Advanced marksdwarf training guide

xTATTEREDx  · +FINE+  · *SUPERIOR*  · ≡EXCEPTIONAL≡  · ☼MASTERWORK☼

Marksdwarves are fairly buggy, and often refuse to use archery ranges, or stand in front of them, and fail to fire their crossbows. This guide goes into details explaining known bugs, and getting your Marksdwarves to train properly, as well as going into details regarding various ranged weaponry.

Understanding Ranged Weaponry

In vanilla Dwarf Fortress, the raws define three types of ranged weapons, each with their own skill and ammo.

Ranged Weapons
Ranged Weapon	Ranged Skill	Melee Skill	Ammo
Crossbow	Marksdwarf	Hammerdwarf	Bolts
Bow	Bowman	Swordman	Arrows
Blowgun	Blowgunner	Swordman	Darts

Of these, dwarfs can only craft crossbows and bolts. Bows and blowguns are gained either through trade or recovery from downed enemies. If playing a modded game, replace crossbow in the following with one of the above weapons, and proper ammo type.

Equipping Your Marksdwarfs

The Minimum Outfit

At a minimum, each dwarf requires the following to successfully use the crossbow.

• One crossbow
• One quiver
• One stack of bolts for each marksdwarf to fire

A quiver is equipped on the upper body slot. Due to a bug, sometimes a marksdwarf will fail to pickup a quiver if wearing heavy armor. A workaround for this is given below. Wood and metal bolts are generated in stacks of 25. Bone bolts are generated in stacks of 5.

Crossbows

Crossbows can be made with wood or bone at a bowyer's workshop, or out of metal at a metalsmith/magma forge. Metal crossbows can be forged out of copper, bronze, bismuth bronze, iron, steel, or adamantine. Quivers must be made of leather at a leatherworks. The base material of a crossbow appears to have no effect on the lethality of ranged bolts. However, when marksdwarves end up in melee, they will use their crossbow as a hammer, thus it is recommended to make dense metal crossbows.

Quivers and Bolts

Quivers can hold 25 bolts, and dwarves will pick up multiple stacks if necessary to fill it. In other words, they will successfully pick up five separate stacks of bone bolts, or 25 separate bolts if you're using a bolt splitting technique in your fortress. Bolts are collected in last-in-first-out order (LIFO); that is, dwarves will always go for the newest bolts in your fortress, even if there is an ammo stockpile three steps away from them. Each squad with marksdwarves must be assigned ammo; as they deplete it, Dwarf Fortress will automatically add additional ammo to the squad if there are some in the fortress, again following the principle of LIFO.

Avoiding 'Equipment Mismatch' Issues

Miners, wood cutters, and hunters have a default uniform. When these labors are enabled, a dwarf will carry the equipment appropriate to that job, making it unavailable for the military, and causing issues if that dwarf is then drafted. In general, its safe to put miners and wood cutters in ranged squads, and hunters in melee squads, as this prevents them from equipped the same type of item twice.

When drafting hunters, clear their labors, and confirm that your hunter has put his quiver and crossbow away. If you don't, he'll generate equipment mismatches. Furthermore, a mismatch may be cause when a marksdwarf grabs a quiver that was once used by a hunter which still has bolts in it. This can be resolved by looking at the dwarf in the k menu, then open his inventory, find the quiver, and forbid the bolts in it. He'll dump them, and properly reload.

If you don't use hunters, you may want to remove their bolt assignments from the ammunition screen.

Setting your Marksdwarf's barrack

Understanding Possible Training Activities

The first rule of marksdwarf training is you do *not* assign them a normal barrack. If they have that, they will prefer to train as hammerdwarves with their crossbows vs. actually shooting bolts. Furthermore, as the game gives precedence to melee training, they will almost never use an archery range even if one is assigned if they have a choice.

When training, a dwarf has four possible options, which they will take in roughly this order:

- Squad Training
- Individual Combat Drill
- Spar
- Archery Training

Squad training and sparring require multiple dwarfs (and yes, marksdwarves *will* spar as long as they're novice hammerdwarves, training their melee skills while doing so). Except for archery training, dwarves require a standard barracks to conduct any of the above activities. Notably, it is possible to actually train marksdwarves via demonstration, both Crossbow and Archery skills are trainable via demonstrations. By combining this with training orders, it is possible to make Archery Training the only valid option, and thus get them to train consistently.

Building Archery Ranges

Thus, the first step is to build a room with a bunch of archery ranges. I recommend putting them against the left most wall so the shooting direction is automatically correct, but this should work regardless of direction. The room must be large enough that the marksdwarf has a one gap space between them and the target; I just make their "barrack" 10x10, and put an ammo stockpile in it. Notably, (and this is a change from previous versions) the dwarves *must* be able to walk up to the the target; placing a channel in front of it will prevent them from training.

Once you build your range, you must define it as a room. Make it so it touches the far wall, and don't worry, range rooms can overlap. You have to do this for each. Make sure the shooting direction is correct! In addition, your marksdwarf squad MUST at minimum have train set on each archery target. One dwarf can use one target at any given time.

Repeat this for each range; you'll have 5-10 targets overlapping each other and assigned to your marksdwarves squad (in these screenshots, they are the "Home Guard")

The Military Management Screen

This is by far the most difficult part. Fear the 'm' menu, for it eats children. The m menu is confusing on the best days, but this guide will walk you through it.

