v50 Steam/Premium information for editors
  • v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
  • Use this page to report any issues related to the migration.
This notice may be cached—the current version can be found here.

Difference between revisions of "Advanced world generation"

From Dwarf Fortress Wiki
Jump to navigation Jump to search
 
(195 intermediate revisions by 37 users not shown)
Line 1: Line 1:
{{Quality|Exceptional|18:16, 23 August 2014 (UTC)}}
+
{{migrated article}}
 +
{{Quality|Superior}}
 
{{av}}
 
{{av}}
{{old}}
+
:''This article contains information on advanced world generation. For information on basic world generation, see [[World generation]].''  ''See [[World token]] to more easily find information by the names used in the world_gen.txt file, [[World rejection]] for information on solving problems related to worlds always being rejected, and [[Worldgen examples]] for example worlds.''
  
:''This article contains information on advanced world generation. For information on basic world generation, see [[World generation]].''
+
[[File:adv_worldgen_v50.png|thumb|400px|right|The advanced world generation screen.<br><small>''(Click to enlarge)''</small>]]'''Advanced world generation''', also labeled as '''detailed mode''', allows substantially more detail-oriented options of customization than standard, basic world generation. This gives the player much more control over how their world is generated. To better understand this article, it is advised that one should read about [[World generation|'''basic world generation''']] first.
:''See [[World token]] to more easily find information by the names used in the world_gen.txt file.''
 
:''See [[World rejection]] for information on solving problems related to worlds always being rejected.''
 
:''See [[Worldgen examples]] for example worlds.''
 
  
When you want more control of what your world looks like, it's time for '''advanced world generation'''. A detailed reference with advice is provided below. This article assumes that you are already familiar with [[World generation|'''basic''' world generation]]. If you are not then please read about that first.
+
The advanced world generation screen is reached by clicking "Create new world" at the main menu, then clicking "Detailed mode". Once at that screen, clicking "Basic options" will return the user to the standard world generation screen.
 
 
Once you select {{DFtext|Design New World With Advanced Parameters}} from the main menu, a screen that looks something like this will appear:
 
 
 
[[File:AdvancedWorldGen.png‎]]
 
 
 
This screen is relatively intuitive but some parts could use some explanation.
 
  
 
== Parameter sets ==
 
== Parameter sets ==
 +
The list of already-defined parameter sets is in the upper-left. You can select the current set that you want to work with using the drop down menu. Any parameter set can be renamed by clicking the [[File:Quill.png]].
  
The list of already defined parameter sets is in the upper right corner. You can select the current set that you want to work with using the up and down directional keys.
+
Parameter sets can be made by clicking "New parameter set" or by clicking "Copy" to copy the selected set. This will append the selected set to the drop down menu and automatically select that set for editing.
 
 
Hitting {{K|a}} will add a new set to the end of the list. You can also {{K|c}}opy an existing set to a new one allowing you to base a new set on an existing one. Using {{K|t}} you can change the name of the parameter set but note that this will not affect the name of the world that is generated.
 
  
Parameter sets are stored in the <tt>data/init/world_gen.txt</tt> file in the main DF directory. The {{K|F1}} and {{K|F6}} keys will load and save '''all''' of the parameter sets to this file. You will need to save the world gen parameters to this file before you hit {{K|Enter}} to generate the world.
+
Parameter sets are stored in the <tt>prefs/world_gen.txt</tt> file in the main DF directory. The "Save" and "Load" buttons in the upper-right of DF will save or load '''all''' of the parameter sets in this file. The <tt>world_gen.txt</tt> file can also be edited with a text editor. This is useful for parameter sets posted on the forum or wiki in text form. (See [[Advanced_world_generation#Parameter_Set_Examples|Parameter set examples]] below.)
  
The <tt>world_gen.txt</tt> file can also be edited with a text editor. This is particularly useful because people will often post their parameter sets on the forum or wiki in text form. (See below for more info.) The {{K|F1}} key comes in handy when editing this file while the game is still running.
+
The tokens used in <tt>world_gen.txt</tt> are at the bottom of each parameter description. Here's the one for the title.
 
 
To get the parameters used to generate a world you are already playing press {{K|ESC}} then choose export images; exporting any image will also create the world generation parameter file, for more information see this [http://www.bay12forums.com/smf/index.php?topic=101280.msg4512541#msg4512541 post].
 
 
 
The tokens used in <tt>world_gen.txt</tt> are at the bottom of each parameter description. Here's the one for title.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 43: Line 30:
 
== World name ==
 
== World name ==
  
As previously mentioned, the title of the parameter set doesn't affect the name of the world. You can force a particular name for your world using {{K|n}} or set it back to the default random setting using {{K|N}}.
+
As previously mentioned, the title of the parameter set doesn't affect the name of the world. You can specify a particular name for your world using {{K|n}} or set it back to the default random setting using {{K|N}}.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 58: Line 45:
 
== World dimensions ==
 
== World dimensions ==
  
The size of the map to be generated can be selected with {{K|u}} {{K|i}} {{K|o}} {{K|p}}. Larger maps take longer to generate and may limit [[Frames per second|FPS]] in game.
+
The size of the map to be generated can be changed by changing the Width and Height values. Larger maps take longer to generate and may limit [[Frames per second|FPS]] in-game.
  
Changing the dimensions of the world will reset the parameters because many of them have different defaults depending on the surface area available.
+
Changing the dimensions of the world will reset the parameters, because many of them have different defaults depending on the surface area available. Creating larger worlds does not necessarily mean longer world generation time - the essential factor for the gen duration is the history. If you restrict the number of historical events, you can significantly speed up the process.
 
 
Creating larger worlds does not necessarily mean longer world generation time. The essential factor for the duration is the history. If you restrict the number of historical events you can significantly speed up the process.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 72: Line 57:
 
| <tt><nowiki>[DIM:<width>:<height>]</nowiki></tt>
 
| <tt><nowiki>[DIM:<width>:<height>]</nowiki></tt>
 
| <tt><nowiki>[DIM:129:129]</nowiki></tt>
 
| <tt><nowiki>[DIM:129:129]</nowiki></tt>
| Valid values are 17, 33, 65, 129, and 257. Others may not work.
+
| Valid values are 17, 33, 65, 129, and 257. Others may not work. Non-square maps may result in crashes{{bug|2928}}.
 
|}
 
|}
  
Line 81: Line 66:
 
In older versions, the same seed value(s) produced identical worlds on every computer at any time (if other parameters were identical, too). In the current version, the seed values for the world itself and the names seem to produce the same result, but you will get changes in events which will result in a very different world history. It seems like the history is partly random and not completely connected to the seed. Keep this in mind if you want to regenerate a particular world.
 
In older versions, the same seed value(s) produced identical worlds on every computer at any time (if other parameters were identical, too). In the current version, the seed values for the world itself and the names seem to produce the same result, but you will get changes in events which will result in a very different world history. It seems like the history is partly random and not completely connected to the seed. Keep this in mind if you want to regenerate a particular world.
  
A specific seed value can be entered with {{K|s}}. This will change '''all''' of the seed values to the value you enter. If you need to enter different seed values for each type of seed, use {{K|e}}.
+
A specific seed value can be entered with {{K|s}}. This will change '''all''' of the seed values to the value you enter. If you need to enter different seed values for each type of seed, use {{K|e}}. In order to find out what seed values were used for the last world you generated, you can look at this screen. If you want to be able to tell someone else how to generate exactly the same world that you just generated, they will need all of the seed values listed under Last Param Set.
  
