Editing 40d:Exploratory mining

Exploratory mining is the process of mining large areas in order to locate resources such as [[gems]], [[metal]] [[ores]] and other types of [[stone|rock]]. It is also used, to a lesser extent, to find the locations of hidden underground features such as [[chasm]]s, [[underground river]]s, [[magma]] and [[adamantine]].
The most straightforward method is to mark a large rectangular area for digging. Unfortunately, this method is also the least efficient. More efficient digging patterns involve digging out a smaller percentage of the stone in a given area, but still revealing a large percentage of the stone. These patterns are compromises, which depend on factors that will be described in this article.
Note that exploratory mining is the process dedicated solely to discovery of resources and features. The digging process is usually separated, and not discussed here in great detail.
The [[cheating]] counterpart to exploratory mining is the infamous [[utilities#reveal.exe|reveal]] tool.

= Resource Distribution =
To know how you should dig, it helps to know what you are looking for. When a  second material appears in a [[layer]], depending on the type of stone, ore or gem it appears in one of three shapes, large clusters, small clusters, or veins.

(For a more complete discussion of this, see [[Vein|veins and clusters]])
<!--EDITORS - BE SURE TO UPDATE BOTH ARTICLES!
SOME REDUNDANT INFORMATION IS CRITICAL TO THIS ARTICLE (but not all)-->

* '''Large cluster''': An oval that occupies nearly half of a 48x48 block, area-wise. Only one appears per block.  (The stones that comprise large clusters ''tend'' not to have small clusters or useful veins - see specific [[stone]] type for details.)
* '''Vein''': A sinuous line of the material crosses the block.  Multiple veins can occur in the same block.
* '''Small cluster''': A sprinkle of 1 to 9 adjacent tiles. Multiple small clusters of the same or different materials may be in the same block, or be adjacent to each other.

'''Ores''' can appear as any of the three, depending on the specific material.  '''Gems''' appear only as small clusters.

=== Large clusters in a block ===
It's recommended to first dig out a wide grid of single shafts that hit the centers of the major (48x48) [[area block]]s - if your map is 6x6, that's 36 center-shafts (or as many area blocks as you care about to start with).  With a few exceptions*, if a block has a large cluster it will ''not'' have any other veins or small clusters within it - nothing.  So, depending on the stone found, blocks with large clusters can be skipped right away because they are mostly worthless.  (Note that layers above or below are not influenced by each other - this may influence whether you use shafts or tunnels for your exploration.)  Area blocks without a large cluster can be explored using one of the patterns mentioned below. This will save you a lot of additional work (and dug out generic stone).

:''(* Exceptions include [[adamantine]] veins, which can occur in any layer or large cluster in their block; [[olivine]] clusters and [[chromite]] veins, which can contain [[demantoid]]s and [[native platinum]]; and [[magnetite]] with its possible [[platinum]] veins; <small>...and possibly others?</small>)''

===Identifying Layers===
Some players may wish to first identify the layers beneath the surface of their map.  If (as described immediately above) you dig exploratory shafts that hit the centers of the major (48x48) [[area block]]s, you will hit many [[cluster|large clusters]] that give you no helpful information - for instance, many stone found in clusters are found in "any layer". The solution is to dig nearer the corners or edges, to avoid the 20x40 oval that is always close to the center of the block.  However, remember that the game does make the borders between [[area block]]s fuzzy - so the closer you get to that border, the less reliable your information.  

Between this and the previous technique, a complete picture of your underground geology can be achieved, and with that information you can then concentrate where you need to.

=== Finding a specific ore ===
Often a player will have need of a specific type of metal - and that requires that you either [[trade]] for it, or find a vein of an appropriate ore.  Now, it's quite possible that that necessary ore is simply not present on your map - it's rare that a map will contain ''every'' ore.  But ''if'' it's there, it's usually not too hard to find, if you know where to look.

In short, ore comes in veins, which tend to be a few tile wide and very long (maybe 20-40 tiles?) and snake randomly across a layer, so you don't need to expose every tile to find them, far from it.  The trick is to know where to start looking, and for that you need to identify the stone layers present on your map. First, use the two techniques described above - with the second, you're trying to see what [[layer]] stones are available to search, and with the first you're trying to see which of those layers can be skipped.  