The first and default page is the positions page. Ignore it for now, because you want to make the right uniform for your marksdwarves. Press n to bring up the uniforms screen. Do yourself a favor and just delete the default archer uniform. It's wrong and will not work properly.

Create a new uniform with c and add the following:

- crossbow (do NOT use individual choice, ranged; you *will* end up with dwarves who think an axe is a ranged weapon)
- shield (optional)
- leather armor
- leather headwear
- leather legwear
- leather handwear
- leather footwear

Press m to switch from "Partial matches" to "Exact matches" in the upper right. This appears to fix most of the issues of them not picking up quivers. You might be able to get away with over clothing however.

Here's what it should like if you did it right:

Now press p to go back to the positions menu. When you create the squad, it will ask for a uniform. Normally, this works as you'd expect it, assigning the uniform to an entire squad. However, if done with the captain of the guard position, it will *only* assign to that spot. You can look at the top of the screen to see what your dwarfs will train as (i.e. 10/10 Marksdwarfs). If needed, after selecting your recruits, then switch to the e menu. Select your squad, and then a position, then press U (that's capital U) to bring up the uniform selection screen.

Highlight your crossbow uniform, and press shift + enter to assign it to all positions in the squad. If you then check the positions screen, at the top, it will say 10/10 marksdwarves, instead of 1/1 markdwarf 9/9 wrestlers, which is what will happen if you leave it on defaults.

Handling Ammo

We're almost done. Go to the ammo screen.

If you're setting this by hand, here's what to know. Each squad needs the correct ammo. Bolts are assigned on a "per-item" basis, i.e., a given stack of bolts thats marked for training will only be used for training and via versus. Unfortunately, an old bug prevents this from working; if you have multiple ammo types, and some are set Training-only, and others are set combat-only, your marksdwarves *will* get stuck and fail to train, or fail to fire. The only way to get this to work is if all ammo assignments in the fortress are set to both "CT" in the UI.

Switching Bolts Types Reliably

Forbidding/Dumping is respected by the game when assigning ammo, so you can use the stocks screen to dump wooden/bone bolts when you're not training, and then have them load metal bolts for fighting. The easiest way to just use wooden/bone bolts when you're training (setting both CT flags on it in the ammo screen), and when you need them to switch, delete the ammo assignment for the training bolts, dump them from the stocks screen (DFHack's enhanced inventory is useful from this), and add the new metal bolts to the screen. Reverse the process to get them to change back.

Squad Training Orders

Now, for the magic bit that gets them doing nothing *but* training. Open the schedule screen with s and look at the orders. The default is "Train, 10 minimium". This is WRONG!

Press x to delete the order. The schedule screen will change to show no scheduled orders.

Press o to pull up the give order screen. Press o until 'Train' is set, and then press + so it shows minimum 1, like this. Then press shift-done to give the order. The screen will look like this:

Now do it again, until you have as many orders as total members of your squad (using a macro will allow you to repeat the process easily). You can give more than 5 orders, you just have to scroll in the orders screen to see it. When you're done it should look like this, after doing it 10 times.

Copy and paste the order to all the months. You can also set Sleep in Barrack at need to increase their training time, though this will raise the stress levels of dwarves in the squad due to tired thoughts.

You're almost done. Activate your squad, and after they finish picking up equipment, watch your bolt supplies vanish as your marksdwarves do nothing *but* archery training.

Why This Works

Squad training and sparing require multiple dwarves (and yes, marksdwarves *will* spar as long as they're novice hammerdwarves). Training, minimum of 1 forces them to work solo. Since they don't have a normal barrack, they can't drill, which leaves Archery Training as the only possible way to train. Since reloading on marksdwarves continues to be erratic, they'll frequently report "No Orders" or similiar once they've finished archery training until the game notices that a given dwarf is out of ammo, in which case they'll go pick up more.

Archery training grants less experience than live fire (8XP per bolt vs. 30XP), but no micromanagement, no hauling, one setup, and you can ignore it until you get that glorious announcement that Urist McMarksdwarf has become an Elite Marksdwarf.

Stopping Melee Charges

The short version: DON'T USE the station scheduling order!

When a dwarf has line of sight on an enemy, they'll do one of two things: run away; or run up and fight. While they're running up to the enemy, dwarves will fire bolts if they have any, but then engage the enemy using their crossbows as hammers instead of firing. The easiest way to prevent this is either use fortification pillboxes (also known as archery towers), with a patrol order that causes them to break line of sight, or defend burrows orders, which will keep them in the area defined by the burrow and prevent them from running up to the enemy.

For patrol routes, marksdwarves *will* not take a Pickup Equipment order as long as they have line of sight on their enemy. Have them go through a door or something, and as soon as they lose sight of the goblin/forgotten beast/demon, they'll immediately go find bolts and reload.

The full effectiveness at Defend Burrow orders at stopping a melee charge is unknown.

V · T · E Military and defense
F.A.Q.
Guides	Military quickstart • Interface walkthrough • Defense guide
Managing soldiers	Soldiers • Scheduling and alerts • Squads • Equipment • Marksdwarf training
Design tips	Military design • Security design • Trap design
Invaders	Ambush • Megabeast • Semi-megabeast • Siege • Thief • Werebeast