v50 Steam/Premium information for editors
  • v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
  • Use this page to report any issues related to the migration.
This notice may be cached—the current version can be found here.

v0.34:Metal

From Dwarf Fortress Wiki
Jump to navigation Jump to search
This article is about an older version of DF.

Metal is a material extracted from ore at a smelter, turning the ore into bars of pure metal. (One special metal becomes wafers instead of bars.) It is sometimes combined with other materials to form an alloy metal, which is also measured by the bar. An alloy usually improves on the properties of its components to give more uses or increased value. The metal bars resulting from smelting are used to make items such as weapons, armor, furniture, and crafts at a forge.

Smelting pure ores into the corresponding bars raises the base value from that of stone (3) to that of bars (5). This value is then multiplied against the material multiplier of the metal to give the final value for the bar.

Alloys

There are only eleven pure metals in Dwarf Fortress (plus a twelfth special metal). Many of these can be mixed together to create alloys of one type or another, of which there are another fourteen. In some cases making alloys will result in an overall increase in value, or the resultant alloy will be more powerful when used to forge weapons or armor, though many alloys result in no overall increase in utility or created wealth. (These increases in value can be compared in the "Difference" column of the below table.)

There are many uses for alloys:

  • Increased performance for armor or weapons.
  • Stretching your supply of scarce metals.
  • Creating items with distinct colors (for instance, rose gold is magenta) for furniture, color-coding rooms or levers, or artistic constructions (including floor mosaics).
  • Increasing happiness or perceived room value for a dwarf who particularly likes a given alloy.
  • Decreased fuel consumption if making the alloy directly from ores (e.g. bronze requires only one smelter task to make 8 bars from 2 ores).

The number of bars used to create an alloy always equals the number of bars produced: the number of bars input equals the number of bars of output. However, the number of bars produced from smelting ores is four times greater (X ores in = 4X bars out).

List of metals

Pure Metals

Metal
Name
Tile
Color
Source Ore(s) or Reaction Density (g/cm3) Melting point Material
value
Value difference Notes and
Other Uses
Adamantine 3:3:1 Raw adamantine 0.200 25000°U 300 +50 Can be used to forge anything except beds;
Blades are 10x sharper than any other material
Aluminum 7:7:1 Native aluminum 2.70 11188°U 40 +0
Bismuth 5:5:1 Bismuthinite 9.78 10488°U 2 +1 Only useful for alloying into bismuth bronze
Copper 6:4:0 Native copper, Malachite, Tetrahedrite 8.93 11952°U 2 +0, +0, -1* Can be used to forge all weapons, armor, ammunition, and picks
Gold 6:6:1 Native gold 19.32 11915°U 30 +0
Iron 0:7:1 Hematite, Limonite, Magnetite 7.85 12768°U 10 +2 Can be used to forge all weapons, armor, ammunition, picks, and anvils
Lead 0:7:1 Galena 11.34 10589°U 2 -3*
Nickel 7:3:0 Garnierite 8.80 12619°U 2 +0
Platinum 7:7:1 Native platinum 21.40 13182°U 40 +0
Silver 7:7:1 Native silver, Horn silver,
Galena (50%), Tetrahedrite (20%)
10.49 11731°U 10 +0, +0,
+5*, +7*
Can be used to forge melee weapons and ammunition
Tin 7:3:0 Cassiterite 7.28 10417°U 2 +0
Zinc 7:3:0 Sphalerite 7.13 10755°U 2 +0

Alloys

(Unless specified, ores of the ingredients may be used instead of bars for alloy reactions)

Metal
Name
Tile
Color
Source Ore(s) or Reaction Density (g/cm3) Melting point Material
value
Value difference Notes and
Other Uses
Billon 7:3:0 Silver + Copper 8.93 11952°U 6 +0 Can be made with Tetrahedrite or Galena instead of Silver for a high value reaction.
Bismuth bronze 6:6:1 1 Tin + 2 Copper + 1 Bismuth ! 8.25 11868°U 6 +4 Can be used to forge all weapons, armor, ammunition, and picks
Black bronze 5:6:0 2 Copper + 1 Silver + 1 Gold ! 8.93 11952°U 11 +0 Unique color
Brass 6:6:1 Zinc + Copper 8.55 11656°U 7 +5
Bronze 6:4:0 Tin + Copper 8.25 11868°U 5 +3 Can be used to forge all weapons, armor, ammunition, and picks
Electrum 6:6:1 Silver + Gold 8.65 11828°U 20 +0 Can be made with Tetrahedrite or Galena instead of Silver for a high value reaction.
Fine pewter 7:7:1 3 Tin + 1 Copper 7.28 10417°U 5 +3
Lay pewter 3:7:0 2 Tin + 1 Copper + 1 Lead ! 7.28 10417°U 3 +1 Unique color
Nickel silver 7:7:1 2 Nickel + 1 Copper + 1 Zinc ! 8.65 11620°U 3 +1
Pig iron 0:7:1 Iron + flux stone + fuel ! 7.85 12106°U 10 +0 Only used to make steel
Rose gold 5:5:1 3 Gold + 1 Copper ! 19.32 11915°U 23 +0 Unique color
Steel 0:7:1 Iron + Pig iron + flux stone + fuel ! 7.85 12718°U 30 +20 Can be used to forge all weapons, armor, ammunition, picks, and anvils
Sterling silver 7:7:1 3 Silver + 1 Copper ! 10.49 11602°U 8 +0
Trifle pewter 7:3:0 2 Tin + 1 Copper 7.28 10417°U 4 +2

Legend:

  • Tile Color corresponds to how items made from that metal are displayed in game, foreground and background colors.
  • Reaction indicates the basic recipe for an alloy - this does not include the fuel used in that creation. See the article for that alloy or smelting for possible alternatives.
! - You can use only bars of metal in this reaction, not ores.
  • Density is used to determine the different weight of finished objects.
  • Melting point is used to determine if a material is magma-safe or not: magma is 12000°U.
  • Material value is what the base value of an object made of this metal is multiplied by to determine its worth.
  • Value difference indicates the difference between the average value of the required bars of metals vs. the value of the resulting bars of alloy - what went in vs. what comes out, measured per bar. "+0" indicates that the resulting alloy is a perfectly average value of the component metals. For pure metals, this indicates the difference in value between the metal and the ore, separated with commas in cases where multiple ore values differ.
* - Values marked with an asterisk denote ores that can yield multiple metals. For metals that have a less than 100% chance of production, the stated value increase is for occasions on which metal is produced; on average, the difference in value from smelting either tetrahedrite or galena is +1.

