architecture i386
 $ sudo apt-get update
 $ sudo apt-get install libsdl-image1.2:i386 libsdl-ttf2.0-0:i386 libgtk2.0-0:i386 libjpeg62-turbo:i386 libglu1-mesa:i386 libopenal1:i386

On Ubuntu 13 and below:

 $ sudo apt-get install ia32-libs libsdl-image1.2 libsdl-sound1.2 libsdl-ttf2.0-0

Fedora

On 64-bit Fedora installations you can install 32-bit libraries by appending ".i686" to the package name:

 $ sudo dnf install SDL.i686 SDL_image.i686 SDL_ttf.i686 gtk2-devel-2.24.28-1.fc22.i686 openal-soft.i686 alsa-lib.i686 alsa-plugins-pulseaudio.i686 mesa-dri-drivers-10.6.9-1.20151008.fc22.i686

Fedora installs all 32-bit libraries to /usr/lib and 64-bit libraries to /usr/lib64 (with /lib and /lib64 being links to these two directories), so if you need to install stuff manually, look in there.

Arch Linux

Although Dwarf Fortress may be installed using the method above (with some modifications), it is available through pacman (Arch Linux's package management system), in the [community], for 32-bit, and the [multilib], for 64-bit, repositories. These packages are updated as Dwarf fortress is updated, and handle required dependencies.

32-bit

All of the following commands must be run as root

First, download and install Dwarf Fortress with pacman

 pacman -S dwarffortress

Any required dependencies will be installed, too.

Next you need to add the user(s) that will be playing the game to the games group

 gpasswd -a [users] games

Any users you added to the games group must now be logged out, if they were logged in

Now Dwarf Fortress should be playable by typing:

 dwarffortress

As any user in the games group. Any edits to game files must be done in the '.dwarffortress' directory in the user's home directory, not /opt/dwarffortress.

64-Bit

Installing Dwarf Fortress on 64-bit installs of Arch Linux is the same as installing it on 32-bit systems, with the exception of the [multilib] repository needing to be enabled prior to install.

These commands also must be run as root.

To enable the [multilib] repository run:

 nano /etc/pacman.conf

And delete the pound symbol(#) in front of these three lines (Make sure the top one says #[multilib] NOT #[multilib-testing]

#[multilib]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist

So that they look like this

[multilib]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist

Save the file by typing

 ctrl x

Then run:

 pacman -Syyu
Sound and Graphics

After that you can continue the install as detailed in the 32-bit section. Required 32-bit dependencies will automatically be installed, however you may have to install more dependencies, depending on what sound support you use, and your graphics card

If you use alsa sound, install lib32-alsa-lib with:

 pacman -S lib32-alsa-lib

If use use pulse sound install lib32-libpulse with:

 pacman -S lib32-libpulse

You will also need to install a 32-bit graphics driver. Install the driver from multilib that corresponds to your driver/device on this chart. For example, if you have xf86-video-nouveau installed, you would run:

 pacman -S lib32-mesa-libgl

If you don't know what driver/device you're currently using run:

 lspci -k

Find the line that starts with "VGA compatible controller." Your driver will be listed under "kernel driver in use", like so:

 01:00.0 VGA compatible controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
         Subsystem: ASUSTeK Computer Inc. Device 119d
         Kernel driver in use: nvidia
         Kernel modules: nouveau, nvidia

If you are using/wish to use the AMD catalyst drivers, please note that they are no longer available within the main arch repositories. You will have to install them from the AUR. See here for more information.

If you have Nvidia graphics, you may also want to install lib32-nvidia-utils with:

 pacman -S lib32-nvidia-utils

CentOS 7

CentOS7 is 64-bit, and not all of the required libraries are in the repositories. However, the process is not all that bad, and the last step for the openal library could probably be extended to all of the required libraries for running Dwarf Fortress on other versions of linux.

Install the 32-bit libsdl. The .i686 implies 32-bit:

 sudo yum install SDL.i686

Fortunately, the PUIAS repos have compiled SDL_image for CentOS7 (PUIAS seems to be it's own version of linux, but all of the related libraries seem to have CentOS7 as the distribution). Get it here. For SDL_ttf, you can use the i686 rpm intended for Fedora 18. Other versions would probably work, but this one is tested on at least one system. Get it here here; the filename is SDL_ttf-2.0.11-2.fc18.i686.rpm. *Note: since this rpm was intended for Fedora, there may be some conflicts related to it - if you feel uneasy, you could probably apply the local library method to this rpm. Install both rpm's:

 sudo rpm -Uvh SDL_image-1.2.12-7.sdl7.i686.rpm
 sudo rpm -Uvh SDL_ttf-2.0.11-2.fc18.i686.rpm

