- v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
- Use this page to report any issues related to the migration.
Material science
v50.14 · v0.47.05 This article is about the current version of DF.Note that some content may still need to be updated. |
| Material properties |
| Defined: Value • Color • Density • Strain at yield • Temperature values |
| Derived: Magma safety • Fire safety |
| Fluids: Depth • Flow • Pressure |
Materials have a number of properties representing real world variables that describe how they respond to inputs. In particular, the game now has a number of variables that describe what happens to a material when it's put under stress.
What is stress?
In the real world, an object is stressed when a force is applied to the object. Depending on the nature of the force applied, this stress can take a number of forms, and the object can respond differently based on its material and how that material handles different stresses.
In the material raws, whenever you see 'yield', 'fracture', or 'strain at yield', that property is a stress-related quality.
When does Dwarf Fortress make stress calculations?
At present, DF seems to only apply forces during combat, and thus only stresses objects (generally armor and various body layers) at that time.
The first thing you'll notice is that the second word in each stress variable is one of Yield, Fracture, or strain at yield. These are mechanical performance terms.
The first set of words are things like Impact, Bending, and so forth. These describe modes of applying force.
The following explanations assumes real world physics sort of apply (since Toady One chose real world properties). The game doesn't use all of these properties yet, and may not be applying them according to real world physics.
Mechanical Performance Properties
Yield: This is almost certainly 'Yield Strength', which is the amount of stress needed to cause a material to go from elastic deformation to plastic deformation. (That is, if you cease stressing the object, does it revert to its original shape or not). Since most objects only elastically deform over small distances of deformation, high Yield values generally means it takes a lot of force to noticeably 'stretch' them (but see strain at yield).
Fracture: The fracture point is the amount of stress or force necessarily to cause the material to fail, or in other words, to break.
Strain at yield (sometimes incorrectly referred to as 'elasticity'): This variable tells you how much deformation occurs to the material while it is deforming elastically. That is, as long as the force is less than the yield strength, stress * strain at yield = deformation distance. The smaller the strain at yield, the less deformation occurs under stress.
Note: Strain at yield is the inverse of the Elastic Modulus. Thus a highly elastic material has low elastic modulus, and engages in less elastic collisions.
Modes of Applying Force
Impact: Force applied by a sudden strike, like a hammer.
Compressive: Force applied by exerting pressure on an object, like trying to squish something between your hands.
Tensile: Force applied by pulling on something, like suspending one object via another. (e.g., if you suspend an elf from a metal pole, you are applying a tensile force to the pole).
Torsion: Force applied by twisting something. Note that you're twisting some portion of the object relative to itself to cause a torsion stress to be applied to it. (Consider trying to twist a metal rod by grasping at either end and attempting to wring it - yes, you'd have to apply a lot of force to succeed).
Shear: Force applied by pushing part of the material so it tries to slide relative to another part of it. Ie, pushing at the top of an object when the bottom part is fixed to the ground is going to primarily apply a shear stress to it (the top part will try to move in the direction you push, and the lower part will resist this shear stress).
Bending: Force applied by bending a material.
Effects on Combat
The Dwarf Fortress combat system does not use all material properties at present (0.40.05). Weapon and armor damage/wear/decay is not tracked.
The formulae below have been reverse-engineered [1] [2] and experimentally proven [3] [4] by several independent researchers. Below are the simplified results; for more details see links above.
Attack Types
Both creatures and items can have [ATTACK] tokens. A creature can execute any of its natural attacks plus any attacks of the items it holds. The attacks marked with [EDGE] flag deliver edged damage which is governed by [SHEAR_*] tokens; they can be further differentiated by attack contact area: generally concentrated strikes (area of 50 or less) are considered stabbing while wider areas correspond to slashing attacks. This distinction shall be emphasized later.
Every other attack is considered blunt. [IMPACT_*] tokens affect blunt combat. Most specialised blunt weapons have small contact area; edged weapons generally also have blunt attacks with larger area values; items or creatures without defined attacks get default blunt attack with area = (size)^2/3. Under certain circumstances edged attack can be converted to blunt, but not otherwise.
Wrestling moves are special: breaking bones uses [BENDING_*] values, pinching utilizes [COMPRESSIVE_*] properties, and biting can deal [TENSILE] or [TORSION] damage depending on whether the attack is edged. Those attacks generally ignore armor.
