40d Talk:Design strategies

Perhaps these explanations of how the various mining commands work should go under a Mining article. "Design strategies" seems like it would be more about layouts for kitchens and pump systems and whatnot. --BahamutZERO 19:43, 30 October 2007 (EDT)

I have inadvetently written an article on Digging which complements the work on this page. I suggest they be reviewed and relevant parts merged. This page will have a use in future for players to post their designs. I agree with BahamutZERO that this isn't the place to talk about Mining. --Markavian 22:41, 31 October 2007 (EDT)

Flooded Entrance

I'd like to see some sample shots of that Flooded Entrance setup. It's my understanding that the screw pump only pulls water up, not pump it down. Maybe he meant a floodgate for dropping the water down a level. --Vinic 16:27, 2 November 2007 (EDT)

I think what he had was two rooms--one is the actual entrance way, sealed by doors--that have pumps on the level above, dumping thier output into a channel that leads into the room they aren't pumping from.--Draco18s 16:43, 2 November 2007 (EDT)

Sorry if I was ambiguous in my wording. Hopefully the accompanying screenshot removes any confusion in how it works. --Lucid 11:38, 3 November 2007 (EDT)

The idea is good but what I saw on those screenshots had immediately looked flawed to me. Even back when siege AI was broken trolls wandered to my experimental flood-the-sigers device (ironically) and quickly destroyed both the screw pump and the windmill. I am sure that they will also try to break any accessible axles and gears. So you should modify the design to keep all building destroyers (ideally including flying ones but not necessary as dragons are really rare and demons are avoidable) from leaving you with a permanently flooded entrance. The problem can be even worse with lava.--Another 17:59, 16 December 2007 (EST)

Choice of location

I think we should get some information up here on selecting a proper site to start digging your fortress. Sort of a list of ideal criteria to look for on the actual map after you've arrived, taking into account things like elevation, natural rock formations, water and magma, and accessibility. Sort of a guide to the ultimate defense, I suppose. --Xazak 14:47, 3 November 2007 (EDT)

Seconded. That would be indeed useful. --UltimaPhantom 13:43, 8 November 2007 (EST)

Defense Designs

I think we should have separate page for defense schemes such as the new trap designs using machines and wall patterns and such. Jikor 06:29, 9 November 2007 (EST)

Nifty designs?

Not sure if this is right page, but I'd love a step-by-step about building arenas. Runspotrun 09:24, 13 November 2007 (EST)

Workshop layout

Why are the inputs placed so far off the hallway in the "Wio" design? Wouldn't it make more sense to have a 'ladder' layout where each rail was a hallway and each rung was "iWo", so that haulers had easy access to both piles? Or better yet, a hallway with input stockpiles below the workshops, and another with output stockpiles above the workshops? I think the layout presented is pretty inefficient given the new 3rd axis.

This page is strange to edit

If you edit a section of the page, it totally screws up the formatting of the entire page. I think it might have to do with the code and pre tags. Julius 14:21, 13 November 2007 (EST)

I stripped out the code and pre tags and replaced them with leading spaces to preserve fixed width formatting.Julius 14:34, 13 November 2007 (EST)

Access to Trade Depot

I thought it would be a good idea to have a seperate three-tile wide entrance to have the trade depot underground, behind defences, with a single tile wide access from a store-room for finished goods.

HOWEVER: If the drawbridge blocking the three-wide entrance is raised: the human merchant wagons bypass my settlement!

Maybe, closed drawbridges need to be included as accessable in the pathfinding algorithm?

Yes, my "Access to depot" screen is totally different with the drawbridge up vs down. It should be the same though.GarrieIrons 07:14, 8 February 2008 (EST)

Radial Design

I've been using a radial design that works superb. The entire fortress is designed around a principle somewhat similar to that presented in the 'Moody Dwarves' section on the main page. With a single staircase running up and down the entire fortress, which everything is connected around.

The floors alternate workshop/storage. On workshop floors the diagonals immediate to the main stairway are mined out a couple spaces to make room for the first workshops; around those I start mining in straight lines and start a grid pattern. Storage floors I leave the wall of stone around the staircase with only one or two walls mined out for access and put doors there; everything around this is mined out. First floor is usually farm workshops, kennel, barracks, and dining. On the ground level I start by mining into a cave, clear out space for a trade depot, and mine out one spot where I build a single downward staircase; here the entire fortress starts. It works great and is very efficient, though it takes a while to get setup right.

