- v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
- Use this page to report any issues related to the migration.
v0.31:Activity zone
| This article is about an older version of DF. |
Activity zones are areas in which Template:L are instructed to perform specific tasks, such as Template:L, dumping objects, or collecting Template:L. While activity zones are optional for the performance of certain tasks (fishing, collecting water) and obligatory for certain others (dumping), they can also be used to help keep dwarves out of Template:L.
Activity zones can be placed in any Template:L, including in Template:L or over a Template:L or on top of a Template:L or Template:L. They are placed in one of three ways: rectangular, flow, or floor flow. From within the Zones Template:L, (i)Pressing e in the Zones menu cycles through each method, and pressing Enter begins designation. Rectangular zones are placed in the same manner as stockpiles, specifying two corners of the rectangle. Flow and floor flow are placed similarly to designating rooms from pieces of furniture using +/- to adjust the size (floor flow excludes walls). After that the zone has to be assigned to one of the listed tasks to become functional, by pressing the proper key. In some cases (Template:L, pit/pond) additional orders can then be set from the same menu.
The location of a zone is only visible while in the Zones menu, and any object lying on the ground will hide the presence of a zone tile.
Water Source
- Shortcut w
Dwarves will draw water from this zone, for instance when filling ponds. In order for your dwarves to use this zone correctly, some part of this zone must include the solid ground that is next to the water. For example, make half of your zone cover a brook and the other half cover the bank next to the brook.
Fishing
- Shortcut f
The same above advice for water source zones is applicable to fishing zones. You cannot fish through a Template:L or Template:L [Verify], it must be an open source of water.
Garbage Dump
- Shortcut g
Garbage dump zones are areas in which dwarves will throw items specifically designated by using k then d for single items at a time, or d, b, d to designate a larger area to be dumped (or use the mouse to point and click). Garbage dumps are not the same as Template:L stockpiles, which can be designated to accept any specific type(s) of refuse-type item, such as animal Template:Ls or Template:L, and then are randomly filled by haulers as the items become available on the map.
Garbage dumps:
- Only accept items that have been marked for dumping.
- Require dwarfs to have Template:L Template:L enabled.
- Are subject to refuse orders (o: Set Orders and Options -> r: Refuse Orders). Most notably, dwarves will not dump items that are outside unless you allow them to (o->r->o).
To place a garbage dump, trace a zone on either a relatively empty plot of land or adjacent to a cliff face or hole. If a garbage zone is designated beside a Template:L or hole (both natural or dwarf made) garbage will be thrown off/in the z-space. Each ground tile within that zone is considered a garbage dump tile; thus, if you want to place a single-tile zone, place the zone onto a ground tile (optionally adjacent to a cliff or Template:L), not onto an Template:L. Items dumped into Template:L (provided they are not Template:L) will disappear permanently. Otherwise a single tile (either a dump zone, or the ground below the open space) will hold any number of dumped objects.
Once items are dumped they are automatically marked as "Template:Lden" however they will not dump items that are also forbidden. If you wish to use dumped items, you need to reclaim them. Press k to view the item and f to toggle forbid status. You may also use the reclaim Template:L to reclaim simultaneously all of the items dumped by using d, b, c and tracing the designation over top of the objects.
If a garbage dump is located next to open space, dwarves will always stand on a garbage dump square when throwing into that open space, even if it could potentially be done more efficiently. If a garbage dump is located next to multiple tiles of open space, they seem to prefer the one farthest to the northwest. If a tile to the north and a tile to the west are the only tiles available, they will throw to the west. Since falling objects do not hurt dwarves, such garbage dumps can be a very efficient method of moving materials to the lower levels of your fortress.
Dwarves seem to throw dumped items in the nearest available garbage dump, although this is probably not reliable given that they don't always use the nearest available item to make things at workshops. If a nearer zone becomes available as they are traveling to a zone they will ignore it. Also, they seem to prefer dumps that allow them to throw things in to open space regardless of how far away they are.
Probably due to a bug, dwarves periodically ignore items that are meant to be dumped. Viewing the item by pressing k then toggling forbid and dump status on, then off again f->f->d->d seems to correct this problem.
Pen/Pasture
- shortcut n
A pen or a pasture is used to contain tame animals. Once one is created, animals are assigned to it individually. Dwarves will drag the animals assigned to the pen or pasture to it automatically.
Pit/Pond
- Shortcut p
A Pit/Pond requires a Template:L or hole with adjacent flooring on which a dwarf can stand. Designate the zone from the top of the ramp or hole. By default, the zone will be a pit. To change it to a pond, press P then f. It can be changed back to a pit the same way.
Animals can be assigned to a pit through the P menu. A dwarf will lead the beast to the pit and leave it there. (If the pit is a ramp rather than a hole, the animal will then wander off.)