Then go to the wiki article for the specific [[metal]] you are seeking - maybe [[iron]], maybe [[copper]] or [[zinc]], whatever.  There you will see, in the side-bar, what [[ore]](s) will produce that metal.  ([[Alloy]]s take may one additional step, to find all the necessary metals to make that alloy, but the process is the same.)  It's quite possible that more than one ore will produce the metal you want.  Then read up on the ore(s), and see what layers it's found in.  Compare that to the layers you have found on your map - where they are the same, that's where to look.  

Veins tend to be quite long and sinuous and so don't require detailed exploration to find, as opposed to gems which almost demand 100% revealing techniques.  Diagonal tunnels, maybe 10 or 15 apart, are a good approach, or square (E-W or N-S) tunnels dug maybe 9-wide apart, but a wider shaft pattern (on a 6 or 9 wide grid?) might get lucky as well.  ''(These numbers are chosen so they can later be filled in for 100% reveal - but they are not carved in stone, as it were. See and compare examples below.)''

:Example: You want to find iron. (Who doesn't?)
::[[Iron]] has 3 ores: [[hematite]], [[limonite]], and [[magnetite]].  Looking at those articles, we find that magnetite is easy - it's a [[large cluster]] (about 20x40!), centered in an area block of [[sedimentary]] layer stone - check that article to see what kinds of stone layers are "sedimentary".  If you have area blocks of sedimentary layers, center-punch a single shafts down through them and see.  Limonite is also found in sedimentary, but in veins - this will take some exploration through the entire layer, but because we are looking for veins we don't have to reveal everything, not even close.  Hematite is found in sedimentary as well, but also in [[Igneous extrusive]] layers - so that's another category of stone to check.  

Not all layers contain ''every'' ore they might contain, but ''if'' they do, that's where you'll find it.  If you have none of the necessary layers, there is ''no chance'' you will find veins of that ore.  You don't find iron ore in [[metamorphic]] layers unless it's extending from a different, nearby type - it just isn't there, period.  If you want even ''a chance'' for a specific type of ore, make sure the proper ore-bearing layer stone is present on your [[embark]] map!

(This general approach is also used to determine "where to mine next?", even if you ''aren't'' looking for anything specific.  Knowing that [[granite]] or [[gabbro]] has a better chance to pay off better than [[diorite]], and not to bother with the blocks with large clusters, gets your miners to the motherload that much faster.)

If all this is a bit overwhelming, and/or you have layers that seem "completely useless" - well, you might be right (on both counts), but [[The Non-Dwarf's Guide to Rock]] can be helpful in getting your feet back under you.  It's useful to know what might be found where, and when nothing will ever be found somewhere.

= Factors in exploratory mining =

These are the factors we shall consider for each digging pattern. Knowing them and deciding on their priority will help you find the most suitable pattern.
Most of the factors are represented by numbers, obtained by dividing two quantities. Others are more subjective.

=== Labor ===

''Labor'' is the amount of work that goes into the digging process. Exploratory mining is a work intensive process, capable of straining even a large fortress, but the work that goes into different patterns varies greatly. A fortress with a large supply of skilled miners can afford to consider labor low priority. The labor factor is the fraction of stone dug out of an area, and as such, it's a percentage, between 0 and 100%.

=== Scarcity ===

''Scarcity'' is the amount of desired material present in the rock layer. It's theoretically represented by the fraction of desired material in the soil layer, but one can seldom state it accurately or even estimate it. Scarcity is determined by the types of materials you're after. Single tiles are the scarcest, followed by small clusters, veins and large clusters. For the classification of your desired material, see the [[gem]] and [[stone]] articles. Underground features are about as scarce as large clusters. 

If you are after the precious gems: diamond, sapphire and ruby, you will see that these can be found only in [[kimberlite]] (diamonds) and [[bauxite]] (sapphires and rubies) respectively. So you only need to use one of the lower-visibility methods to find the veins of kimberlite in a [[gabbro]] layer or the large clusters of bauxite in [[sedimentary layer]]s respectively, and then dig those out using one of the patterns that reveals every tile.

In short, if the sought-after material is scarce, you want high visibility; if plentiful, covering a larger area, lower visibility methods will work.  

=== Visibility ===

''Visibility'' is the amount of tiles that you reveal in the digging process. Excavated tiles are always visible, and so are the tiles immediately adjacent to them, including diagonals. The purpose of exploratory mining is to make a single tile of the desired material visible, allowing you to switch to conventional digging and extract it and similar material connected to it. Visibility is represented by the fraction of visible tiles in the excavated area. Perfect visibility is not always a priority - it tends to decrease in importance as the size of the target increases, because there are fewer tiles that need to be dug out for the target stone to be found.  