In order to find out what seed values were used for the last world you generated, you can look at this screen. If you want to be able to tell someone else how to generate exactly the same world that you just generated, they will need all of the seed values listed under Last Param Set.
+
When generating a world using a seed, the way that the world is generated is also based at least in part on certain world tokens. As such, you cannot for example, change the minimum and maximum rainfall and get 'the same world but drier or wetter', instead, a different world is generated. That said, it would also seem that certain small changes to these world tokens can occasionally generate a very similar world, however, other tokens are more sensitive. For more information see the forum thread [http://www.bay12forums.com/smf/index.php?topic=112132.msg3404199#msg3404199 here].
  
When generating a world using a seed, the way that the world is generated is also based at least in part on certain world tokens. As such, you cannot for example change the minimum and maximum rainfall and get the same world but drier or wetter, instead, a different world is generated. That said, it would also seem that certain small changes to these world tokens can occasionally generate a very similar world, however, other tokens are more sensitive. For more information see the forum thread [http://www.bay12forums.com/smf/index.php?topic=112132.msg3404199#msg3404199 here].
+
The following are tokens which appear to be involved in the implementation of the seed, and are not safe to change:
 
 
The following are tokens which appear to be involved in the implementation of the seed and are not safe to change:
 
  
 
* [DIM:X:X]  
 
* [DIM:X:X]  
Line 107: Line 90:
 
* [MINERAL_SCARCITY:X] {{cite talk/this|Mineral scarcity}}
 
* [MINERAL_SCARCITY:X] {{cite talk/this|Mineral scarcity}}
  
Many other world parameters such as end year and embark points can, however, be changed without it having any effect on the geography of the world generated from the seed values.
+
Many other world parameters, such as end year and embark points, can, however, be changed without it having any effect on the geography of the world generated from the seed values.
  
Normally you don't enter these seed values and the world generation process comes up with seed values based on some sort of "true" random information from things like random values in uninitialized memory, the current date/time, etc. If you have entered a seed value you can revert to all seeds being random using {{K|S}}.
+
Normally, you don't enter these seed values - the world generation process comes up with seed values based on some sort of "true" random information from things like random values in uninitialized memory, the current date/time, etc.
  
 
== Generating a world ==
 
== Generating a world ==
  
Unless you're using an already defined parameter set you will probably want to {{K|e}}dit the parameters. Select the set you want to edit using the up/down directional keys and press {{K|e}}. Information about each parameter is documented below.
+
Unless you're using an already-defined parameter set, you will probably want to edit the parameters. Information about each parameter is documented below. Once you are happy with the parameters you should save the values you just edited and proceed to the [[world generation]] process.
 
 
Once you are happy with the parameters you have set, hit {{K|Esc}} to get back to this screen, hit {{K|F6}} to save the values you just edited, and hit {{K|Enter}} to start. The rest of the process is the same as basic [[World generation]].
 
  
 
The phases of the world generation process are (this order is not completely correct):
 
The phases of the world generation process are (this order is not completely correct):
Line 147: Line 128:
 
== Editing the parameters init file ==
 
== Editing the parameters init file ==
  
Parameter sets are stored in the ''data/init/[[world_gen.txt]]'' file, using [[world token]]s. You can copy and paste other player's sets of parameters into your ''world_gen.txt'' to use their parameter sets, and some are provided at [[Main:Pregenerated worlds|Pregenerated worlds]]. Another place to find parameter sets is the [http://www.bay12forums.com/smf/index.php?topic=101280.0 Worldgen cookbook] thread on the official forums.
+
Parameter sets are stored in the ''prefs/[[world_gen.txt]]'' file, using [[world token]]s. You can copy and paste other players' sets of parameters into your ''world_gen.txt'' to use their parameter sets. Another place to find parameter sets is the [http://www.bay12forums.com/smf/index.php?topic=180805.0 Worldgen cookbook] thread on the official forums.
  
 
== Advanced parameters ==
 
== Advanced parameters ==
  
To access advanced parameters, press {{key|e}} when at the screen for creating new worlds with parameters screen. This will bring you to an editable list of various guidelines the world-gen process will use when creating your new world.
+
To access advanced parameters, press {{key|e}} when at the "Design New Worlds with Advanced Parameters" screen. This will bring you to an editable list of various guidelines that the world-gen process will use when creating your new world. The parameters are described below in the order that they appear in the list in the UI, not necessarily the order they appear in the configuration file.  
  
The parameters are described below in the order that they appear in the list in the UI, not necessarily the other they appear in the configuration file. See [[world token]] for an index that will help you look things up by token name.
+
See [[world token]] for an index that will help you look things up by token name.
  
 
There are essentially 4 types of controls for the generation of the surface map;
 
There are essentially 4 types of controls for the generation of the surface map;
  
'''Terrain Parameters''': as described below, these 5 variables define the basic background world, how hot or cold it is, how much rainfall, how high the mountains are. The world automatically goes through the temperature range along the Y axis although sometimes it will be hotter in the north, other times in the south. Minimum, maximum and X,Y variance can drastically alter the world.  
+
'''Terrain Parameters''': as described below, these 5 variables define the basic background world, how hot or cold it is, how much rainfall, how high the mountains are. The world automatically goes through the temperature range along the Y axis, although sometimes it will be hotter in the north, other times in the south. Minimum, maximum and X,Y variance can drastically alter the world.  
  
 
'''Weighted Meshes''': these are a way to fine-tune the amount of the 5 basic variables on the map. It can be used to set the specific distribution of different elevations or rainfall areas for example.  
 
'''Weighted Meshes''': these are a way to fine-tune the amount of the 5 basic variables on the map. It can be used to set the specific distribution of different elevations or rainfall areas for example.  
  
'''Rejection Parameters''': Dwarf Fortress has a belt-and-braces approach to world generation. The above controls allow you to shape the world, then the rejection parameters throw it out if it isn't right! There are a number of rejection parameters for the number and degree of the 5 basic variables, for biome types etc. If the world does not meet the requirements of any one rejection parameter the world is rejected and re-randomised. Also see [http://dwarffortresswiki.org/index.php/DF2012:World_rejection World Rejection]
+
'''Rejection Parameters''': ''Dwarf Fortress'' has a 'belt-and-braces' approach to world generation. The above controls allow you to shape the world, then the rejection parameters throw it out if it isn't right! There are a number of rejection parameters for the number and degree of the 5 basic variables, for biome types etc. If the world does not meet the requirements of any one rejection parameter the world is rejected and re-randomised. Also see [http://dwarffortresswiki.org/index.php/DF2012:World_rejection World Rejection]
  
There are also the feature-placing options such as rivers, mountain peaks, volcanoes and oceans. These can cause rejections if the terrain parameters don't allow enough suitable locations for the features to be placed.  
+
There are also the feature-placing options such as rivers, mountain peaks, volcanoes and oceans, which can cause rejections if the terrain parameters don't allow enough suitable locations for the features to be placed.  
  
If you are experimenting with world design, one method would be to disable the rejection parameters and use the first two control types. Otherwise any significant change will likely result in endless rejections.
+
If you are experimenting with world design, one method would be to disable the rejection parameters and use the first two control types. Otherwise, any significant change will likely result in endless rejections.
  