Dwarves will attempt to fill a pond with Template:L, carried by Template:L from a water-gathering zone. They will stand on the floor adjacent to the top of the ramp or hole, and toss the water onto the ramp or into the hole. Each bucketful increases the depth of the water in the tile below by 1/7. Once the water is dumped from the bucket, the dwarf will either drop the bucket and perform a different task, or choose to fill a pond zone tile again using the bucket (s)he currently holds.
Dwarves will stop scheduling the Fill Pond job when the water depth reaches 6/7.
This is one technique used for Template:L, in order to make Template:L.
Currently, no matter how large the designated pond area,[Verify] only one dwarf at a time will try to fill the pond. In order to fill a large area quickly, it is necessary to designate multiple smaller pond zones (or several zones overlapping the same area).
If you have more than one pond designated as a water source, your dwarves may endlessly try to fill each pond with the other pond's water, making a loop of useless duty.
Sand Collection
- Shortcut s
Sand collection zones are important in the Template:L. They may be placed anywhere, but are only useful when actually placed on Template:L.
Clay Collection
- shortcut c
Clay collection zones are important in the clay industry.
Meeting Area
- Shortcut m
Meeting area zones are zones in which idle dwarves and animals will congregate, similar to meeting halls. Additionally, immigrants will collect at a meeting area until their "migrant" status wears off.
Note that the Template:L you Template:L constitutes a meeting area until you designate the first meeting area of your own. If you start in hostile surroundings it is important to get your dwarves and animals out of danger quickly.
It is a good idea to have at least one meeting area, of one form or another: it allows you to make off-duty dwarves and animals gather in an area where they are not vulnerable, such as within the fortress.
There are several ways to designate a meeting hall. The preferred method is to use an Activity zone; type i, set up a zone, and mark it both "active" and "meeting". Template:L and Template:Ls are intrinsically meeting halls, as are Template:Ls defined from a Template:L. However, you can also create a Meeting Hall.
A meeting area filled with dwarves increases the social skills of idlers. It makes idle dwarves a little less idle, and makes selecting a replacement broker easier. Because almost every dwarf visits a meeting hall at least occasionally, it's an ideal place to site valuable objects and buildings. A meeting hall exposed to sunlight will prevent dwarves from becoming Template:L.
Be warned that having dwarves socialize will often result in them becoming Template:Ls (or forming a Template:L).
Hospital
- Shortcut h
A Hospital zone is an area designated for the Template:L of sick and Template:L dwarves.
Setting up a Hospital
While there are no particular restrictions on the areas that can be set as hospital zones, a hospital requires certain Template:L and supplies to function properly:
| Furniture | Function |
|---|---|
| Template:L | Allow sick dwarves to Template:L |
| Template:L | Used in surgery[Verify] |
| Template:L | Immobilize dwarves who need to stay still to heal |
| Template:L | Storage for medical supplies |
| Medical equipment | Function | Unit quantity* |
|---|---|---|
| Template:L | Required for suturing wounds | 15000 |
| Template:L | Required for bandages | 10000 |
| Template:L | Used to bind broken bones[Verify] | 1 |
| Template:L | Walking aid for dwarves with leg injuries | 1 |
| Template:L | Used to make plaster casts for setting bones[Verify] | 150[Verify] |
| Template:L |
|
1 |
| Template:L | Used to reduce infections when washing patients | 150[Verify] |
*The unit quantity is the quantity of each item that appears in the Hospital Information screen when one object of that type is stored. For example, if one bolt of cloth is stored in the hospital zone, the hospital will report that it contains 10000 cloth.
In addition to furniture and medical supplies, a Template:L is more or less mandatory, as sick dwarves need it for drinking as well as cleaning. The water source need not be in the hospital zone, although the shorter the distance between the two the better.
When the Zones menu (i) is open and the cursor is in a hospital zone, H will bring up the Hospital Information screen. This screen shows the quantity of each type of furniture piece and medical equipment present in the Hospital, and allows you to set the desired quantity of each type of equipment. Note that you must have boxes or bags constructed in the hospital zone for supplies to be stored for medical use; items in a stockpile do not count for the hospital, even if the stockpile is in the hospital zone.
Hospital Beds
When a dwarf becomes sick or Template:Led, he will be carried to a Template:L in a hospital zone by a dwarf with the Recovering Wounded labor set, assuming such a bed is available; otherwise, he may be carried to a bed in a Template:L or Template:L, or to an unassigned bed. If an injured dwarf is resting in a bed outside a hospital zone, he will remain there even if hospital beds become available. Deconstructing the sick dwarf's bed may cause him to be move to a hospital bed, however, and it may be possible for doctors to treat patients who are resting outside of a hospital zone, so long as adequate supplies are available.[Verify]