With some patterns, it's possible to start with lower visibility, and then "fill in" for more complete visibility in the areas you wish to concentrate on.

To better understand this, see [[vein|veins and clusters]].

=== Re-usability ===

Exploratory mining leaves behind a monotonous, repeating underground landscape of shafts or tunnels. The excavated level may be hard to reuse for habitation, storage or industry without additional digging and significant rebuilding efforts that leave behind inferior walls that cannot be engraved. Re-usability is subjective, and it depends on the desired layout. Re-usability is represented by the largest room size achievable by digging into the solid rock left behind without rebuilding any walls. Re-usability is a priority for a small fortress.



= Exploratory Patterns =

Patterns are represented by a unit tile. This unit tile is repeated throughout the area intended for excavation to create the desired pattern. Each pattern is analyzed with the above factors in mind.

 Key:
 . = Mined (floor)
 x = Mined (shaft)
 ░ = Visible, not mined (wall)
 ▓ = Not mined, not visible

=== Hollow ===

All tiles are excavated.

* ''Labor'': 100% of the tiles are excavated.
* ''Scarcity'': Any scarcity. If it exists in the layer, it will be found.
* ''Visibility'': '''100%''' of the tiles are visible, obviously.
* ''Reusability'': Approaches zero, except for mass storage. Any design other than a large hall requires reconstruction.
* ''Bottom line'': Easy to designate, but miners tend to be a bit chaotic in their approach to the task.  Hollowing wastes labor like there's no tomorrow, but integrates extraction into the exploratory mining process. Use only if you have a lot of labor to spare, or need huge amounts of stone and don't mind the reconstruction required to make the hollow area habitable.

=== Rows ===
<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki>
░░░░░░ 
......
░░░░░░
░░░░░░
......
░░░░░░
</nowiki></div>
* ''Labor'': 1 per every 3 tiles (~33%) of the tiles are excavated.
* ''Scarcity'': Any scarcity. Clusters as small as a single tile are revealed.<br />
* ''Visibility'': '''100%'''.
* ''Reusability'': Very low. The long corridors aren't very useful, and can only be expanded to long, wide corridors.
* ''Bottom line'': Easy to designate, and a single miner will focus on one tunnel to the end or they take a [[break]]. This method achieves the same visibility as hollowing out, but using a mere third of the labor. Ideal for hunting single-tile gems. As an added bonus, it is more efficient than a 3&times;3 design.

Larger "tunnel" patterns are suggested to be dug in multiples of "3" to allow for later complete revealing with minimum effort.

=== Diagonal every 5 ===
<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki>
░░.░░░░.░░
░.░░░░.░░░
.░░░░.░░░░
░░░░.░░░░.
░░░.░░░░.░
</nowiki></div>
* ''Labor'': 20% of the tiles are excavated (1 per 5).
* ''Scarcity'': Any scarcity. Clusters as small as a single tile are revealed.
* ''Visibility'': '''100%'''.
* ''Reusability'': With a bit of imagination you can build nice 3x3 rooms
* ''Bottom line'': This method is 2nd most efficient of those with 100% visibility. This one doesn't use other levels to move from one spot to another but is annoying to designate.

A variation would put diagonals every 10 or 20, laying the groundwork to fill them in later for higher visibility if desired.

=== Mine shafts, grid of every 3 tiles ===

<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki> 
░░░░░░░░░
░X░░X░░X░
░░░░░░░░░
░░░░░░░░░
░X░░X░░X░
░░░░░░░░░
</nowiki></div>
* ''Labor'': 11.1% of the tiles are excavated (1/9).
* ''Scarcity'': Any scarcity. Clusters as small as a single tile are revealed.
* ''Visibility'': '''100%'''.
* ''Reusability'': It's easy to make into square rooms of various sizes, the stairways can be removed and used as doorways, or just carved out as part of the rooms.
* ''Bottom line'': You'll need to clear part of one layer above it to get it started (use one of the other methods to cover the area), but this method is the most efficient for those with 100% visibility, and has a great reuse value. Real dwarves' choice! It takes a lot of keypressing to designate, [[User:StrawberryBunny/Mineshaft.ahk|here]] is a ahk script to save your fingers. For a discussion on optimizing travel times through mineshafts, see [[Mineshaft Stitching|here]].