  
 
=== Seed values ===
 
=== Seed values ===
  
Here you can enter specific seed values for different parts of the world generation process. Different sequences of pseudorandom numbers are used for different parts, so you can use this to reproduce only the particular part of world generation from some previously generated world if you want.
+
Here, you can enter specific seed values for different parts of the world generation process - different sequences of pseudorandom numbers are used for different parts, so you can use this to reproduce only the particular part of world generation from some previously generated world, if you want. Normally, you'll want to leave all of these set to Random, unless you're specifically trying to reproduce the results of another world generation run.
  
Normally you will want to leave all of these set to Random unless you're specifically trying to reproduce the results of another world generation run.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 197: Line 177:
 
=== Embark Points ===
 
=== Embark Points ===
  
This controls the number of points that you have for skills and equipment when you embark in fortress mode. Turning this value up will allow games started in this world to start with more skilled dwarves with better equipment. Normally you can do just fine by leaving this value set to default, but you might want to up it for experimental/testing purposes or to help dwarves survive in a particularly evil world.
+
This controls the number of points that you have for skills and equipment when you embark in fortress mode. Turning this value up will allow games started in this world to start with more skilled dwarves with better equipment. Normally, you can do just fine by leaving this value set to default, but you might want to turn it up for experimental/testing purposes or to help dwarves survive in a particularly evil world, or turn it down for certain [[challenges]]. The highest amount this value can be set to is 10,000.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 212: Line 192:
 
=== End year ===
 
=== End year ===
  
This is how many years of history are generated for the world. This is basically the same as the History parameter in basic world gen, except that you can enter an exact value for number of years. See [[World_generation#History|History]] for more info.
+
This is how many years of history are generated for the world; basically the same as the History parameter in basic world gen, except that you can enter an exact value for the number of years. See [[World_generation#History|History]] for more info.
  
 
History is divided into "ages" which are determined by the ''percentage'' of megabeasts and semi-megabeasts killed at various points. One can attempt to make a world go through the ages more quickly by pumping up the ratio of semimegabeast to megabeast caves, the former of which are usually more killable than the regular megabeasts. This will net you more "Age of Legends", "Age of Heroes", etc.
 
History is divided into "ages" which are determined by the ''percentage'' of megabeasts and semi-megabeasts killed at various points. One can attempt to make a world go through the ages more quickly by pumping up the ratio of semimegabeast to megabeast caves, the former of which are usually more killable than the regular megabeasts. This will net you more "Age of Legends", "Age of Heroes", etc.
Line 231: Line 211:
 
=== Population cap after civ creation ===
 
=== Population cap after civ creation ===
  
This determines the maximum possible population of civilization member historical figures alive at a given time during worldgen. Not all members of a civilization are historical figures. This tag does not directly influence the total population of civilized beings as it once did when populations were all historical figures, so the description is a bit confusing. You can enter -1 to make the historical population unlimited.
+
This determines the maximum possible population of civilization member [[historical figure]]s alive at a given time during worldgen. Not all members of a civilization are historical figures. This tag does not directly influence the total population of civilized beings as it once did when populations were all historical figures, so the description is a bit confusing. You can enter -1 to make the historical population unlimited.
  
 
Each race may have up to 100 civilizations each, and each civilization a maximum population of 10,000. Civilizations, known as ''entities'' in the [[Raw file|raw files]], have 3 or 4 basic variables that will greatly affect their final placement on the world map. See [[Entity_token#Population|Population (Entity Token)]] for more information on interpreting/editing the raws if you need more precise control of civilization placement and total population numbers.
 
Each race may have up to 100 civilizations each, and each civilization a maximum population of 10,000. Civilizations, known as ''entities'' in the [[Raw file|raw files]], have 3 or 4 basic variables that will greatly affect their final placement on the world map. See [[Entity_token#Population|Population (Entity Token)]] for more information on interpreting/editing the raws if you need more precise control of civilization placement and total population numbers.
Line 250: Line 230:
 
=== Site cap after civ creation ===
 
=== Site cap after civ creation ===
  
This controls the maximum number of towns and similar sites on the entire map. Raising the number will allow for more towns, etc. though the number of sites will ultimately still be limited by things like space, terrain, and population cap.  
+
This controls the maximum number of towns and similar sites on the entire map. Raising the number will allow for more towns, etc. though the number of sites will ultimately still be limited by things like space, terrain, and population cap. Note that this parameter controls only '''"civilization" sites''' like [[town]]s - other sites, such as [[lair]]s, will be added onto this maximum. 
  
Note that '''this parameter controls only "civilization" sites''' like towns.  Other sites such as lairs will be added on to this maximum.  After civilizations reach this cap, they will not spread out anymore to place new cities.
+
After civilizations reach this cap, they will not spread out any more to place new cities. By default, the raws limit each civilization site to a population of 120, regardless of the race of the civilization - therefore, without editing the raws, the total population on the map can't go above site cap x 120.
  
By default, the raws limit each civilization site to a population of 120 regardless of the race of the civilization. Therefore, without editing the raws, the total population on the map can't go above site cap x 120.
+
Beware; increasing this too high can slow worldgen down by a lot. Another effect can be goblins (or certain [[Elf|other civs]]) sometimes overwhelming all other civilizations and/or flooding the world with their homes, leaving no good places to build your fortress, be it human or dwarven. If you choose a low cap to hasten world generation, the cap will likely be reached within years, stopping expansion of all civs. If you want a good, long history, you will have to adjust site/population cap and the number of civs many times to find one fulfilling your needs.
 
 
Increasing this too high can slow worldgen down by a lot, beware. Another effect can be goblins (or other civs) sometimes overwhelming all other civs and/or flooding the world with their homes leaving no good places to build your fortress. If you choose a low cap to hasten world generation, the cap will be reached within years stopping expanson of all civs. If you want a good and long history you will have to adjust cap of sites and population as the number of civs many times to find one fullfilling your needs.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 275: Line 253:
 
==== Percentage of Megabeasts and Titans Dead for Stoppage ====
 
==== Percentage of Megabeasts and Titans Dead for Stoppage ====
  
The world starts out with a certain number of powerful megabeast and titan entities in existence. If a percentage of the megabeast and titan population dies out during history generation, then history generation will stop early. For example, if the elimination value is 80%, and the generated history starts with 200 entities and 160 of those 200 entities are eliminated by historical events before the End Year is reached, history generation will stop early.
+
The world starts out with a certain number of powerful megabeast and titan entities in existence. If a percentage of the megabeast and titan population dies out during history generation, then history generation will stop early. For example, if the elimination value is 80%, and the generated history starts with 200 entities and 160 of those 200 entities are eliminated by historical events before the End Year is reached, history generation will stop immediately.
  
If you want to end the creation of your world at the beginning at a certain age, choose the following values:
+
If you want to end the creation of your world at the beginning of a certain age, choose the following values:
 
* Age of Legends: ~34%
 
* Age of Legends: ~34%
 
* Age of Heroes: ~67%
 
* Age of Heroes: ~67%
Line 284: Line 262:
 
==== Year to Begin Checking Megabeast Percentage ====
 
==== Year to Begin Checking Megabeast Percentage ====
  
The percentage of dead megabeasts and titans for stoppage will not be checked until this year is reached in history generation. This can be used to ensure that a world reaches a certain year even if all of the megabeasts in the world are slain earlier.
+
The percentage of dead [[megabeast]]s and [[titan]]s for stoppage will not be checked until this year is reached in history generation. This can be used to ensure that a world reaches a certain year even if all of the megabeasts in the world are slain earlier.
  