Contact Area
Attack contact area is the minimum of weapon contact area and armor/layer contact area. Body parts have areas dependant on their size, as with non-weapon items; part size is creature size times relative size of the part in proportion to whole body.
| Body part | Relative size (human) | Kobold | Elf | Human | Troll |
|---|---|---|---|---|---|
| Total | 100% | 20000 | 60000 | 70000 | 250000 |
| Upper body | 18% | 3599 | 10818 | 12621 | 43133 |
| Lower body | 18% | 3599 | 10818 | 12621 | 43133 |
| Neck | 1.8% | 359 | 1081 | 1262 | 4313 |
| Head | 5.4% | 1079 | 3245 | 3786 | 12939 |
| Upper arm | 3.6% | 719 | 2163 | 2524 | 8626 |
| Lower arm | 3.6% | 719 | 2163 | 2524 | 8626 |
| Hand | 1.4% | 287 | 865 | 1009 | 3450 |
| Upper leg | 9.0% | 1799 | 5409 | 6310 | 21566 |
| Lower leg | 7.2% | 1439 | 4327 | 5048 | 17253 |
| Foot | 2.2% | 431 | 1298 | 1514 | 5175 |
Armor size is calculated as underlying body part size times coverage/100% times size/100 times 1+(UPSTEP+UBSTEP+LBSTEP)/4; MAX count as 3 in the last sum.
| Item | Size multiplier | Body part | Dwarf | Human | Extra body parts covered (humanoid) | Notes |
|---|---|---|---|---|---|---|
| Cap | 0.05 | Head | 162 | 189 | none | Cloth |
| Mask | 0.1 | Head | 324 | 378 | none | Cloth |
| Helm | 0.3 | Head | 973 | 1135 | none | |
| Leather armor | 0.3 | Upper body | 3245 | 3786 | Lower body, neck, upper arms, upper legs | leather |
| Mail shirt | 0.225 | Upper body | 2434 | 2839 | Lower body, neck, upper arms, upper legs | Chain |
| Breastplate | 0.2 | Upper body | 2163 | 2524 | Lower body | |
| Gauntlets | 0.25 | Hands | 216 | 252 | Lower arms, fingers | |
| Leggings | 0.2625 | Lower body | 2839 | 3313 | Upper legs, lower legs, toes | Chain |
| Greaves | 0.2625 | Lower body | 2839 | 3313 | Upper legs, lower legs, toes | |
| Low boots | 0.25 | Feet | 324 | 378 | Toes | |
| High boots | 0.3125 | Feet | 405 | 473 | Lower legs, toes |
Attack Momentum
DF uses momentum-based combat physics, so the momentum plays central role in calculations. Since momentum equals velocity times mass, and lighter items can be swung faster, attack momentum is largely independent from weapon weight. The simplified formula is as follows:
M = Str * Vel / ( 106/Size + 10*F/W ),
where:
- Str is creature strength (e.g. 1250 for average dwarf)
- Vel is weapon's velocity modifier if present (e.g. 1.25x, 2x)
- Size is normal creature size (e.g. 60000 for dwarves)
- F is "fatness modifier" (also includes muscle); dwarf with weight of 66000 will have F=66000/60000=1.1
- W is weapon weight in kilograms (Γ).
There is also a hard velocity limit that might skew these calculations, but it's actually impossible to reach in unmodded game. (Well, okay, if you're a zombie adventurer with maxed out strength you might reach the limit using an adamantine whip -- but why?)
Momentum can be further increased with weapon skill, status effects, attack modifiers etc.
Ranged Attacks
Attacks from missile launchers are entirely dependent on launcher's [SHOOT_FORCE] and [SHOOT_MAXVEL] tags. Specifically, as long as projectile is heavy enough, it is fired with momentum of SHOOT_FORCE/20; if this would make its speed exceed SHOOT_MAXVEL, it is capped at this value instead. (As usual, momentum = velocity times weight.)
Vanilla bolts and arrows end up with momenta of 49, as long as their density exceeds 1670. Divine ammo has momentum of 30, bone and most wood get 15, and adamantine bolts have only 6. Wooden darts usually have 5.
Weapon Traps
Traps always have a fixed attack velocity of 200, no matter the weapon weight; the momentum thus is 200 times weight.
