v50 Steam/Premium information for editors
  • v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
  • Use this page to report any issues related to the migration.
This notice may be cached—the current version can be found here.

Difference between revisions of "40d:Irrigation"

From Dwarf Fortress Wiki
Jump to navigation Jump to search
m (Bot: Adding {{av}})
m (Fixing in-namespace links)
Line 1: Line 1:
 
{{av}}
 
{{av}}
'''Irrigation''' is the process of making rocky ground suitable for [[farming]]. This is done by [[flood]]ing it with [[water]]; when the water evaporates, the tiles are labeled as "muddy".  This is also called '''muddying''' the floor, as the dry floor tile is then a "muddy <type of stone> floor".  Inside [[cave]]s, [[rock]] cavern floor tiles that are covered with water instantly become muddy tiles, which you can then build [[farm plot]]s on.   
+
'''Irrigation''' is the process of making rocky ground suitable for {{l|farming}}. This is done by {{l|flood}}ing it with {{l|water}}; when the water evaporates, the tiles are labeled as "muddy".  This is also called '''muddying''' the floor, as the dry floor tile is then a "muddy <type of stone> floor".  Inside {{l|cave}}s, {{l|rock}} cavern floor tiles that are covered with water instantly become muddy tiles, which you can then build {{l|farm plot}}s on.   
  
Once muddied, ground never needs to be re-irrigated, unless the muddying is removed by dwarven construction (see [[Irrigation#De-Irrigation|below]]).  "Muddied" tiles are not technically wet once any actual water is gone, and damp stone or soil (from nearby water sources) will not cause muddying.
+
Once muddied, ground never needs to be re-irrigated, unless the muddying is removed by dwarven construction (see {{l|Irrigation#De-Irrigation|below}}).  "Muddied" tiles are not technically wet once any actual water is gone, and damp stone or soil (from nearby water sources) will not cause muddying.
  
There are several methods for getting the water onto (and then off of) the floor tiles.  Dwarf Fortress uses reasonably-realistic water dynamics, including measures of [[water depth]]. A depth of 7 is full, depths of 1 will evaporate, leaving the stone wet and thus suitable for farming. Your goal in irrigation is to get a section of ground to be 1/7s, so it will evaporate to muddy. Usually it can't be avoided that part of the section will be flooded with higher levels, but water will disperse and eventually evaporate. If the water level gets too high and no 1/7 tiles exist (or not for long, replaced by shifting 2/7 tiles), the water will not evaporate.  
+
There are several methods for getting the water onto (and then off of) the floor tiles.  Dwarf Fortress uses reasonably-realistic water dynamics, including measures of {{l|water depth}}. A depth of 7 is full, depths of 1 will evaporate, leaving the stone wet and thus suitable for farming. Your goal in irrigation is to get a section of ground to be 1/7s, so it will evaporate to muddy. Usually it can't be avoided that part of the section will be flooded with higher levels, but water will disperse and eventually evaporate. If the water level gets too high and no 1/7 tiles exist (or not for long, replaced by shifting 2/7 tiles), the water will not evaporate.  
  
[[Smooth]]ed floors that are muddied will remain smooth, however if/when [[shrub]]s or [[tower cap]]s grow, that tile will then revert to a rough stone floor tile.  Constructed floors that have been muddied will not prevent the growth of shrubs or tower caps.
+
{{l|Smooth}}ed floors that are muddied will remain smooth, however if/when {{l|shrub}}s or {{l|tower cap}}s grow, that tile will then revert to a rough stone floor tile.  Constructed floors that have been muddied will not prevent the growth of shrubs or tower caps.
  
 
==Indoor/Underground Irrigation ==
 
==Indoor/Underground Irrigation ==
  
 
=== Dryland Farming: farming without irrigation ===
 
=== Dryland Farming: farming without irrigation ===
Some locations have layers of [[soil]]* more than one z-levels thick. It is not necessary to irrigate soil in order to grow crops on soil; it is possible to build a farm plot for the dwarven crops such as [[plump helmet]]s directly on any underground soil tiles. This method obviates the need for irrigation entirely, so is recommended for beginners.
+
Some locations have layers of {{l|soil}}* more than one z-levels thick. It is not necessary to irrigate soil in order to grow crops on soil; it is possible to build a farm plot for the dwarven crops such as {{l|plump helmet}}s directly on any underground soil tiles. This method obviates the need for irrigation entirely, so is recommended for beginners.
  
(* Note: ''Any'' type of [[soil]] is the same for this purpose in Dwarf Fortress, so you can build farm plots on sand, mud, clay, whatever.)
+
(* Note: ''Any'' type of {{l|soil}} is the same for this purpose in Dwarf Fortress, so you can build farm plots on sand, mud, clay, whatever.)
  