If the number of living megabeasts and titans starts at or drops to less than four, then world generation will always stop if the current year is equal to or greater than the Year to Begin Checking Megabeast Percentage ''regardless'' of how many meagabeasts and titans are dead — Percentage of Megabeasts and Titans Dead for Stoppage is ignored. The number of megabeasts and titans at the start of the world is set by the sum of the [[Advanced_world_generation#Max_Megabeasts_Caves|Max Megabeasts Caves]] and [[Advanced_world_generation#Titan_Parameters|Titan Number]] parameters.
+
If the number of living [[megabeast]]s and [[titan]]s starts at or drops to less than four, then world generation will always stop if the current year is equal to or greater than the Year to Begin Checking Megabeast Percentage ''regardless'' of how many [[megabeast]]s and [[titan]]s are dead — Percentage of Megabeasts and Titans Dead for Stoppage is ignored. The number of megabeasts and titans at the start of the world is set by the sum of the [[Advanced_world_generation#Max_Megabeasts_Caves|Max Megabeasts Caves]] and [[Advanced_world_generation#Titan_Parameters|Titan Number]] parameters.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 301: Line 279:
 
=== Cull Unimportant Historical Figures ===
 
=== Cull Unimportant Historical Figures ===
  
Whether or not the game ignores unimportant figures in history generation. The culling is many CPU-intensive steps in history generation but it saves memory and will speed up loading/saving games a bit. This does mean that the "unimportant" figures will not appear in Legends mode or in things like dwarf engravings, but they might not appear in engravings anyway.
+
Whether or not the game will ignore unimportant figures in history generation. The culling of unimportant historical figures is a CPU-intensive step in history generation but it saves memory and will speed up loading/saving games in fortress mode. This does mean that the "unimportant" figures will not appear in Legends mode or in engravings, but unimportant figures would likely not appear in engravings anyway.
  
Unimportant figures are people or creatures who suffer early deaths, never having offspring or killing anything named during history generation. For example, residents of goblin towers may get murdered by demons at a young age. After culling unimportant figures, Legends mode would say something like the demon has killed "a creature at Eviltower in the year 102."
+
Unimportant figures are creatures who suffer early deaths, never have offspring or kill a named creature during world gen. For example, a resident of a goblin tower may get murdered by demons at a young age. After culling unimportant figures, Legends mode would say "In the year 102, the demon Evil McEvilface killed an unknown creature at Eviltower."
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 318: Line 296:
 
=== Reveal All Historical Events ===
 
=== Reveal All Historical Events ===
  
Setting this to Yes will allow access to all information about the history of the world in Legends mode. If set to No, then you will have to discover historical information in adventure mode or by instructing dwarves to make engravings.{{Verify}}
+
Setting this to Yes will allow access to most information about the history of the world in [[Legends mode]]. All events will be revealed, but some [[historical figure]]s, [[site]]s, [[region]]s, and [[civilization]]s and other entities may not be, possibly because they are not known to any civilization. If set to No, then you will have to discover historical information in [[adventure mode]] or by instructing dwarves to make engravings.{{Verify}}
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 337: Line 315:
 
==== Minima and Maxima ====
 
==== Minima and Maxima ====
  
These are the absolute minimum and maximum values that can ever be generated for a particular map square characteristic. Changing these can cause the occurrence of certain [[Biome|biomes]] to become impossible, so modify these with care. Because of this problem, you may want to use [[#Weighted Ranges|Weighted Ranges]] instead.
+
These are the absolute minimum and maximum values that can ever be generated for a particular map square characteristic. Changing these can cause the occurrence of certain [[Biome|biomes]] to become impossible, so modify these with care. Because of this problem, you may want to use [[#Weighted Ranges|Weighted Ranges]] instead. By ''subtly'' tweaking the min and max values, vastly different maps can be made.
 
 
By ''subtly'' tweaking the min and max values, vastly different maps can be made.
 
 
 
==== X and Y Variance ====
 
 
 
These control how wildly things like elevation and rainfall can vary between adjacent map squares. For example, if these values are set to the maximum of 3,200 for elevation then you will end up with more very low areas right next to very high areas. The number for X determines the east-west variance and the number for Y determines the north-south variance. By setting only one of these to a high value you can, for example, create horizontal or vertical bands of areas which are more similar to each other.
 
 
 
Generally speaking, raising both of these values will create a more random "patchwork" of many small biomes while setting both x and y values to 0 will cause every square on the map to use a single random value for the given characteristic.
 
 
 
For "patchwork" worlds to avoid being rejected, [[#Maximum_Number_of_Subregions|Maximum Number of Subregions]] will probably need to be increased from the default.
 
  
 
==== Elevation ====
 
==== Elevation ====
Line 355: Line 323:
 
Usually you just want to leave the min/max values alone. Raising the minimum elevation can, for example, make it impossible for oceans to exist. This does '''not''' directly control the number of available Z-levels at a particular site, though high maximum values may contribute to peaks which can raise the number of above ground Z-levels. In other words, a maximum elevation of 400 and minimum of 1 does not mean you get 400 Z-levels but it might increase the number of Z-levels somewhat in some regions compared to others.
 
Usually you just want to leave the min/max values alone. Raising the minimum elevation can, for example, make it impossible for oceans to exist. This does '''not''' directly control the number of available Z-levels at a particular site, though high maximum values may contribute to peaks which can raise the number of above ground Z-levels. In other words, a maximum elevation of 400 and minimum of 1 does not mean you get 400 Z-levels but it might increase the number of Z-levels somewhat in some regions compared to others.
  
Raising the variance will result in a more bumpy uneven landscape.
+
Raising the variance will result in a more bumpy, uneven landscape.
  
 
Some biomes/features that are impacted by elevation:
 
Some biomes/features that are impacted by elevation:
 
* A high minimum (above 99) means no oceans as they need elevations below 100.
 
* A high minimum (above 99) means no oceans as they need elevations below 100.
 
* A low maximum (below 300) means no mountains as mountains need elevations above 300.
 
* A low maximum (below 300) means no mountains as mountains need elevations above 300.
* River start locations need a minimum elevation of 300. Therefore, a world with a maximum elevation of 299 everywhere prevents river generation, but rivers can still occur if maximum elevation is set to 300.
+
* Rivers will be placed when the elevation maximum is 104 or higher. Therefore, keeping both values above 100 and below 104 will prevent all water tiles from appearing.
*Mountain peaks can only form in squares with an elevation of 400.
+
* Mountain peaks can only form at elevations of 400.
 +
 
 +
==== X and Y Variance ====
 +
 
 +
These control how wildly things like elevation and rainfall can vary between adjacent map squares. For example, if these values are set to the maximum of 3,200 for elevation then you will end up with more very low areas right next to very high areas. The number for X determines the east-west variance and the number for Y determines the north-south variance. By setting only one of these to a high value you can, for example, create horizontal or vertical bands of areas which are more similar to each other.
 +
 
 +
Generally speaking, raising both of these values will create a more random "patchwork" of many small biomes while setting both x and y values to 0 will cause every square on the map to use a single random value for the given characteristic.
 +
 
 +
For "patchwork" worlds to avoid being rejected, [[#Maximum_Number_of_Subregions|Maximum Number of Subregions]] will probably need to be increased from the default.
  
 
==== Rainfall ====
 
==== Rainfall ====
  
Controls the amount of rainfall in each map square/area. Setting the minimum too high or the maximum too low can make the formation of certain biomes impossible. Rainfall causes it to [[Rain]] more in a given area, which can have various effects.
+
Controls the amount of rainfall in each map square/area. Setting the minimum or maximum too high or low can make the formation of certain biomes impossible. Rainfall causes it to [[rain]] more in a given area, which can have various effects. Also makes more rivers appear on the world map.
  