:'''See also:''' [[Mineshaft stitching]]

=== Pinwheel Shafts===

<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki> 
░░░░░░░░░░░
░XX░░X░░XX░
░░░░░X░░░░░
░░░▓░░░▓░░░
░X░░░░░░░X░
░X░░XXX░░X░
░X░░░░░░░X░
░░░▓░░░▓░░░
░░░░░X░░░░░
░XX░░X░░XX░
░░░░░░░░░░░


</nowiki></div>
* ''Labor'': In this example about 17.3% of the tiles are being excavated.
* ''Scarcity'': All except single-tile small clusters.
* ''Visibility'': '''96.6%'''.
* ''Reusability'': Workshops can be easily fitted into the unmined 3x3 areas.
* ''Bottom line'': Very similar to Mine Shafts, but you can replace the up/down stairways with alternating up stairs and down stairs on different levels, eliminating the chance that one of your dwarves will slip and fall all the way down the shaft to their deaths.

=== 7&times;7 blocks ===
<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki>

▓▓▓░.░▓▓▓▓▓░.░▓▓
░░░░.░░░░░░░.░░░
................
░░░░.░░░░░░░.░░░
▓▓▓░.░▓▓▓▓▓░.░▓▓
▓▓▓░.░▓▓▓▓▓░.░▓▓
▓▓▓░.░▓▓▓▓▓░.░▓▓
▓▓▓░.░▓▓▓▓▓░.░▓▓
▓▓▓░.░▓▓▓▓▓░.░▓▓
░░░░.░░░░░░░.░░░
................
░░░░.░░░░░░░.░░░
▓▓▓░.░▓▓▓▓▓░.░▓▓
▓▓▓░.░▓▓▓▓▓░.░▓▓
</nowiki></div>
* ''Labor'': 15/64 (~23%) of the tiles are excavated.
* ''Scarcity'': Veins and up, as the large 5X5 space left in each unit tile can easily conceal a small cluster.
* ''Visibility'': 39/64 (~61%) of the tiles are visible.
* ''Reusability'': Medium. The 7&times;7 blocks can easily be converted into 5&times;5 rooms, suitable for individual rooms, storage or workshops. Optionally, it can be converted into a grid of connected 7x7 rooms, if you center each room on a crossroad. Easily converted into a more thorough 3&times;3 block patten by digging through the large blocks.
* ''Bottom line'': This is a low-labor method great for vein-hunting. The low labor cost puts you in a position to invest more and get better coverage if desired.

If you think you may wish to later use the "rows" method (above) for 100% visibility, this could be based on a spacing of 6, 9, or 12.  Wider spacing starts to risk missing even veins and possibly underground rivers, though you will still certainly find underground features such as pools and magma vents even with tunnels spaced 24 apart.

=== 15&times;15 blocks ===
<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki>
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
░░░░░.░░░░░░░░░░░░░░░.░░░░░░░░░░
................................
░░░░░.░░░░░░░░░░░░░░░.░░░░░░░░░░
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
▓▓▓▓░.░▓▓▓▓▓▓▓▓▓▓▓▓▓░.░▓▓▓▓▓▓▓▓▓
</nowiki></div>
* ''Labor'': 31/256 (~12%) of the tiles are excavated.
* ''Scarcity'': Large clusters and up, as the large 13&times;13 space left in each unit tile can easily conceal quite a lot. Unless you have particularly bad luck you should also find all veins, but there is no guarantee.
* ''Visibility'': 87/256 (34%) of the tiles are visible.
* ''Reusability'': High. A 15&times;15 block of solid rock is extremely versatile when it comes to interior design. It's easily converted into a 7&times;7 block design, which may be further converted into a 3&times;3 block design.
* ''Bottom line'': This method is preferable when you are low on labor or when you're after an underground feature. It can easily accommodate parts of your fort, or serve as the precursor for a more thorough search.  A 12x12 or 18x18 version are also valid options, with obvious dis/advantages.