The PUIAS repository also has a CentOS7 32-bit openal library. However, if you have a media player installed such as VLC, the rpm will conflict and fail to install. A solution to this is to make a custom libraries folder in your home path. Download the rpm here, and move it to its own directory for simplicity, such as ~/test. Then, extract the rpm, copy the /usr/ files to your local folder, and finally fix a library linking issue:

 rpm2cpio openal-soft-1.15.1-3.sdl7.i686.rpm | cpio -idmv
 cp -r ./usr/* ~/local
 ln -s ~/local/lib/libopenal.so.1 ~/local/lib/libopenal.so

Finally, create a custom run script which will link the openal libraries to Dwarf Fortress and the launch the game. cd into df_linux, and then open your favorite text editor and save the following script in a file with a name such as 'run':

 #!/bin/bash
 export LD_LIBRARY_PATH=~/local/lib
 ./df

Save the script, and set it to executable:

 sudo chmod 777 run

Then run it!

 ./run

Gentoo

There is a a Dwarf Fortress ebuild in the main Gentoo's portage tree compatible with the new multilib support.

 # emerge -av games-roguelike/dwarf-fortress

Wine

Downloading the windows version and running it with the wine emulator works fine (platinum on 1.7.47 as of .4x.xx, which means the program runs flawlessly without any initial user configuration). This also avoids any issues with 32-bit versus 64-bit mode.

Troubleshooting

If you get errors, it is likely that others will have had the same problem; Try searching the bay12games forum with the error message.

Sound

After installing, DF will run, but will complain that it cannot find the OpenAL library and cannot play sounds, even when OpenAL (i386) has been installed. This is due to a bug/feature in which there is no link from the name of the library that DF is looking for ("libopenal.so") to its implementation ("libopenal.so.1" - technically another link). To fix this, simply provide the necessary links in DF's own libs directory:

 $ cd df_linux/libs
 $ ln -s /usr/lib/i386-linux-gnu/libopenal.so.1 ./libopenal.so
 $ ln -s /usr/lib/i386-linux-gnu/libsndfile.so.1 ./libsndfile.so

Upgrading

Since every new version of Dwarf Fortress unpacks in a directory named df_linux you have to manage upgrades yourself - or use the Linux Updater Script. As on all systems, you should not unpack a new version of DF on top of an old version's directory -- this will cause things to break, usually in subtle and mysterious ways. Instead, you should either delete or rename the old df_linux directory first, before extracting the new version.

Manually installing 32-bit libraries

If you do need to manually install the libraries, then the first step is to figure out where you will be putting them. Check to see where your other 32-bit libraries are already installed; for example, on Debian, some are in /lib32 and others are in /usr/lib32. Since libSDL is in /usr/lib32 on a Debian system, that's where we'll want to put libSDL_image and libSDL_ttf. On other distributions, the path could be different.

The second step is to get the 32-bit libraries. You can typically do this by downloading them directly from your distribution's 32-bit package repository. Again using Debian as our example, we can perform a search at http://packages.debian.org/ for files containing the word libSDL_image for the Intel x86 architecture. This takes us to a results page from which we can proceed to the libsdl-image1.2 package page with a list of download links arranged by architecture. Grab the i386 package from here, and repeat this for the libSDL_ttf package, and whatever other library you are missing. Store these package files somewhere convenient.

The third step is to extract the libraries from the packages and get them in the proper location. You probably won't be able simply to install the packages using your package manager, because they are for the wrong architecture. Instead, you'll probably have to extract them by hand. The steps for doing this are distribution-specific, so when in doubt consult your distribution's help resources. Here are the steps for a .deb package.

  • cd into some temporary working directory such as /tmp
  • Extract the files from the .deb archive, which is in ar(1) format:
 tar x /path/to/libsdl-image1.2*_i386.deb
This creates three files: debian-binary, control.tar.gz and data.tar.gz. We only care about data.tar.gz.
  • Extract data.tar.gz:
 tar xzf data.tar.gz
This creates a subdirectory named usr with various files inside it. We only care about usr/lib/libSDL_image-1.2.so.0.8.2 (or whatever precise version yours has).
  • Move the shared library into place:
 sudo mv usr/lib/libSDL_image-1.2.so.* /usr/lib32/
  • Create a symlink to it:
 cd /usr/lib32
 sudo ln -s libSDL_image-1.2.so.0.* libSDL_image-1.2.so.0
 cd -

Repeat this for libSDL_ttf and whatever other libraries are required.