Also makes more rivers appear on the world map.
+
Note that if [[#Do Orographic Precipitation and Rain Shadows|orographic precipitation and rain shadows]] is on, then mountains will cause additional variance in rainfall, so (for example) rainfall below the specified minimum can occur in the shadow of a mountain.  If you want the minimum and maximum for this parameter to be absolutely respected, you must turn off the orographic precipitation option.
  
Note that if [[#Do Orographic Precipitation and Rain Shadows|orographic precipitation and rain shadows]] is on then mountains will cause additional variance in rainfall, so (for example) rainfall below the specified minimum can occur in the shadow of a mountain. If you want the minimum and maximum for this parameter to be absolutely respected you must turn off the orographic precipitation option.
+
Additionally, with 'Orthographic Precipitation' turned on, orthographic precipitation and rain shadows will only occur in regions with greater than or equal to 50 drainage. [http://www.bay12forums.com/smf/index.php?topic=139916.0 [Report, reproduced 2022]]
  
 
==== Temperature ====
 
==== Temperature ====
Line 375: Line 351:
 
These parameters control how hot or cold various areas will be. If you lower the minimum and maximum values, the world will be colder overall, for example. As with the others, changing these values too much could make it impossible for certain biomes to exist. See [[Climate]] for more info.
 
These parameters control how hot or cold various areas will be. If you lower the minimum and maximum values, the world will be colder overall, for example. As with the others, changing these values too much could make it impossible for certain biomes to exist. See [[Climate]] for more info.
  
[[Temperature]] is always influenced by elevation and, if [[Advanced_world_generation#Poles|Poles]] are enabled, latitude. So, the value from the temperature rolling process is ''not the absolute temperature value the region will get, but rather local variation.'' The "base" temperature for an area is derived from its latitude and elevation, and then the random value determined by these parameters are applied to it to make it vary a bit. The default values for the local variation are fairly small compared to the base temperature, which appears to be hard coded.
+
These parameters form the "base" temperature for an area, and describe peak summer temperature in a scale that isn't used elsewhere in the game. This number also does not correspond 1:1 with the final climate. [[Temperature]] is always influenced by a number of variables, including elevation, time of year, thick forestation, and if [[Advanced_world_generation#Poles|Poles]] are enabled, latitude. These other variables are factored in after the temperature mesh is applied, and frequently bring temperatures above and below their set minimum and maximum values. ''The inclusion of Poles is particularly strong in this regard, as it allows latitude to raise and/or lower temperatures by more than 75 degrees Celsius! That said, the temperatures aren't raised or lowered by more than about 65 degrees past the set minimum and maximum. Furthermore, for typical ranges, the temperature will never be raised more than about 25 degrees past the maximum (but will still drop up to about 65 degrees Celsius below the minimum).'' (unsure about exact values, research needed)
 +
 
 +
Elves can spawn where the temperature is 10 degrees or warmer. Humans can spawn where the temperature is 0 degrees or warmer.
  
 
==== Drainage ====
 
==== Drainage ====
Line 381: Line 359:
 
Changing drainage parameters will change the way water-affected biomes are formed. Low drainage will contribute to the formation of [[Lake|lakes]], [[River|rivers]], and [[Swamp|swamps]]. High drainage will cause water to sink into the ground rather than sit on the surface, which is important for forming hills.
 
Changing drainage parameters will change the way water-affected biomes are formed. Low drainage will contribute to the formation of [[Lake|lakes]], [[River|rivers]], and [[Swamp|swamps]]. High drainage will cause water to sink into the ground rather than sit on the surface, which is important for forming hills.
  
Lower drainage values have been reported to contribute to the formation of thicker soil layers though it is currently unknown exactly how other factors (such as elevation or perhaps rain) impact soil formation.
+
Lower drainage values have been reported to contribute to the formation of thicker soil layers, though it is currently unknown exactly how other factors (such as elevation or perhaps rain) impact soil formation.
  
 
==== Volcanism ====
 
==== Volcanism ====
  
Volcanism controls the occurrence of Igneous [[Layer|Layers]], and the formation of volcanoes. For a volcano to form, a square must have a volcanism value of 100 so reducing the maximum from 100 will make volcanoes impossible. Raising the minimum will increase the rarity of non-igneous layers.
+
Volcanism controls the occurrence of igneous [[layer]]s, and the formation of volcanoes. For a volcano to form, a square must have a volcanism value of 100, so reducing the maximum from 100 will make volcanoes impossible. Raising the minimum will increase the rarity of non-igneous layers.
  
Setting minimum to high value is not a good way to produce multiple volcanoes as you are likely to get a "Volcanism not evenly distributed" rejection. Instead use the Minimum Number of Volcanoes parameter and possibly adjust the weighted ranges for volcanism as described below.
+
Setting the minimum to a high value is not a good way to produce multiple volcanoes, as you are likely to get a "Volcanism not evenly distributed" rejection. Instead, use the Minimum Number of Volcanoes parameter, and possibly adjust the weighted ranges for volcanism as described below.
  
 
==== Savagery ====
 
==== Savagery ====
  
These parameters control the level of [[Surroundings#Savage|savagery]] on the map. Raising the minimum savagery too high may make it impossible for certain races to exist, and similarly lowering the maximum too far can make it impossible for certain creatures to exist. The largest chance of having unusable maps comes from too high of a savagery value.
+
These parameters control the level of [[Surroundings#Savage|savagery]] on the map. Raising the minimum savagery too high may make it impossible for certain races to exist, and similarly lowering the maximum too far can make it impossible for certain creatures to exist. The largest chance of having unusable maps comes from a too-high savagery value.
  
 
==== Configuration Tokens ====
 
==== Configuration Tokens ====
Line 428: Line 406:
 
=== Terrain Mesh Sizes and Weights ===
 
=== Terrain Mesh Sizes and Weights ===
  
These parameters make it possible to influence the number of squares in a particular range without making conditions outside of that range impossible. For example, you can make it possible for many more low elevation squares to exist without making it impossible for high elevations to form. Changing these parameters is often preferable to simply changing the min/max values.
+
These parameters make it possible to influence the number of squares in a particular range, without making conditions outside of that range impossible. For example, you can make it possible for many more low-elevation squares to exist without making it impossible for high elevations to form. Changing these parameters is often preferable to simply changing the min/max values.
  
 
The basic steps of applying weighted ranges are as follows:
 
The basic steps of applying weighted ranges are as follows:
  
 
# Create a grid with 2<sup>''MeshSize'' - 1</sup> tiles in both X and Y direction.
 
# Create a grid with 2<sup>''MeshSize'' - 1</sup> tiles in both X and Y direction.
# Set the intersection points of the grid lines to a random value according to the weighted ranges.
+
# At each grid intersection, set the value according to the weighted ranges.
 
# Smooth out the area between the intersection points.
 
# Smooth out the area between the intersection points.
 
# Add noise according to the variance parameters.
 
# Add noise according to the variance parameters.
  
Where ''MeshSize'' is the raw parameter value found in the world_gen.txt. See the image on the right for an example.
+
where ''MeshSize'' is the raw parameter value found in the world_gen.txt. See the image on the right for an example.
  