Once an underground river is discovered, [[Tower cap]]s and bushes will ''also'' grow on any unimproved (i.e., non-irrigated, non-farm plot) underground soil. Irrigating is recommended for improving tower cap farms.  
+
Once an underground river is discovered, {{l|Tower cap}}s and bushes will ''also'' grow on any unimproved (i.e., non-irrigated, non-farm plot) underground soil. Irrigating is recommended for improving tower cap farms.  
  
 
=== Pump Irrigation ===
 
=== Pump Irrigation ===
[[Stone]] floors can be irrigated conveniently from a water source on the level below, by use of a [[screw pump]].  Simply dig a channel to access the water on z-1, install a pump and set to Start Pump Manually ({{k|q}} + {{k|Enter}}). Any dwarf with the 'Pump Operating' duty active will quickly pump enough water to irrigate a large area (so rapidly that irrigating other rooms becomes a concern!). This can be improved by installing a second pump to draw water out of the room, allowing you to rapidly drain the room in the event of over-filling, or by other creative designs.  
+
{{l|Stone}} floors can be irrigated conveniently from a water source on the level below, by use of a {{l|screw pump}}.  Simply dig a channel to access the water on z-1, install a pump and set to Start Pump Manually ({{k|q}} + {{k|Enter}}). Any dwarf with the 'Pump Operating' duty active will quickly pump enough water to irrigate a large area (so rapidly that irrigating other rooms becomes a concern!). This can be improved by installing a second pump to draw water out of the room, allowing you to rapidly drain the room in the event of over-filling, or by other creative designs.  
  
 
=== Pond Irrigation ===
 
=== Pond Irrigation ===
Dig a channel tile down from a tunnel, preferably near a well or other water source, and dig a farm room below (and preferably around) the channel tile on the lower level. Create a [[zone]] on the channel tile above, and make it a pond. Your dwarves will automatically attempt to fill it with water carried in buckets. As they dump water in, it will muddy the floor on the lower level, spreading out to surrounding tiles once the second bucket load drops. After it has been sufficiently muddied, disable or remove the pond zone. Since dwarves can build farm plots in 1 unit deep water, you can place your plot right away once all desired tiles are covered.
+
Dig a channel tile down from a tunnel, preferably near a well or other water source, and dig a farm room below (and preferably around) the channel tile on the lower level. Create a {{l|zone}} on the channel tile above, and make it a pond. Your dwarves will automatically attempt to fill it with water carried in buckets. As they dump water in, it will muddy the floor on the lower level, spreading out to surrounding tiles once the second bucket load drops. After it has been sufficiently muddied, disable or remove the pond zone. Since dwarves can build farm plots in 1 unit deep water, you can place your plot right away once all desired tiles are covered.
  
 
Due to the low demand in infrastructure, items and water management, this is one of the fastest and the safest way to irrigate a floor. Dwarves carry 1/7 unit of water per trip. It's slower if the water source is far away, but still very manageable compared to digging an aquaeduct and building floodgates or even pumps.
 
Due to the low demand in infrastructure, items and water management, this is one of the fastest and the safest way to irrigate a floor. Dwarves carry 1/7 unit of water per trip. It's slower if the water source is far away, but still very manageable compared to digging an aquaeduct and building floodgates or even pumps.
Line 35: Line 35:
  
 
===Without Irrigation===
 
===Without Irrigation===
As above, a farm plot built on any soil tile marked [[Tile_attributes|Above Ground]] can be used to grow outdoor crops such as [[whip vine]] without irrigation.
+
As above, a farm plot built on any soil tile marked {{l|Tile_attributes|Above Ground}} can be used to grow outdoor crops such as {{l|whip vine}} without irrigation.
  
 
===With Irrigation===
 
===With Irrigation===
Outdoor irrigation of rocky locations is possible using similar techniques; you may have to construct walls to make water channels, pumps to get it out of rivers, and/or stairs up to pour water down on top of a pond zone. This will serve to make muddy tiles suitable for a farm plot; however, be warned -- in mountain [[biome|biomes]] (where you are most likely to feel the need to irrigate outdoors), no outdoor seeds will grow in rocky locations anyway. (The specific message is, "No seeds available for this location"). However, these techniques do work just fine for muddying individual rocky tiles breaking up your farm in a non-mountain [[biome]].
+
Outdoor irrigation of rocky locations is possible using similar techniques; you may have to construct walls to make water channels, pumps to get it out of rivers, and/or stairs up to pour water down on top of a pond zone. This will serve to make muddy tiles suitable for a farm plot; however, be warned -- in mountain {{l|biome|biomes}} (where you are most likely to feel the need to irrigate outdoors), no outdoor seeds will grow in rocky locations anyway. (The specific message is, "No seeds available for this location"). However, these techniques do work just fine for muddying individual rocky tiles breaking up your farm in a non-mountain {{l|biome}}.
  
 
An "outdoor" plot can be built on indoor soil by opening up the ceiling, and optionally flooring it over again. Placing a floor above the plot will not prevent planting from occurring.
 
An "outdoor" plot can be built on indoor soil by opening up the ceiling, and optionally flooring it over again. Placing a floor above the plot will not prevent planting from occurring.
  
 
== De-Irrigation ==
 
== De-Irrigation ==
Muddy stone can be cleaned by building furniture (such as a [[bed]] or [[statue]]) or a paved [[road]] on top of it. Muddy soil can also be cleaned up by building a dirt road on top of it.
+
Muddy stone can be cleaned by building furniture (such as a {{l|bed}} or {{l|statue}}) or a paved {{l|road}} on top of it. Muddy soil can also be cleaned up by building a dirt road on top of it.
  
 
==Design Examples==
 
==Design Examples==
Line 49: Line 49:
 
=== Easy Irrigation ===
 
=== Easy Irrigation ===
  
# {{K|d}}ig from the [[farm plot]] to any source of water, but keep a single tile of [[wall]] between the newbuilt passage and the water.
+
# {{K|d}}ig from the {{l|farm plot}} to any source of water, but keep a single tile of {{l|wall}} between the newbuilt passage and the water.
 
# Dig a passage from the plot towards lower ground or a pit, to serve as a water drain ''(this stage is not 100% necessary, but means you don't have to worry about having too much water and so is recommended)''.
 
# Dig a passage from the plot towards lower ground or a pit, to serve as a water drain ''(this stage is not 100% necessary, but means you don't have to worry about having too much water and so is recommended)''.
# Build a [[floodgate]], and three [[mechanism]]s. (If you're worried about delay, use [[door]]s instead of floodgates.
+
# Build a {{l|floodgate}}, and three {{l|mechanism}}s. (If you're worried about delay, use {{l|door}}s instead of floodgates.
 
# Place the floodgate in the passage. The idea is that it'll block the water from coming through when it's closed.
 
# Place the floodgate in the passage. The idea is that it'll block the water from coming through when it's closed.
# Build a [[lever]] and link it to the floodgate.
+
# Build a {{l|lever}} and link it to the floodgate.
 
# If you are building a drain, follow steps 3-5 again and place the second floodgate at the entrance to the drainage channel, linked to the second lever.
 
# If you are building a drain, follow steps 3-5 again and place the second floodgate at the entrance to the drainage channel, linked to the second lever.
 
# {{K|P}}ull the first lever so the gate opens.
 
# {{K|P}}ull the first lever so the gate opens.
 
# Send a miner to dig that last wall keeping the water from rushing in.
 
# Send a miner to dig that last wall keeping the water from rushing in.
#: Alternatively, have the miner dig a [[channel]] ({{K|d}},{{K|h}}) on that last wall from the Z-level above. This is much safer, since the miner will dig out the wall without actually having to stand in the way of the water.
+
#: Alternatively, have the miner dig a {{l|channel}} ({{K|d}},{{K|h}}) on that last wall from the Z-level above. This is much safer, since the miner will dig out the wall without actually having to stand in the way of the water.
 
# Use the first lever to close the channel once you've got enough water to spread over the area. If you have a drain, you can now let any excess drain off using your second lever.
 
# Use the first lever to close the channel once you've got enough water to spread over the area. If you have a drain, you can now let any excess drain off using your second lever.
 
# The water should now cover (or have covered) 1/7 of each tile.
 
# The water should now cover (or have covered) 1/7 of each tile.
Line 65: Line 65:
 
===Easier, safer irrigation===
 
===Easier, safer irrigation===
  
Here's a relatively safe and simple irrigation plan.  As shown it's set up for an underground [[tower cap]] farm, but can easily be adapted to any level, surface or deep underground.   
+
Here's a relatively safe and simple irrigation plan.  As shown it's set up for an underground {{l|tower cap}} farm, but can easily be adapted to any level, surface or deep underground.   
  