Attack Momentum Costs
The attack generally needs some momentum threshold to break through each armor/tissue layer. If the attack is edged, it also can cut through it instead. For latter it has to have momentum no less than:
M >= (rSY + (A+1)*rSF) * (10 + 2*Qa) / (S * Qw),
where:
- rSY is the ratio of layer's to weapon's SHEAR_YIELD
- rSF is ditto with SHEAR_FRACTURE
- A is attack contact area
- S is weapon material sharpness multiplier (1x for most metals, 1.2x for divine metal, 1.5x for glass, 2x for obsidian, 10x for adamantine and 0.1x for all other materials)
- Qw is quality sharpness multiplier (1x for normal quality, 1.4x for fine, 2x for masterwork (or artifact) etc.)
- Qa is armor quality multiplier (same but x3 for artifacts)
Should it exceed this value, attack momentum is decreased by some 5% and the layer is considered punctured/severed. Calculations then repeat for the underlying layer. Otherwise damage is converted to blunt just for this layer and proceeds as following.
Blunt attacks can be entirely deflected by armor if weapon's IMPACT_YIELD is especially low relative to armor's density:
2 * Sw * IYw < A * Da,
where Da is armor material's density (in g/cm3), A is attack contact area, Sw is weapon size and IYw is its impact yeild in MPa (i.e. raw value divided by 106).
Otherwise, attack must have minimum momentum of:
M >= (2*IF - IY) * (2 + 0.4*Qa) * A,
where IF and IY are layer's impact fracture and impact yield in MPa, Qa is armor quality multiplier and A is contact area as above. Again, on success layer is considered thrashed, momentum is reduced by about 5% and next layer is tested.
If both edged and blunt momenta thresholds haven't been met, attack is permanently converted to blunt and its momentum may be greatly reduced. Specifically, it is multiplied by SHEAR_STRAIN_AT_YIELD/50000 for edged attacks or IMPACT_STRAIN_AT_YIELD/50000 otherwise. I.e., most metals reduce blocked attacks by 98%-99%; but see below.
Elastic Material Modifiers
Clothing with [STRUCTURAL_ELASTICITY_*] tokens has its stress properties modified.
Items with [STRUCTURAL_ELASTICITY_CHAIN_ALL] or metallic items with [STRUCTURAL_ELASTICITY_CHAIN_METAL] have their [*_STRAIN_AT_YIELD] increased to 50000, which means that blocked attack will not be dampened; it still may be converted to blunt, however. Metal leggings and chainmail shirts have this property in vanilla.
Items made of cloth (including adamantine!) with [STRUCTURAL_ELASTICITY_WOVEN_THREAD] additionally have their SHEAR values reduced to negligible 20-30 kPa. This makes candy clothing especially useless in combat. Caps and all clothing have this tag in vanilla.
Penetration Depth
This is also very important parameter. Please write something about it.
Pulping
Pulping appears to work by evaluating the layers in a body part. If each layer meets any one of the following criteria then the body part is pulped:
- 100% bruised/burned/frostbite/melt/necrosis/blister/boil/freeze/condense (i.e. 10000+ in layer_effect_fraction)
- 250% dented (i.e. 25000+ in layer_dent_fraction)
- 100% cut (i.e. 10000+ in layer_cut_fraction) (cut in this case is synonymous with fracture)
Spines, skulls, and perhaps other body parts have the [PREVENTS_PARENT_COLLAPSE] token which prevents the parent body part (such as the head, upper body, or lower body) from being pulped until the sub-part is broken. It appears that only external body parts can be pulped, not internal organs. You will find that boneless body parts that don't contain a spine/skull part will pulp VERY easily (i.e. eyes/ears).
There does not appear to be any distinctions between the combat text descriptions of the pulping, beyond the messages being appropriate to the weapon used (edged, blunt, or creature body part).
Material and item properties
As can be seen from above, importance of different material/item properties greatly varies in different scenarios. Below are some guidelines to estimating weapon/armor merit.
- When dealing with dwarf-sized targets, layer contact areas usually lay in 200~10000 range. The majority of vanilla weapons, however, has contact areas either below or above that (dagger is the lone exception); it therefore can be said, as a rule of thumb, that weapons with area of five or six digits assume their target's contact area, whereas the others use their own.