[[File:World_map-large-32x32-elevation-mesh.png|thumb|300px|A large world generated with an Elevation Mesh Size of 32x32 and range weights set to 1:0:0:0:1 (i.e., only extreme high and low elevations). Note how the grid intersections are either set very high or very low and the space between them is smoothed out.]]
+
[[File:World_map-large-32x32-elevation-mesh.png|thumb|300px|A large world generated with an Elevation Mesh Size of 32×32 and range weights set to 1:0:0:0:1 (i.e., only extreme high and low elevations). Note how the grid intersections are either set very high or very low and the space between them is smoothed out.]]
  
==== Mesh Size ====
+
==== Mesh Size/Weighted Ranges ====
  
Mesh size determines how many grid tiles there will be. Setting this to Ignore will cause the weighted range settings to be ignored for that terrain characteristic. As an example, setting it to 2x2 means the grid will be 2 times 2 tiles large and there will be 3 times 3 for a total of 9 intersection points. On a pocket world this means one grid tile will be 8 * 8 world tiles large whereas on a large world one grid tile will be 128 * 128 world tiles. Note that the highest possible value for a given world size will always make the grid tiles 8 * 8 world tiles large.
+
Mesh size determines how many grid tiles there will be. Setting this to Ignore will cause the weighted range settings to be ignored for that terrain characteristic. As an example, setting it to 2×2 means the grid will be 2 times 2 tiles large and there will be 3×3 for a total of 9 intersection points. On a pocket world, this means one grid tile will be 8×8 world tiles large, whereas on a large world, one grid tile will be 128×128 world tiles. Note that the highest possible value for a given world size will always make the grid tiles 8×8 world tiles large.
  
==== Weighted Ranges ====
 
  
 
If mesh size is set to something other than Ignore, these weights will be applied at the granularity of the selected mesh size for purposes of generating random values in each range. This allows random number generation to be non-linear for the given terrain characteristic.
 
If mesh size is set to something other than Ignore, these weights will be applied at the granularity of the selected mesh size for purposes of generating random values in each range. This allows random number generation to be non-linear for the given terrain characteristic.
Line 455: Line 432:
 
==== Interaction between Mesh Size and Variance ====
 
==== Interaction between Mesh Size and Variance ====
  
The end result can vary greatly depending on how the corresponding [[#X_and_Y_Variance|X and Y Variance]] parameters are set. First of all, if the variance is too large the noise it adds can completely negate the effect of the weighted ranges. For instance, with a 2x2 mesh, the default variance parameters are high enough that usually the mesh grid can hardly be recognized. How strong the variance's effect is also dependent on the mesh size. Having a larger mesh size (i.e. smaller grid tiles) means the variance also has to be higher for a visible effect. For instance, with a variance of 400, the effects are clearly visible with a 2x2 mesh and barely visible at all with a 8x8 mesh. Note that this effect is directly dependent on the mesh size and not, as one might expect on the actual size of the grid tiles. This means, that a large world with a 2x2 mesh will look essentially the same as a pocket world with a 2x2 mesh, only stretched to 256 times the size.
+
The end result can vary greatly depending on how the corresponding [[#X_and_Y_Variance|X and Y Variance]] parameters are set. First of all, if the variance is too large the noise it adds can completely negate the effect of the weighted ranges. For instance, with a 2×2 mesh, the default variance parameters are high enough that usually the mesh grid can hardly be recognized. How strong the variance's effect is, is also dependent on the mesh size. Having a larger mesh size (i.e. smaller grid tiles) means the variance also has to be higher for a visible effect. For instance, with a variance of 400, the effects are clearly visible with a 2×2 mesh and barely visible at all with a 8×8 mesh. Note that this effect is directly dependent on the mesh size and not, as one might expect, on the actual size of the grid tiles. This means, that a large world with a 2×2 mesh will look essentially the same as a pocket world with a 2×2 mesh, only stretched to 256 times the size.
  
 
Also see this [http://www.bay12forums.com/smf/index.php?topic=139916.0 forum post] for more details.
 
Also see this [http://www.bay12forums.com/smf/index.php?topic=139916.0 forum post] for more details.
Line 503: Line 480:
 
=== Poles ===
 
=== Poles ===
  
With this you can influence how polar regions are added. The poles can be on the north or south edge and the equator will be on the opposite edge or in the middle if there are two poles.
+
With this, you can influence how polar regions are added. The poles can be on the north or south edge, and the equator will be on the opposite edge, or in the middle if there are two poles. If poles are set to NONE, then there will be no seasonal changes in the weather (e.g. no winter snow in temperate biomes).
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 515: Line 492:
 
| Viable options: NONE, NORTH_OR_SOUTH, NORTH_AND_OR_SOUTH, NORTH, SOUTH, NORTH_AND_SOUTH
 
| Viable options: NONE, NORTH_OR_SOUTH, NORTH_AND_OR_SOUTH, NORTH, SOUTH, NORTH_AND_SOUTH
 
|}
 
|}
 +
 
=== Minimum Mountain Peak Number ===
 
=== Minimum Mountain Peak Number ===
  
This will cause the world to be rejected if fewer than this many peaks (based on elevation) are present on the map. Elevations of 400 must be possible for mountain peaks to occur. If set to zero then worlds will not be rejected based on number of peaks.
+
This will cause the world to be rejected if fewer than this many peaks (based on elevation) are present on the map. EG: elevations of 400 must be possible for mountain peaks to occur. If set to zero, then worlds will not be rejected based on number of peaks.
  
You may need to adjust elevation parameters, such as the highest weighted range, in order to get the desired number of elevation 400 squares needed for larger numbers of peaks. Like volcanoes, mountain peaks can make embark zones more interesting but other than that they don't appear to "do" anything special. Reportedly they do increase the highest Z-level above ground in all embark zones in the same region even if the selected embark zone does not include the peak.
+
You may need to adjust elevation parameters, such as the highest weighted range, in order to get the desired number of elevation-400 squares needed for larger numbers of peaks. Like volcanoes, mountain peaks can make embark zones more interesting, but other than that, they don't appear to "do" anything special. Reportedly, they do increase the highest Z-level above ground in all embark zones in the same region, even if the selected embark zone does not include the peak.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 551: Line 529:
 
This will cause a world to be rejected unless there are at least this many oceans which completely cover an edge of the map. Since a square map only has 4 edges, the maximum value possible is 4. If set to zero then worlds will not be rejected based on this criterion but still might end up with complete edge oceans by chance.
 
This will cause a world to be rejected unless there are at least this many oceans which completely cover an edge of the map. Since a square map only has 4 edges, the maximum value possible is 4. If set to zero then worlds will not be rejected based on this criterion but still might end up with complete edge oceans by chance.
  
Note that the ability for this many edge oceans to exist will be limited by elevation. Therefore, to actually create large oceans you will probably need to change things like the Elevation Mesh Size and Weighted Ranges to increase the number and distribution of very low elevation squares on the map.
+
Note that the ability for this many edge oceans to exist will be limited by elevation. Therefore, to actually create large oceans you will probably need to change things like the Elevation Mesh Size and Weighted Ranges to increase the number and distribution of very low elevation squares on the map. In addition, if Complete Edge Oceans is set to any value ''other'' than 0 or 4, you may need to lower elevation variance for at least one of the axes: if set too high, such as a variation of 1600 for both X and Y axes (the default for Large Island and Medium Island parameter sets), the game may generate worlds very slowly or even hang.{{bug|565}}
  
Given appropriate weight, range, and variance values for things like elevation, a setting of:
+
Given appropriate weight, range, and variance values for things like elevation, a setting of: 1 results in a world that seems like a chunk of coastline. One edge of the map will be completely underwater and there will be ocean taking up much of the map on that side (think the east or west coast of the United States, the north coast of Canada, or southern Europe).  If your edge ocean happens to pick your world's frozen side, most of it will be glacier.
*1 results in a world that seems like a chunk of coastline. One edge of the map will be completely underwater and there will be ocean taking up much of the map on that side.  Think the east or west coast of the United States, the north coast of Canada, or southern Europe.  If your edge ocean happens to pick your world's frozen side most of it will be glacier.
+
 
*2 results in another coastline along with the first one.  The map could end up looking something like Panama if the oceans pick opposite sides of the map.
+
*2 results in another coastline along with the first one -- the map could end up looking something like Panama if the oceans pick opposite sides of the map.
 
*3 results in a peninsula, like Florida in the US.  There will be oceans surrounding 3 sides of the map, and land touching only one side of the map.
 
*3 results in a peninsula, like Florida in the US.  There will be oceans surrounding 3 sides of the map, and land touching only one side of the map.
 
*4 results in one or more island(s) depending on things like elevation variance and weights. Regardless of whether you get one island or multiple islands, the entire map will be surrounded by water.
 
*4 results in one or more island(s) depending on things like elevation variance and weights. Regardless of whether you get one island or multiple islands, the entire map will be surrounded by water.
Unfortunately there's no easy way to control which oceans end up on which edges, except perhaps setting X and Y variance to different values.
+
 
 +
Unfortunately, there's no easy way to control which oceans end up on which edges, except perhaps setting X and Y variance to different values.
  
 
Edge oceans will take up part of the other edges too.  For example, a full edge ocean on the east side will have part of the north and south sides underwater, but that does ''not'' add to the ''partial'' edge oceans count.
 
Edge oceans will take up part of the other edges too.  For example, a full edge ocean on the east side will have part of the north and south sides underwater, but that does ''not'' add to the ''partial'' edge oceans count.
Line 590: Line 569:
 
=== Mineral Scarcity ===
 
=== Mineral Scarcity ===
  
Controls the frequency at which minerals occur. Setting this value lower will increase the amount of ore present on a map, the number of different types of ore, and the number/types of gems. The default value will result in a maximum of 2-4 metal ores per map (assuming you choose a good embark location) which may be limiting until the economy is fully implemented and desired metals can be traded for.
+
Controls the frequency at which minerals occur - setting this value lower will increase the amount and number of different types of ore present on a map, and the number/types of gems. The default value will result in a maximum of 2-4 metal ores per map (assuming you choose a good embark location) which may be limiting until the economy is fully implemented and desired metals can be traded for.
  
 
The options "Very Rare", "Rare", "Sparse", "Frequent", and "Everywhere" in the [[World_generation#Basic_World_Generation_Menu|basic world generation menu]] use the values 50000, 10000, 2500, 500 and 100 respectively.
 
The options "Very Rare", "Rare", "Sparse", "Frequent", and "Everywhere" in the [[World_generation#Basic_World_Generation_Menu|basic world generation menu]] use the values 50000, 10000, 2500, 500 and 100 respectively.
Line 598: Line 577:
 
[[File:MineralSetting_v25_limit10k.png]]
 
[[File:MineralSetting_v25_limit10k.png]]
  
This is for the same 8x8 embark region in a world which is otherwise the same except for the mineral scarcity parameter (although most of the detailed information comes from experiments with previous versions).
+
This is for the same 8x8 embark region in a world which is otherwise the same, except for the mineral scarcity parameter (although most of the detailed information comes from experiments with previous versions).
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 613: Line 592:
 
'''Note:''' as of v0.34, low mineral scarcity settings do not cause rejections.
 
'''Note:''' as of v0.34, low mineral scarcity settings do not cause rejections.
  
=== Max Megabeasts Caves ===
+
=== Max Megabeast Caves ===
  
This is the number of megabeasts placed at the beginning of history. Megabeasts are hydras, bronze colossuses, rocs and dragons which are all placed in equal proportions [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415177#msg3415177 <sup>data</sup>].  
+
This is the number of [[megabeast]]s placed at the beginning of history. Megabeasts are [[hydra]]s, [[bronze colossus]]es, [[roc]]s, and [[dragon]]s, which are all placed in equal proportions [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415177#msg3415177 <sup>data</sup>].  
  
 
Increasing this value can lead to early extinction of civilizations.
 
Increasing this value can lead to early extinction of civilizations.
Line 632: Line 611:
 
=== Max Semi-Megabeast Caves ===
 
=== Max Semi-Megabeast Caves ===
  
This is the number of semi-megabeasts placed at the beginning of history. Semi-megabeasts are giants, ettins, minotaurs, and cyclopes, which are placed in equal proportions [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415188#msg3415188 <sup>data</sup>].
+
This is the number of [[semi-megabeast]]s placed at the beginning of history. Semimegabeasts are [[giant]]s, [[ettin]]s, [[minotaur]]s, and [[cyclops]], which are placed in equal proportions [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415188#msg3415188 <sup>data</sup>].
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 642: Line 621:
 
| <tt><nowiki>[SEMIMEGABEAST_CAP:<number>]</nowiki></tt>
 
| <tt><nowiki>[SEMIMEGABEAST_CAP:<number>]</nowiki></tt>
 
| <tt><nowiki>[SEMIMEGABEAST_CAP:150]</nowiki></tt>
 
| <tt><nowiki>[SEMIMEGABEAST_CAP:150]</nowiki></tt>
| Semimegabeasts do not count towards BEAST_END_YEAR calculation.
+
| Semimegabeasts do not count towards the BEAST_END_YEAR calculation.
 
|}
 
|}
  
Line 649: Line 628:
 
==== Number ====
 
==== Number ====
  
This controls the number of titans that exist at the beginning of history[http://www.bay12forums.com/smf/index.php?topic=112465.msg3415203#msg3415203 <sup>data</sup>]. The number of forgotten beasts is unaffected by this parameter [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415155#msg3415155 <sup>data</sup>].
+
This controls the number of [[titan]]s that exist at the beginning of history[http://www.bay12forums.com/smf/index.php?topic=112465.msg3415203#msg3415203 <sup>data</sup>]. The number of forgotten beasts is unaffected by this parameter [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415155#msg3415155 <sup>data</sup>].
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 664: Line 643:
 
==== Attack Population Requirement ====
 
==== Attack Population Requirement ====
  
Megabeasts will begin to attack your fort once at least this many dwarves inhabit it, regardless of whether any other attack criteria have been met. This number defaults to 80 which isn't usually too difficult to deal with.
+
[[Titan]]s will begin to attack your fort once at least this many dwarves inhabit it, regardless of whether any other attack criteria have been met.  
 +
 
 +
This number defaults to 80, which isn't usually too difficult to deal with.
  
 
==== Exported Wealth Requirement ====
 
==== Exported Wealth Requirement ====
  
Megabeasts will begin to attack your fort once you have exported at least this many [[Currency|dwarfbucks]] worth of merchandise, regardless of whether or not any other criteria have been met. This parameter defaults to None (disabled).
+
Titans will begin to attack your fort once you have exported at least this many [[Currency|dwarfbucks]]-worth of goods, regardless of whether or not any other criteria have been met. This parameter defaults to None (disabled).
  