Weapon and armor quality

Metal Value Density Impact yield Impact fracture Impact elasticity Shear yield Shear fracture Shear elasticity Notes
Adamantine 300 0.200 5000 5000 0 5000 5000 0 Can be used to forge anything except beds;
Blades are ten times as sharp as any other material aside from obsidian
Steel 30 7.85 1505 2520 940 430 720 215 Can be used to forge all weapons, armor, ammunition, picks, and anvils
Bismuth bronze 6 8.25 602 843 547 172 241 156 Can be used to forge all weapons, armor, ammunition, and picks
Bronze 5 8.25 602 843 547 172 241 156 Can be used to forge all weapons, armor, ammunition, and picks
Iron 10 7.85 542 1080 319 155 310 189 Can be used to forge all weapons, armor, ammunition, picks, and anvils
Copper 2 8.93 245 770 175 70 220 145 Can be used to forge all weapons, armor, ammunition, and picks


Silver 10 10.49 350 595 350 100 170 333 Can be used to forge melee weapons and ammunition
Bone 1 0.50 200 200 100 115 130 100 Can be used to make crossbows, ammunition and some armor
Wood 1 0.50 10 10 1000 40 40 1000 Can be used to make crossbows, ammunition and some armor and weapons
Shell 1 0.50 200 200 100 115 130 100 Can be used to make some armor
Plant cloth 1 1.52 10 10 100000 600 600 100000 Can be used to make clothing
Silk cloth 1 0.50 10 10 100000 1150 1200 100000 Can be used to make clothing
Wool cloth 1 0.50 10 10 100000 60 120 100000 Can be used to make clothing
Leather 1 0.50 10 10 50000 25 25 50000 Can be used to make armor


  • Combat information is used internally by the game to determine the combat properties of weapons and armor made from this metal:
Density: Used in conjunction with other factors - heavier weapons (higher numbers) hit with more force, light weapons tend to have less penetration. Value shown here is g/cm3, which is the raw value divided by 103
Impact yield: Used for blunt-force combat; higher is better. This is the raw value divided by 103 (i.e., kPa).
Impact fracture: Used for blunt-force combat; higher is better. This is the raw value divided by 103 (i.e., kPa).
Impact elasticity: Used for blunt-force combat; lower is better. This is the raw value.
Shear yield: Used for cutting calculations in combat; higher is better. This is the raw value divided by 103 (i.e., kPa).
Shear fracture: Used for cutting calculations in combat; higher is better. This is the raw value divided by 103 (i.e., kPa).
Shear elasticity: Used for cutting calculations in combat; lower is better. This is the raw value.
  • General Term Explanations (From Wikipedia)
Yield Strength - The stress at which material strain changes from elastic deformation to plastic deformation, causing it to deform permanently.
Fracture Strength - The stress coordinate on the stress-strain curve at the point of rupture.


Stress - Force per area = F/A
Strain - Deformation of a solid due to stress = Stress/Young's Modulus

So...

Explanations!
Yield Strength is the amount of stress required to permanently deform (bend) a material (plastic deformation)
Fracture Strength is the amount of stress required to permanently break (rupture) a material
Elasticity (or IMPACT_STRAIN_AT_YIELD in RAWs) is the amount of deformation (bending) that occurs at the yield point
Implications to Dwarf Fortress Combat
Yield combined with Elasticity can tell what a material will do under stress (be it from a hammer, axe, or arrow)
Higher yield means that it takes more stress to deform
Lower elasticity means that it will deform less when stress is applied

Preliminary Combat Testing & Analysis

Adamantine and Steel take first and second place respectively, with Iron the third best material in the game. Beyond which, bronze is in a close tie with copper as to being the second worst material. As in older versions, silver continues to hold steady as the worst material available (no longer beneficial with wooden training weapons being available now) in regards to edged weaponry. Additionally, with regards to blunt weapons almost all of the non-adamantine materials perform equally well, with a very slight edge towards steel and silver. Here is the thread with the details:

http://www.bay12forums.com/smf/index.php?topic=53571.0

Keep in mind with how unbelievably complicated this system is nothing should be taken as word of law yet.

Best Better Good Fair Poor Terrible Notes
Armor Adamantine Steel Iron Bronze, Bismuth Bronze Copper
Edged Weapons Adamantine

(worst for missiles)

Steel Iron Bronze, Bismuth Bronze Copper Silver For piercing iron armor, copper is better than bronze. For piercing copper or bronze armor, bronze is better than copper.
Blunt Weapons Steel, Silver Copper, Bismuth Bronze, Bronze, Iron --- --- --- Adamantine All six non-adamantine metals perform nearly identically. Steel has a slightly higher rate of critical wounds, while silver is slightly more likely to penetrate armor.

Cross referencing this table with the table at the top of this section seems to indicate that low densities, high impact fractures, and high shear fractures contribute to the killing power of edged weapons

See also some outstanding research on armor vs. different weapon types by Shinziril.