- Weapon weight matters very little past a certain threshold: for example, platinum war hammer in dwarven hands only gets about 12% more momentum over a steel one, despite being thrice as heavy. (Adamantime hammer, however, only has 1/7th as much.) Thus, since all common weapon metals have about the same density, it can be safely ignored.
- The only exception are weapon traps, which are much more effective with heavy weapons loaded.
- Shear yield doesn't actually matter. Even with dagger/bolt's contact area of 5 it contributes only ~15% to piercing cost, and since it equals about half of shear fracture for most metals, it can be approximated as such without much error.
- Blunt weapons only use impact yield value. Impact fracture protects from blunt attacks instead. Curiously, layer impact yield actually decreases blunt fracturing cost, so lower yield is better for armor.
- Most dedicated blunt weapons cannot be deflected by anything but slade, so their impact yield can in fact be ignored.
- Chain mail cannot block attacks via momentum cost thresholds; it still can blunt slashing attacks and then deflect them. Thus, the best defence can be reached by wearing dense (like copper) mail shirt under a rigid (like candy) one.
- Strain at yield values are used in comparsion to 50000. Since all metals have much less strain values than this, they all can be considered to have zero elasticity.
- Adamantine clothing is absolutely useless as armor.
With that in mind, here are some numbers for vanilla weapon/armor materials:
| Material | Density | IY | 2*IF - IY | SF | Elasticity | Sharpness | Bolt | adj. | Sword | adj. | Mace | min M | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Adamantine | 0.20 | 5.00 | 5.00 | 5.00 | 0 | 10 | 6 | 300 | 9 | 450 | 31 | 200 | |
| Bone/shell | 0.50 | 0.20 | 0.20 | 0.13 | <1% | 0.1 | 15 | 0.20 | 19 | 0.25 | 60 | 8 | |
| Bronze | 8.25 | 0.60 | 1.08 | 0.24 | <=1% | 1 | 49 | 12 | 75 | 18 | 138 | 43 | |
| Copper | 8.93 | 0.25 | 1.30 | 0.22 | <1% | 1 | 49 | 11 | 77 | 17 | 138 | 52 | |
| Divine metal | 1.00 | 1.00 | 3.00 | 2.00 | 0 | 1.2 | 30 | 72 | 31 | 74 | 86 | 120 | |
| Glass | 2.6 | 1.00 | 1.00 | 0.04 | 4%/<1% | 1.5 | -- | -- | 53 | 3.2 | 116 | 40 | |
| Iron | 7.85 | 0.54 | 1.62 | 0.31 | <1% | 1 | 49 | 15 | 75 | 23 | 137 | 65 | |
| Leather | 0.50 | 0.01 | 0.01 | 0.03 | 100% | -- | -- | -- | -- | -- | -- | 0.4 | |
| Obsidian | 2.67 | 1.00 | 1.00 | 0.04 | 4%/<1% | 2 | -- | -- | 54 | 4.3 | 117 | 40 | |
| Platinum | 21.4 | 0.35 | 1.05 | 0.20 | <1% | 1 | -- | -- | 86 | 17 | 145 | 42 | |
| Silver | 10.49 | 0.35 | 0.84 | 0.17 | <1% | 1 | 49 | 8.3 | 79 | 13 | 140 | 34 | |
| Slade | 200 | 4.00 | 6.00 | 5.00 | <1% | 0.1 | -- | -- | 93 | 46 | 149 | 240 | |
| Steel | 7.85 | 1.51 | 3.54 | 0.72 | 2%/<1% | 1 | 49 | 35 | 75 | 54 | 137 | 142 | |
| Wood | 0.50 | 0.01 | 0.01 | 0.04 | 2% | 0.1 | 15 | 0.06 | 19 | 0.076 | 60 | 0.4 |
Clarifications:
On the left side of the table there are some raw values. Density and impact yield are important for a blunt weapon; 4th column is adjusted impact fracture that appears in the formula for blunt defense. Shear fracture is important for edged attacks and defense. Elasticity is in %s of 50000; as you can see, it is universally low.
On the right side there are some typical weapon momenta. From left to right: bolt momentum; ditto multiplied by SF and sharpness (signifies piercing ability); short sword momentum in dwarven hands; ditto multiplied by sharpness and SF; dwarf swinging a mace; and minimum momentum some mace needs to break through armor of this material.