This is a passive system - it's never connected to the river, so it won't do anything unless manned by a dwarf, and it doesn't need any levers or floodgates to work - or to ''stop'' working.  Unless you forget about it, no [[flood]]ing should occur - and even if you do and it does, it's foolproof to stop.
+
This is a passive system - it's never connected to the river, so it won't do anything unless manned by a dwarf, and it doesn't need any levers or floodgates to work - or to ''stop'' working.  Unless you forget about it, no {{l|flood}}ing should occur - and even if you do and it does, it's foolproof to stop.
  
 
Dig a tunnel from ''next to'' your river (don't breach!) to roughly the ''middle'' of your future TC farm, and up to it.  2-3 tiles wide should provide a good, controlled rate of flow from one pump, and ramps or stairs work fine for connecting levels.   
 
Dig a tunnel from ''next to'' your river (don't breach!) to roughly the ''middle'' of your future TC farm, and up to it.  2-3 tiles wide should provide a good, controlled rate of flow from one pump, and ramps or stairs work fine for connecting levels.   
  
Now, the trick is to use a pump on the surface level to provide the water, the pressure, and the control.  Build your pump next to the river - (if it's a [[brook]] you'll have to channel 1 tile of the brook for the inflow - don't breach the tunnel!).  For the outflow, build a retaining wall around the start of your irrigation tunnel.  
+
Now, the trick is to use a pump on the surface level to provide the water, the pressure, and the control.  Build your pump next to the river - (if it's a {{l|brook}} you'll have to channel 1 tile of the brook for the inflow - don't breach the tunnel!).  For the outflow, build a retaining wall around the start of your irrigation tunnel.  
  
 
It will look something like this:
 
It will look something like this:
Line 82: Line 82:
 
         === = underground tunnel for water flow
 
         === = underground tunnel for water flow
  
:''(* This can work from a [[murky pool]], but that is not an infinite source of water.  Plan accordingly.)''
+
:''(* This can work from a {{l|murky pool}}, but that is not an infinite source of water.  Plan accordingly.)''
  
 
Order the pump to "start pump(ing) manually" ({{k|q}} + {{k|Enter}}), a dwarf will respond, the retaining wall will try to fill but will drain down, the tunnel will fill, and the water will start welling up out of the far end.
 
Order the pump to "start pump(ing) manually" ({{k|q}} + {{k|Enter}}), a dwarf will respond, the retaining wall will try to fill but will drain down, the tunnel will fill, and the water will start welling up out of the far end.
Line 88: Line 88:
 
When at least 1/7 depth has covered ''almost'' the entire area ''(yes, you have to keep half an eye on it, so '''you''' are the sole point of failure!)'', go to the pump and tell it to stop pumping - order it deconstructed and then cancel that, and/or {{k|A}}ctivating the dwarf will do fine and be immediate, no lag.
 
When at least 1/7 depth has covered ''almost'' the entire area ''(yes, you have to keep half an eye on it, so '''you''' are the sole point of failure!)'', go to the pump and tell it to stop pumping - order it deconstructed and then cancel that, and/or {{k|A}}ctivating the dwarf will do fine and be immediate, no lag.
  
The water settles out and [[evaporation]] begins immediately.  You can then seal up the tunnel or ignore it as you choose (even if you later, accidentally, breach the river/brook, the u-bend won't cause flooding if the irrigation is on the same level, as shown above.)
+
The water settles out and {{l|evaporation}} begins immediately.  You can then seal up the tunnel or ignore it as you choose (even if you later, accidentally, breach the river/brook, the u-bend won't cause flooding if the irrigation is on the same level, as shown above.)
  
 
If the layout of your underground rooms prevents a one-level tunnel, you can easily drop it down additional levels - it's the difference between the inflow and outflow that matters.  Avoid single-diagonal paths - keeping the tunnel 2-3 wide will always provides pressure and flow.
 
If the layout of your underground rooms prevents a one-level tunnel, you can easily drop it down additional levels - it's the difference between the inflow and outflow that matters.  Avoid single-diagonal paths - keeping the tunnel 2-3 wide will always provides pressure and flow.
  
One drawback is that the lower tunnel will stay full of water, which can be a small problem if you ever, later wish to expand the tunnel for other purposes. One or more drawbridges, acting to block the passage, will allow you to seal it later for easier expansion projects, and, if your first effort, is a good safe opportunity to practice in a non-critical situation. (See also: [[fun]].)
+
One drawback is that the lower tunnel will stay full of water, which can be a small problem if you ever, later wish to expand the tunnel for other purposes. One or more drawbridges, acting to block the passage, will allow you to seal it later for easier expansion projects, and, if your first effort, is a good safe opportunity to practice in a non-critical situation. (See also: {{l|fun}}.)
  