NOTE: If you get the error that libsndfile.so is not found, you must use the following:

 find */libsndfile.so*

cd to the correct directory, then use ln as shown above.


"Not found: /data/art/mouse.png" and similar errors

Fix 1: Preload zlib

Due to incompatibilities between DF's included zlib and newer versions of zlib, libpng can fail on newer systems. A solution is to add this line to the beginning of /your/path/df_linux/df (or /your/path/df_linux/dfhack if you use DFHack):

export LD_PRELOAD=/usr/lib/libz.so.1

Note that this path can vary - be sure that it is referring to a 32-bit zlib.

Fix 2: Use bmp instead

Another solution (if preloading zlib doesn't work) is to force DF to use the BMP versions of image files. You must first edit the /data/init/init.txt file and change all occurrences of "png" to "bmp". This should solve all the error messages except for one: "Not found: data/art/mouse.png" since there is no setting in the init files to change it. The workaround for this is to edit the Dwarf_Fortress file found in the /your/path/df_linux/libs folder which contains the setting for the mouse cursor. If you don't know how to do that, you can try this:

  • cd to the /df_linux/libs folder
  • open Dwarf_Fortress in vi or any other editor of your choise:
 vi ./Dwarf_Fortress
This opens the file for editing (text mode). If you are not familiar with vi, it would be a good idea to follow these steps exactly and not press any other keys since they all activate specific commands. If you do press a key though, you can press the ESC key a few times to cancel the command.
  • With vi open, write the following string and press Enter:
 /mouse
This will search for all the strings that contain the word "mouse" and place the cursor on the first match. Pressing the n key will cycle through all the matches.
  • Press the n key until the cursor moves to the desired string, which is "data/art/mouse.png". If you accidentally move past the string, you can cycle back through the matched strings using the N key (shift + n).
  • Once you find the right string, you will have to move the cursor over the "p" in "[..]/mouse.png". You do that by pressing the l key which will move the cursor to the right. There is also the h key to move the cursor to the left, in case you move past it.
  • With the cursor in the right position press the following key sequence:
 xxxibmp
This will replace the .png extension with the .bmp one which solves the problem of the missing /data/art/mouse.png error.
  • All there is left to do is to save the modifications to the file and quit vi. For that, press the ESC key once or twice and then press the following key sequence after which you press Enter:
 :wq
This saves the changes and quits 'vi'

Now the game should work properly. Have fun!

FreeBSD

Although there is no official version ported to FreeBSD, Dwarf Fortress can nevertheless be run using either Wine or FreeBSD's compatibility with Linux. However, attempting to run the Linux version out of the blue will result in an error about missing library files. Such files must be downloaded from special linux-compatible packages or ports; using your preferred installation method, install the following:

linux-c6

 sudo pkg install linux-c6-gtk2 linux-c6-sdl linux-c6-sdl_image linux-c6-sdl_ttf linux-c6-libGLU \
 linux-c6-openal-soft linux-c6-libsndfile linux-c6-alsa-plugins-oss

linux-f10

If you don't have the linux-c6 ports available in your system, you can still run Dwarf Fortress (albeit without sound) using the following packages:

 sudo pkg install linux-f10-alsa-lib linux-f10-atk linux-f10-cairo linux-f10-expat linux-f10-fontconfig \
 linux-f10-gtk2 linux-f10-jpeg linux-f10-pango linux-f10-png linux-f10-sdl linux-f10-sdl_image linux-f10-tiff \
 linux-f10-xorg-libs linux-sdl_ttf linux_base-f10 linux_dri linux-f10-libGLU

linux_dri might be optional if you have the NVIDIA driver. Note that due to the lack of a linux-f10-libsndfile port, the sound will not work. Requests are being made to port it, as well as a DF port itself.


After you install the required packages, copy (or symlink) DF's own library files to the linux-compatible directory:

 cd dwarf_fortress_directory
 sudo cp libs/lib* /compat/linux/usr/lib/

Or

 cd dwarf_fortress_directory
 sudo ln -s libs/lib* /compat/linux/usr/lib/

You can then run df normally. Although it will likely display a bunch of warnings and errors about fonts, it should work.

If you want to avoid polluting your linux-compatible directory, you can always just set LD_LIBRARY_PATH when running df:

 LD_LIBRARY_PATH=libs:$LD_LIBRARY_PATH ./df

Documentation

Fortunately the documentation on this wiki is very detailed and extensive. You may want to start out with:

Then move on to: