23a:Chasm

v50.14 · v0.47 · v0.34 · v0.31 · v0.28 · v0.23.130.23a

This article is about an older version of DF.

xTATTEREDx · +FINE+ · *SUPERIOR* · ≡EXCEPTIONAL≡ · ☼MASTERWORK☼

A miner has found a large chasm cleft through the mountain.

The chasm is the second major landmark encountered within the mountain (the first being the Template:L). Like the river, you must build a Template:L over it to get past it. This obstacle is between 3 and 5 spaces wide, and angles between 148 to 200 spaces from the cliff face. The chasm tends to make sharper turns than the river, and its offshoots are always straight and between 1 and 2 spaces wide.

The chasm is home to several aggressive Template:Ls – primarily ratmen, batmen, and antmen, though on rare occasions, you may not have any creatures in your chasm. These monsters usually mount assaults of 5 to 20 or more creatures at a time. Each assault will consist of just one type of creature (e.g. only ratmen, or only batmen), and after the first few assaults, only one type of creature will appear from then on. If you kill enough of their number (hundreds?), or pour enough Template:L (water will not work) into the chasm, it will eventually get a red line running down its center, meaning all the creatures have been killed.

The chasm can be used as an unlimited refuse dump. From the orders menu, select refuse to specify which types of refuse should be chasmed. Chasming refuse is hazardous, however, as it incites attacks from the chasm-dwellers. If you then chasm the carnage of the battle, more attacks will occur, which can lead to almost constant assaults.

If you wish to expediently clear the refuse left over from such battles without chasming it, it can be a good idea to construct a large, enclosed refuse Template:L right near the chasm. Building a Template:L near this stockpile can allow you to turn out thousands of Template:L Template:L or Template:L and keep the stockpile from completely filling up.

Once you have a Template:L, you can select specific items to be chasmed (not just refuse) from the Template:L menu.

Chasm monsters

The monsters from the depths are:

As mentioned earlier, chasming Template:L will trigger attacks from chasm-based creatures, though you will get some attacks without provocation. These creatures can also emerge from wells placed after the cave river.

Attacks from trolls are very rare, but can be dangerous. Trolls are strong and are capable of destroying buildings (including Template:Ls and Template:Ls). Gremlins can throw levers, which can lead to all sorts of havoc, so hide your levers behind a door and a trap or two. But be warned, Gremlins themselves do not set off traps.

Chasm defense strategies

Dust off and nuke 'em from orbit

It's the only way to be sure.

Of course, Dwarves haven't quite figured out the art of enriching uranium--or, for that matter, shaping explosives--so we'll have to come up with alternative method of making a parking lot out of the chasm.

Fortunately, Template:L, being as utterly destructive as it is, makes for a GREAT surrogate thermonuclear weapon, as alluded to in the introductory paragraph of this article. What you do is more or less what you do with your farm, with some small differences. The steps are more or less as follows:

Dig an entrance to the Template:L. It doesn't matter what size.
Place a floodgate there, adjacent to the magma.
Build a channel from the floodgate to your chasm-flood area. It is simple enough to bridge a magma-filled channel with stone or any metal bridge, so you need not worry about impairing the movement of your dwarves.
Dig a very wide entrance to the chasm that meets your channel.
Place a floodgate at the other end, making sure your miner has a way out (or not). (Alternatively, just dig out your entire chasm-flood room as a channel. A filled channel next to the chasm will flood the chasm.)
Link up the floodgates to a lever.
Pull the lever.

The magma should flow from the river to the other floodgate, and expand into your entrance area, deluging the chasm in magma. Should your stupid novice miner install a floodgate while he's on the *wrong* side of it, you can either opt to leave him there, allowing the magma to instakill and save him from another death in the future (likely to be far worse than being covered with liquid rock) or you could have him dig back to your main tunnel, and block off the magma with a *rock* door, as it will be sufficient to halt the flood of molten death.

For a while, this will increase attacks from the chasm. Eventually, though, a red line will appear up and down the middle of the chasm. Congratulations, you've made a parking lot out of the thing.

To avoid all retaliatory attacks while you nuke the chasm, you can seal it off by digging a channel which covers every exposed portion on the west side of the chasm. Build an aqueduct to bring magma across the chasm and pipe it into this channel. (You can also build a floodgate pointed at your existing bridge(s); the flow will cross the bridge, but be stopped by the channels.)