 
=== Reservoir Irrigation ===
 
=== Reservoir Irrigation ===
  
The reservoir method involves building a small reservoir between two [[floodgate|floodgates]] and a farming chamber about 7 times as large as the reservoir. A reservoir of 12 tiles, for instance, can water a 70 tile chamber effectively. Water is let into the reservoir by lowering, then raising one floodgate. The other floodgate then releases the water into the farming chamber. It spreads around, then evaporates after becoming 1 deep.
+
The reservoir method involves building a small reservoir between two {{l|floodgate|floodgates}} and a farming chamber about 7 times as large as the reservoir. A reservoir of 12 tiles, for instance, can water a 70 tile chamber effectively. Water is let into the reservoir by lowering, then raising one floodgate. The other floodgate then releases the water into the farming chamber. It spreads around, then evaporates after becoming 1 deep.
  
The reservoir may be built above the plot to be irrigated with a [[hatch]] or [[bridge]] in the floor, to one side using floodgates, or below and [[pump]]ed upwards. Note that [[Bridge|bridges]], in their default state, will block water from falling between levels. The large surface area you can get this way can make the water spread over your farm area much faster than by using floodgates.
+
The reservoir may be built above the plot to be irrigated with a {{l|hatch}} or {{l|bridge}} in the floor, to one side using floodgates, or below and {{l|pump}}ed upwards. Note that {{l|Bridge|bridges}}, in their default state, will block water from falling between levels. The large surface area you can get this way can make the water spread over your farm area much faster than by using floodgates.
  
It is possible to achieve the same result using a natural pond as the water reservoir. Doing so is easier in the short term but it is not advised if you want to keep replenishing your reservoir for other uses, such as [[well]](s), for natural ponds have a very finite amount of water available. On particular maps, natural ponds can replenish themselves at the beginning of each spring.
+
It is possible to achieve the same result using a natural pond as the water reservoir. Doing so is easier in the short term but it is not advised if you want to keep replenishing your reservoir for other uses, such as {{l|well}}(s), for natural ponds have a very finite amount of water available. On particular maps, natural ponds can replenish themselves at the beginning of each spring.
  
 
===== Worked Example =====
 
===== Worked Example =====
Line 123: Line 123:
 
S = (L + D) / 6
 
S = (L + D) / 6
  
577/6 = 96 1/6; rounding up, this gives 97. This is the number of floor tiles in the smaller room: a 9X10 room with 7 extra tiles. Be aware, however, that if you make your "large" room ''too'' large, some of the water from the "small" room will [[evaporate]] before reaching the other end, and you will not have enough [[water]] to coat the floor. This behavior was observed in a room of 42X35 tiles.
+
577/6 = 96 1/6; rounding up, this gives 97. This is the number of floor tiles in the smaller room: a 9X10 room with 7 extra tiles. Be aware, however, that if you make your "large" room ''too'' large, some of the water from the "small" room will {{l|evaporate}} before reaching the other end, and you will not have enough {{l|water}} to coat the floor. This behavior was observed in a room of 42X35 tiles.
  
Now, get digging. The water supply connects to the smaller filling room by a 1-tile hole where a door or [[floodgate]] will go. The filling room connects to the growing room the same way, and the growing room needs a door too. Remember to have the [[door|doors]] in place before breaching the water source and flooding the water supply line!
+
Now, get digging. The water supply connects to the smaller filling room by a 1-tile hole where a door or {{l|floodgate}} will go. The filling room connects to the growing room the same way, and the growing room needs a door too. Remember to have the {{l|door|doors}} in place before breaching the water source and flooding the water supply line!
  
When you do breach the water source, immediately forbid the first door your miner runs through (see, this is why we use doors), which should be the door closest to the water source. Don't bother forbidding the other two. Link all three doors to three separate [[lever|levers]] and test the system. Close the door between the filling chamber and main farm area and open the door that leads to the water source. When the filling chamber is full, close the door to the water source, close the door leading to the farm, and open the door between the [[farm]] and filling chamber. The water should spread out and coat the entire farm in a thin layer of water. At this time, plant your farms and begin the wait until they yield products.
+
When you do breach the water source, immediately forbid the first door your miner runs through (see, this is why we use doors), which should be the door closest to the water source. Don't bother forbidding the other two. Link all three doors to three separate {{l|lever|levers}} and test the system. Close the door between the filling chamber and main farm area and open the door that leads to the water source. When the filling chamber is full, close the door to the water source, close the door leading to the farm, and open the door between the {{l|farm}} and filling chamber. The water should spread out and coat the entire farm in a thin layer of water. At this time, plant your farms and begin the wait until they yield products.
  