For defense I prefer to locate the starting digging point up high and build a bridge to an inaccessible area of cliff. The bridge is retracted as invaders stream across it. Again, it takes a while to get started because you have to build a huge bridge, but worth it. The sole entrance to your fortress is also a single down stairway (unless you have backdoors or additional stairways), making it somewhat easy to defend here too.

I'm still a noob, so I'm sure people can add to this, but of my several fortresses the one I went with this design on has been my favorite and I think best operating establishment.

Below you can see a piece from around the central staircase, to see how the design should start. Notice that it is pretty modular, you can have two workshops pushed together, or you can separate them all, and you have a couple options on how you set up your entrances, connecting two workshops with one door, or leaving them with separate entrances. Up to you. Notice the initial diagonal terminates at a workshop, and starts the grid pattern. W= workshop D= door ┼= path `= wall Template:Qd Template:Qd Template:Qd

Omnirizon 23:59, 28 February 2008 (EST)

---

I started using this design, but ran into a small problem: For some reason, even with all four diagonals leading into the room, they're unable to build a workshop though. I've so far only tried a mason's workshop since I'm interested in getting rid of all my excess stone by turning it into blocks for roads and walls (I want to have smooth roads and walls), and no matter which square I stick it in, they say that they "Cannot reach the work site" once they begin building. [1] There's a link to a picture of the layout thus far. The workshop is in the bottom square, and when completed would only block out access from the top-right corner, still allowing traffic via the top-left corner. It even says they cannot reach the site if I stick it in the far north square, where both current entrances would remain intact. Why is it doing this? --Urthdigger 04:44, 11 October 2008 (EDT)

I haven't tried this setup myself and I don't know why it didn't work for you, but solving it ought to be rather easy simply by not extending the diagonals beyond the initial hallways, like so:

█WWW█.█████.█WWW██
█WWW█.█████.█WWW██
█WWW█.█WWW█.█WWW██
██▓██.█WWW█.██▓███
......█WWW█.......
██████▓███▓█▓███▓█
WWWWWW█.█.█WWW█WWW
WWWWWW██X██WWW█WWW
WWWWWW█.█.█WWW█WWW
████▓█▓███▓███████
......█WWW█.......
██▓██.█WWW█.██▓███
█WWW█.█WWW█.█WWW██
█WWW█.██▓██.█WWW██
█WWW█.█WWW█.█WWW██
█████.█WWW█.██████
█████.█WWW█.██████
█████.█████.██████

You'd get an unsmoothable section of workshop wall, but it's better than nothing. It'd also allow you to incorporate a door if you were adapting the design a bit. Kirig Stonebeard 00:46, 24 February 2009 (EST)

Beware: Traffic Problems

I think that one of the biggest mistakes new fortress designers make is not leaving enough space for traffic. If you build a fortress that is too compact/tight, you'll begin to see problems when you have 80+ dwarves all running around. This will be especially problematic in fortresses that use single width hallways. I'd suggest using 4-wide for main arteries, 3-wide for secondary roads, and 2-wide at minimum for anything other than a work/access tunnel.

Gairabad's shameless self-promotion

I added a bunch of stuff to my user page on workshop layout design. In my humble opinion, it blows all the existing designs on this page right out of the water. You're welcome to incorporate it if you like. Gairabad 21:17, 28 November 2008 (EST)

Cave Adaptation

Not sure why, but when I follow the intructions on this section the stairway ends up listed as 'inside' and 'light'. As I understand it, unless it says outside it won't work.

I noticed that the instructions as listed say to replace the channeled area with flooring, that may be a missunderstanding there. This is in response to the person talking about things being inside anyway. I will try to give it a try soon and see what I get. Anyway, on to my actual comment. The posting mentions that telling dwarves to stay inside forbids them from using the stairs, a possible way arround this is to make sure that the exit has a door of some sort (since it is suggested to build a wall at the top level anyway) and then when you tell all dwarves to stay inside, lock the door, then tell them they can go outside again. Burlingk 23:39, 10 February 2009 (EST)