Most chasm-dwellers cannot cross a magma-filled channel, and will die without ever being seen. However, the occasional troll might be able get across it, so line the channel with some traps just to be extra safe.

To nuke or not to nuke

Nuking the chasm will clear it of all life forms, including the potentially valuable Template:Ls. However, ratman raids are one of the game's best source of Template:Ls, and bone Template:L are indispensible for training Template:L. Additionally, you will eliminate the possibility of capturing a Template:L and harvesting its incredibly valuable silk. If you take the precautions listed below, you can render the chasm quite harmless, without needing to destroy it altogether.

"Safety net" bridges

The greatest danger from chasm attacks is the risk of falling into the chasm. Totally healthy dwarves, even elite Template:Ls, can be shoved (or simply dodge) off the edge during combat with depressing ease. The greatest defense against this is to erect several bridges covering the chasm above and below your main "crossing" bridge(s). This does not require a tremendous amount of material, as the chasm itself is usually quite narrow (3-5 squares in width). If you're a really competent bridge builder, make drawbridges that lift to form walls north and south of your main bridge.

Traps

The chasm's monsters are numerous but weak, and can usually be killed by a single stone-fall Template:L. A phalanx of traps 2-4 squares deep on either side of your bridges can kill just about anything that emerges from the chasm. These might not save an unlucky dwarf stranded in the center of a bridge during an ambush, although if he or she can survive long enough to get across the bridge, the traps will kill all pursuers.

Weapon traps require more resources to build than stone-fall traps, although they do not need to be reloaded once triggered (just Template:Led). They are also much more effective against magma creatures that may wander as far into your fortress as the chasm.

War dogs

Template:L a few war Template:Ls beside your bridges will further bolster their safety. A single dog can usually kill several chasm creatures, and take the heat off any unfortunate dwarves that may be on the bridges during an ambush. Even better, a war dog that attacks a batman while it is over the chasm will usually cause the batman to plummet to his doom. Currently, though, if you chain a wardog to a restraint, *all* of your war dogs will stop breeding until you get a dog from the human caravan.^[Verify]

Barracks placement

Building a Template:L right next to the chasm just off your main corridor will make it likely that at least a few of your soldiers will be in its vicinity at all times. Off-duty soldiers spar and practice on Template:Ls in the barracks quite often, and others will sleep there. If you place the barracks on the opposite side of your main Template:L, your soldiers will cross the chasm bridges often en route to getting Template:L or Template:L.

It may also be useful to mine a narrow corridor leading from the barracks directly to the chasm. Attackers from the chasm will often attack on multiple fronts (if there are any available). Connecting your barracks directly to the chasm will often cause the attackers to split their forces between the bridges and your barracks, where there are likely to be soldiers waiting in ambush.

Trapped accessways

Since monsters will often appear at multiple points along the chasm when given the chance, you can create short trap-lined accessways from your main corridor to the chasm. These should not connect to any bridges so that your dwarves will not use them, but they will draw attackers away from your bridges into deadly passageways. You can also trap the corridor connected to your barracks, if you have built one.

Fortified positions

Engraving Template:Ls which face your bridges and stationing soldiers in these positions can provide an additional layer of defense. Your fortified position can be the barracks itself, which will spare you the need to constantly assign and relieve soldiers -- at least a few off-duty marksdwarves are likely to be in your barracks at any given time, especially if you do not group them into Template:Ls.

Doors

As a last line of defense, you can enclose the areas leading to your bridges with Template:Ls. These can be locked instantly, at will, to keep attackers from penetrating further into your fortress. You can then direct your soldiers to head for the chasm, and reopen the doors when they are in position. It is also recommended you put doors on any side accessways in case the attackers get past the traps. These doors should normally remain unlocked so that the attackers will be lured into the passageways.

If the corridor leading to the chasm is quite wide, you can still fully span it with doors by temporarily locking the door you are building off of, then unlocking it after the new door is built. Another way to build lines of doors works by placing statues, then attaching doors to them. You can either place the statues in line with the doors (door-door-statue-door-door-statue, etc.), or place them behind the doors, then remove them once the doors are built -- allowing you to span a passageway of any width with an uninterrupted line of doors.