 
=== Underground River Irrigation ===
 
=== Underground River Irrigation ===

Revision as of 20:56, 2 April 2010

This article is about an older version of DF.

Irrigation is the process of making rocky ground suitable for Template:L. This is done by Template:Ling it with Template:L; when the water evaporates, the tiles are labeled as "muddy". This is also called muddying the floor, as the dry floor tile is then a "muddy <type of stone> floor". Inside Template:Ls, Template:L cavern floor tiles that are covered with water instantly become muddy tiles, which you can then build Template:Ls on.

Once muddied, ground never needs to be re-irrigated, unless the muddying is removed by dwarven construction (see Template:L). "Muddied" tiles are not technically wet once any actual water is gone, and damp stone or soil (from nearby water sources) will not cause muddying.

There are several methods for getting the water onto (and then off of) the floor tiles. Dwarf Fortress uses reasonably-realistic water dynamics, including measures of Template:L. A depth of 7 is full, depths of 1 will evaporate, leaving the stone wet and thus suitable for farming. Your goal in irrigation is to get a section of ground to be 1/7s, so it will evaporate to muddy. Usually it can't be avoided that part of the section will be flooded with higher levels, but water will disperse and eventually evaporate. If the water level gets too high and no 1/7 tiles exist (or not for long, replaced by shifting 2/7 tiles), the water will not evaporate.

Template:Led floors that are muddied will remain smooth, however if/when Template:Ls or Template:Ls grow, that tile will then revert to a rough stone floor tile. Constructed floors that have been muddied will not prevent the growth of shrubs or tower caps.

Indoor/Underground Irrigation

Dryland Farming: farming without irrigation

Some locations have layers of Template:L* more than one z-levels thick. It is not necessary to irrigate soil in order to grow crops on soil; it is possible to build a farm plot for the dwarven crops such as Template:Ls directly on any underground soil tiles. This method obviates the need for irrigation entirely, so is recommended for beginners.

(* Note: Any type of Template:L is the same for this purpose in Dwarf Fortress, so you can build farm plots on sand, mud, clay, whatever.)

Once an underground river is discovered, Template:Ls and bushes will also grow on any unimproved (i.e., non-irrigated, non-farm plot) underground soil. Irrigating is recommended for improving tower cap farms.

Pump Irrigation

Template:L floors can be irrigated conveniently from a water source on the level below, by use of a Template:L. Simply dig a channel to access the water on z-1, install a pump and set to Start Pump Manually (q + Enter). Any dwarf with the 'Pump Operating' duty active will quickly pump enough water to irrigate a large area (so rapidly that irrigating other rooms becomes a concern!). This can be improved by installing a second pump to draw water out of the room, allowing you to rapidly drain the room in the event of over-filling, or by other creative designs.

Pond Irrigation

Dig a channel tile down from a tunnel, preferably near a well or other water source, and dig a farm room below (and preferably around) the channel tile on the lower level. Create a Template:L on the channel tile above, and make it a pond. Your dwarves will automatically attempt to fill it with water carried in buckets. As they dump water in, it will muddy the floor on the lower level, spreading out to surrounding tiles once the second bucket load drops. After it has been sufficiently muddied, disable or remove the pond zone. Since dwarves can build farm plots in 1 unit deep water, you can place your plot right away once all desired tiles are covered.

Due to the low demand in infrastructure, items and water management, this is one of the fastest and the safest way to irrigate a floor. Dwarves carry 1/7 unit of water per trip. It's slower if the water source is far away, but still very manageable compared to digging an aquaeduct and building floodgates or even pumps.

If you need to irrigate a larger area, larger than 3x3 - depending on distance to the water source - you may need to dig several channel tiles. The method also works great with constructed staircases for creating outdoor farm plots where there's an occasional stone in the ground.

NOTE: Digging a ramp or channel down from the surface will label the tile below as "Outside". This means that underground plants will not grow there.

Wave Irrigation

Although seawater is unfit for carrying to your farm in a bucket, areas muddied by seawater seem to be farmable. One favored method of achieving this is building a farm room under a beach and making a hole in its roof, closeable with a hatch, to let waves in. Alternately, water is desalinated by pumping, so pumping it to your farming room will work if the water does not pass through an aquifer.

Outdoor Irrigation

Without Irrigation

As above, a farm plot built on any soil tile marked Template:L can be used to grow outdoor crops such as Template:L without irrigation.

With Irrigation

Outdoor irrigation of rocky locations is possible using similar techniques; you may have to construct walls to make water channels, pumps to get it out of rivers, and/or stairs up to pour water down on top of a pond zone. This will serve to make muddy tiles suitable for a farm plot; however, be warned -- in mountain Template:L (where you are most likely to feel the need to irrigate outdoors), no outdoor seeds will grow in rocky locations anyway. (The specific message is, "No seeds available for this location"). However, these techniques do work just fine for muddying individual rocky tiles breaking up your farm in a non-mountain Template:L.