=== Mine Shafts on a 6-, 9-, 12-, or 15-grid ===

<div style="font-family: monospace; white-space: pre; line-height: 126.5%"><nowiki>
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓░░░▓▓▓▓▓▓▓▓▓▓▓▓▓░░░▓▓▓▓
▓▓▓▓▓░X░▓▓▓▓▓▓▓▓▓▓▓▓▓░X░▓▓▓▓
▓▓▓▓▓░░░▓▓▓▓▓▓▓▓▓▓▓▓▓░░░▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓░░░▓▓▓▓▓▓▓▓▓▓▓▓▓░░░▓▓▓▓
▓▓▓▓▓░X░▓▓▓▓▓▓▓▓▓▓▓▓▓░X░▓▓▓▓
▓▓▓▓▓░░░▓▓▓▓▓▓▓▓▓▓▓▓▓░░░▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
</nowiki></div>
* ''Labor'': from under 3% (1/36) for the 6-grid to less than 0.5% for the 15 grid (1/225).
* ''Scarcity'': Large clusters and up (as above), and magma pipes, magma pools, and underground pools.  Underground rivers only guaranteed with the 6 grid, but a wider grid could start and easily get lucky.  
* ''Visibility'': ''extremely'' low.
* ''Reusability'': High. Any area often needs a set of stairs (or more than one) leading up/down, and these would be the start of them.
* ''Bottom line'': This method should be used when you are looking for a large underground feature, or getting a feel for the various rock layers, or just hoping to get lucky with little effort.  Grids larger than 15 may start to miss even large features such as large clusters and pools, but can be used for identifying stone layers, and can always be filled back in later with shafts on a tighter grid.  (See "searching for undergound water & magma, below)

With any grid pattern, a (much) wider version could be used to start and to locate specific stone layers/areas, and then filled in later in a tighter pattern where you want if you're not lucky the first pass.  If you plan to use the 3-grid pattern (for a 100% tile reveal) later, create your grid with intervals that are a multiple of "3".  If you are only looking for veins, features or just don't care, then do as you will and play it by ear later.

=Searching for underground water & magma=
While a lot of fun, underground features can be both difficult to find and dangerous to the unprepared, being as they are full of hostile creatures. 

Magma is a rough circle usually about 20 tiles or more in diameter - a 12 grid is guaranteed to find one, a 15 is very unlikely to miss.  Magnetite (an iron ore) is found in sedimentary layers in large clusters that are even bigger and even easier to find.  Underground rivers are often only 5 tiles wide, damp stone included, and so the 6-grid may be necessary to find those.  

If you noted where these features were located before embark, on the local map, that helps immensely.  Each of these areas is 48 tiles across, and any feature such as a pool, pipe or river is enclosed completely within that area.  Digging a single shaft for large features in the exact center pays off most of the time.

====Digging====
Underground features are a lot larger than [[vein]]s and [[cluster|small clusters]], so the 15x15 block method is more than sufficient to find them. If you dig tunnels rather than shafts, you only need to dig every 3rd [[z-level]] out as even the shortest feature, a [[cave river]], can be discovered on any one of the 3 levels it influences with "warm" or "damp" stone, as shown in the side profiles below.

    Over the top    Reveals      Hits damp     Hits damp     Underneath    
     (misses)       (hits)        (hits)        (hits)        (misses) 
  
     _______o##     ########     #########     #########     #########      # Unmined stone
     ###  #####     ___o  ##     ####  ###     ####  ###     ####  ###      ~ Water
     ##<font color="blue">#~~#</font>####     ###<font color="blue">#~~#</font>#     __o<font color="blue">#~~#</font>##     ###<font color="blue">#~~#</font>##     ###<font color="blue">#~~#</font>##      _ Floor of the tunnel
     ###<font color="blue">##</font>#####     ####<font color="blue">##</font>##     ####<font color="blue">##</font>###     ___o<font color="blue">##</font>###     ####<font color="blue">##</font>###      o Miner
     ##########     ########     #########     #########     _______o#

Once you encounter warm or damp stone you want to back off a couple of squares and dig an up [[staircase]]. On this new z-level dig another tunnel to where you just found damp/warm stone. Depending on how tall the feature was and whereabouts you hit it, you may need to repeat this approach. Eventually your miner will reach a z-level where he can safely dig all the way through to the "surface" of the feature.

====Obsidian caps====
[[Image:obsidian_cap.png|thumb|right|100px|An obsidian cap]]
Even when a magma pipe reaches the surface it can freeze over in cold [[climate]]s, or may simply stop just short of surface. In theses case it will have a [[obsidian]] cap over it, which is easier to find: just search for any hills or mountainsides that have a circular chunk missing and/or a grey circle of stone (example on the right).


----
'''See also:''' 

[[Category:Guides]]

{{Mining FAQ}}