An "outdoor" plot can be built on indoor soil by opening up the ceiling, and optionally flooring it over again. Placing a floor above the plot will not prevent planting from occurring.

De-Irrigation

Muddy stone can be cleaned by building furniture (such as a Template:L or Template:L) or a paved Template:L on top of it. Muddy soil can also be cleaned up by building a dirt road on top of it.

Design Examples

Easy Irrigation

  1. dig from the Template:L to any source of water, but keep a single tile of Template:L between the newbuilt passage and the water.
  2. Dig a passage from the plot towards lower ground or a pit, to serve as a water drain (this stage is not 100% necessary, but means you don't have to worry about having too much water and so is recommended).
  3. Build a Template:L, and three Template:Ls. (If you're worried about delay, use Template:Ls instead of floodgates.
  4. Place the floodgate in the passage. The idea is that it'll block the water from coming through when it's closed.
  5. Build a Template:L and link it to the floodgate.
  6. If you are building a drain, follow steps 3-5 again and place the second floodgate at the entrance to the drainage channel, linked to the second lever.
  7. Pull the first lever so the gate opens.
  8. Send a miner to dig that last wall keeping the water from rushing in.
    Alternatively, have the miner dig a Template:L (d,h) on that last wall from the Z-level above. This is much safer, since the miner will dig out the wall without actually having to stand in the way of the water.
  9. Use the first lever to close the channel once you've got enough water to spread over the area. If you have a drain, you can now let any excess drain off using your second lever.
  10. The water should now cover (or have covered) 1/7 of each tile.
  11. Wait for the water to evaporate and/or drain off (Dwarves can built farm plots in 1/7 water, so you don't need to wait).
  12. Enjoy your newly irrigated land.

Easier, safer irrigation

Here's a relatively safe and simple irrigation plan. As shown it's set up for an underground Template:L farm, but can easily be adapted to any level, surface or deep underground.

This is a passive system - it's never connected to the river, so it won't do anything unless manned by a dwarf, and it doesn't need any levers or floodgates to work - or to stop working. Unless you forget about it, no Template:Ling should occur - and even if you do and it does, it's foolproof to stop.

Dig a tunnel from next to your river (don't breach!) to roughly the middle of your future TC farm, and up to it. 2-3 tiles wide should provide a good, controlled rate of flow from one pump, and ramps or stairs work fine for connecting levels.

Now, the trick is to use a pump on the surface level to provide the water, the pressure, and the control. Build your pump next to the river - (if it's a Template:L you'll have to channel 1 tile of the brook for the inflow - don't breach the tunnel!). For the outflow, build a retaining wall around the start of your irrigation tunnel.

It will look something like this:

surface level      __   xX(   )__________________________________ 
river water level    ~~~   |_|== |            ____TC_   _Farm____ 
water -1                       |_|===================|_|          

~~~ = river/brook*
xX = pump (pumps from left, from west in this diagram) ( ) = small walled retaining area on surface, to contain outflow of pump. |_| = channels, ramps, and/or stairs up to next level === = underground tunnel for water flow
(* This can work from a Template:L, but that is not an infinite source of water. Plan accordingly.)

Order the pump to "start pump(ing) manually" (q + Enter), a dwarf will respond, the retaining wall will try to fill but will drain down, the tunnel will fill, and the water will start welling up out of the far end.

When at least 1/7 depth has covered almost the entire area (yes, you have to keep half an eye on it, so you are the sole point of failure!), go to the pump and tell it to stop pumping - order it deconstructed and then cancel that, and/or Activating the dwarf will do fine and be immediate, no lag.

The water settles out and Template:L begins immediately. You can then seal up the tunnel or ignore it as you choose (even if you later, accidentally, breach the river/brook, the u-bend won't cause flooding if the irrigation is on the same level, as shown above.)

If the layout of your underground rooms prevents a one-level tunnel, you can easily drop it down additional levels - it's the difference between the inflow and outflow that matters. Avoid single-diagonal paths - keeping the tunnel 2-3 wide will always provides pressure and flow.

One drawback is that the lower tunnel will stay full of water, which can be a small problem if you ever, later wish to expand the tunnel for other purposes. One or more drawbridges, acting to block the passage, will allow you to seal it later for easier expansion projects, and, if your first effort, is a good safe opportunity to practice in a non-critical situation. (See also: Template:L.)

Reservoir Irrigation

The reservoir method involves building a small reservoir between two Template:L and a farming chamber about 7 times as large as the reservoir. A reservoir of 12 tiles, for instance, can water a 70 tile chamber effectively. Water is let into the reservoir by lowering, then raising one floodgate. The other floodgate then releases the water into the farming chamber. It spreads around, then evaporates after becoming 1 deep.

The reservoir may be built above the plot to be irrigated with a Template:L or Template:L in the floor, to one side using floodgates, or below and Template:Led upwards. Note that Template:L, in their default state, will block water from falling between levels. The large surface area you can get this way can make the water spread over your farm area much faster than by using floodgates.

It is possible to achieve the same result using a natural pond as the water reservoir. Doing so is easier in the short term but it is not advised if you want to keep replenishing your reservoir for other uses, such as Template:L(s), for natural ponds have a very finite amount of water available. On particular maps, natural ponds can replenish themselves at the beginning of each spring.

Worked Example

To create this irrigation system, you need:

Tree farm.png
  • A large growing room.
  • The large room can be any size. (For this example, we will use a 24 by 24 size room.)
  • An adjacent smaller filling room that will be filled with exactly the right amount of water.
  • To calculate the size of this room, see below.
  • A water supply line such as a tube leading to a water source.
  • Lever-controlled doors or floodgates connecting the large room to the smaller one, and the smaller one to the water supply. Doors are preferred as you don't need levers for your dwarf to pass. (However, if you're paranoid or your dwarves are particularly dumb, you might want to lever them anyways. The creator of this method (GreyMario) recommends using doors because they have no delay when triggered.)

Calculating Room Size

There are 576 (24²) floor tiles in the large room (L). The small room (S) must hold enough water to cover the large room, the small room, and the space occupied by the door(s) (D) in between with 1 unit of water. Each tile of the small room can hold 7 units of water, so:

S = (L + S + D) / 7

-or-

S = (L + D) / 6

577/6 = 96 1/6; rounding up, this gives 97. This is the number of floor tiles in the smaller room: a 9X10 room with 7 extra tiles. Be aware, however, that if you make your "large" room too large, some of the water from the "small" room will Template:L before reaching the other end, and you will not have enough Template:L to coat the floor. This behavior was observed in a room of 42X35 tiles.

Now, get digging. The water supply connects to the smaller filling room by a 1-tile hole where a door or Template:L will go. The filling room connects to the growing room the same way, and the growing room needs a door too. Remember to have the Template:L in place before breaching the water source and flooding the water supply line!

When you do breach the water source, immediately forbid the first door your miner runs through (see, this is why we use doors), which should be the door closest to the water source. Don't bother forbidding the other two. Link all three doors to three separate Template:L and test the system. Close the door between the filling chamber and main farm area and open the door that leads to the water source. When the filling chamber is full, close the door to the water source, close the door leading to the farm, and open the door between the Template:L and filling chamber. The water should spread out and coat the entire farm in a thin layer of water. At this time, plant your farms and begin the wait until they yield products.

Underground River Irrigation

Underground rivers are often what makes living in freezing climates possible, because they don't freeze over. Its very easy to tap one if you know what you're doing. Once you've located it, pick out a good spot for your farm room and dig it out. Make sure you're on the same level as the water; that is, where the actual water is located, not where the 'Open Space' is. Channel out one tile in the farm room and replace it with a floor hatch. Dig a narrow tunnel to the underground river and put a wall grate and a floodgate in it. Link the floodgate and hatch to seperate levers. Dig one level down and dig a drainage shaft from the tile below the hatch to the point where the river 'drops'; you'll see a 5x5 area of 'Open Space'. When you are ready, dig a small tunnel and channel out the floor so you breach the river below and send it into your grate and floodgate. Open the floodgate to water your crops, close it when you're done and open the hatch to drain.

NOTE: The grate is necessary to filter out nasty creatures that might otherwise come in with the water.

An easier method is to find a location where the cave river falls for more than three z levels and simply build a screw pump to suck the falling water from midair.

        <- Empty room which will be used to farm.
##╬%╬## <- Screw pump with doors on each side to keep the water from possibly washing the pumping dwarf into the river.
###%###
##~~~## <-- Water is falling here.
#     #
#     #
#     #
##   ##
#######

Further Testing

The type of rock is changed (at least in v0.28.181.40d) - perhaps to that of the rock wall below? What if there is no rock wall below?

  • it would seem this only affects the non-native stone of a layer, and changes it into the native stone, it definitely does not turn it into the rock type in the layer beneath if it is another non-native stone. (non-native means stone like orthoclase or microcline)