 
==== Created Wealth Requirement ====
 
==== Created Wealth Requirement ====
  
Megabeasts will begin to attack your fort once the fort's total wealth has reached this many [[Currency|dwarfbucks]] in value. This happens regardless of whether any of the other criteria, such as population, have been met; therefore, even with 1 dwarf, a fort could be attacked if the fort were worth at least this value.
+
Titans will begin to attack your fort once the fort's total wealth has reached this many [[Currency|dwarfbucks]] in value. This happens regardless of whether any of the other criteria, such as population, have been met; therefore, even with 1 dwarf, a fort could be attacked if the fort were worth at least this value.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 687: Line 668:
 
=== Number of Demon Types ===
 
=== Number of Demon Types ===
  
[[Demon|Demons]] are similar to titans and forgotten beasts in that they are procedurally generated, but unlike titans they are not unique. Thus many different types of demons will exist in the world but there will be many members of each type. Setting this to zero means no demons will exist, limiting the amount of fun you can have. Thanks to [[Underworld spire|certain fun things]], less demon types also means less goblin civilizations[http://www.bay12forums.com/smf/index.php?PHPSESSID=7348f68f41a9659443c05b2acf534e6c&topic=112465.15].You need at least 2 Demon Types or goblin civilizations won't exist.
+
[[Demon]]s are similar to [[titan]]s and [[forgotten beast]]s, in that they are procedurally generated, but unlike titans, they are not unique. Thus, many different types of demons will exist in the world, but there will be many members of each type. Setting this to zero means no demons will exist, limiting the amount of [[fun]] you can have. Thanks to [[Underworld spire|certain fun things]], fewer demon types also means fewer goblin civilizations[http://www.bay12forums.com/smf/index.php?PHPSESSID=7348f68f41a9659443c05b2acf534e6c&topic=112465.15].You need at least 2 demon types, or goblin civilizations won't exist.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 702: Line 683:
 
=== Number of Night Troll Types ===
 
=== Number of Night Troll Types ===
  
The number of different [[Night troll|night trolls]] that will exist in the world. These are also procedurally generated. Setting this to zero means that the world will have no night trolls.
+
The number of different [[night troll]]s, also procedurally generated, that will exist in the world. Setting this to zero means that the world will have no night trolls, custom or otherwise
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 716: Line 697:
  
 
=== Number of Bogeyman Types ===
 
=== Number of Bogeyman Types ===
 
+
The number of different [[bogeyman]] forms that will exist in the world. Bogeymen are procedurally generated, though their forms do not vary by much. Setting this to zero means that the world will have no bogeymen, custom or otherwise.
The number of different [[Bogeyman|bogeyman]] forms that will exist in the world. Bogeyman are procedurally generated, though their forms do not vary by much. Setting this to zero means that the world will have no bogeyman. Additionally setting this to zero will not allow custom bogeymen to appear in the world.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 727: Line 707:
 
| <tt><nowiki>[BOGEYMAN_NUMBER:<number>]</nowiki></tt>
 
| <tt><nowiki>[BOGEYMAN_NUMBER:<number>]</nowiki></tt>
 
| <tt><nowiki>[BOGEYMAN_NUMBER:27]</nowiki></tt>
 
| <tt><nowiki>[BOGEYMAN_NUMBER:27]</nowiki></tt>
 +
| 0 to 1000
 +
|}
 +
 +
=== Number of Nightmare Types ===
 +
The number of different [[nightmare]] forms that will exist in the world. Nightmares are procedurally generated. Setting this to zero means that the world will have no nightmares, custom or otherwise.
 +
 +
{| {{prettytable}}
 +
|- bgcolor="#dddddd"
 +
! Token
 +
! Example
 +
! Notes
 +
|-
 +
| <tt><nowiki>[NIGHTMARE_NUMBER:<number>]</nowiki></tt>
 +
| <tt><nowiki>[NIGHTMARE_NUMBER:27]</nowiki></tt>
 
| 0 to 1000
 
| 0 to 1000
 
|}
 
|}
Line 745: Line 739:
 
|}
 
|}
  
=== Number of Werebeast Curse Types ===
+
=== Werebeast Parameters ===
 +
 
 +
==== Number of Werebeast Curse Types====
  
The number of different types of [[Werebeast|werebeasts]] that can exist in the world. It is common for werebeasts, unlike vampires, to assume many different forms and variations, the most well known of these amount as different species of animal beasts. From lizards, to wolves, to maybe even bears. Setting this to zero means no werebeasts will exist, and will also remove a large amount of [[fun]] from the game.
+
The number of different types of [[werebeast]]s that can exist in the world. It is common for werebeasts, unlike vampires, to assume many different forms and variations, the most well-known of these amount to different species of animals, from lizards, to wolves, to even bears. Setting this to zero means no werebeasts will exist, and will also remove a large amount of [[fun]] from the game.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 758: Line 754:
 
| <tt><nowiki>[WEREBEAST_NUMBER:58]</nowiki></tt>
 
| <tt><nowiki>[WEREBEAST_NUMBER:58]</nowiki></tt>
 
| 0 to 1000
 
| 0 to 1000
 +
|}
 +
 +
==== Attack Population Requirement ====
 +
 +
Werebeasts will begin to attack your fort once at least this many dwarves inhabit it, regardless of whether any other attack criteria have been met. This number defaults to 50 which will often be reached in the second year of the fort.
 +
 +
==== Exported Wealth Requirement ====
 +
Werebeasts will begin to attack your fort once you have exported at least this many [[Currency|dwarfbucks]]-worth of goods, regardless of whether or not any other criteria have been met. This parameter defaults to 5000.
 +
 +
==== Created Wealth Requirement ====
 +
 +
Werebeasts will begin to attack your fort once the fort's total wealth has reached this many [[Currency|dwarfbucks]] in value. This happens regardless of whether any of the other criteria, such as population, have been met; therefore, even with 1 dwarf, a fort could be attacked if the fort were worth at least this value.
 +
 +
{| {{prettytable}}
 +
|- bgcolor="#dddddd"
 +
! Token
 +
! Example
 +
! Notes
 +
|-
 +
| <tt><nowiki>[WEREBEAST_ATTACK_TRIGGER:<population>:<exp wealth>:<created wealth>]</nowiki></tt>
 +
| <tt><nowiki>[WEREBEAST_ATTACK_TRIGGER:50:5000:50000]</nowiki></tt>
 +
| 0 = None (disabled). Only one requirement must be met for an attack.
 
|}
 
|}
  
 
=== Number of Secret Types ===
 
=== Number of Secret Types ===
  
The number of secrets that exist in the world. Currently, all secrets are secrets of life and death, and the ones holding these secrets are necromancers. Setting this to zero means that no [[necromancer]]s will appear.
+
The number of secrets that exist in the world. Currently, all secrets are secrets of life and death, and the ones holding these secrets are [[necromancer]]s, thus, setting this to zero means that no necromancers will appear.
 +
Non-necromancer towers can still appear (extremely rarely) with zero secrets, constructed by independent undead groups.
 +
The primary difference between having 1 or 1000 secrets is the chance of your world having any necromancer towers at all. With 1, this chance is low. With the default number, it's seemingly guaranteed.
 +
Even with 1 secret, if you have any necromancer towers at all, it is likely a great number will quickly appear in world generation (though this isn't guaranteed).
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 771: Line 792:
 
|-
 
|-
 
| <tt><nowiki>[SECRET_NUMBER:<number>]</nowiki></tt>
 
| <tt><nowiki>[SECRET_NUMBER:<number>]</nowiki></tt>
| <tt><nowiki>[SECRET_NUMBER:44]</nowiki></tt>
+
| <tt><nowiki>[SECRET_NUMBER:52]</nowiki></tt>
 
| 0 to 1000
 
| 0 to 1000
 
|}
 
|}
Line 792: Line 813:
 
=== Number of Disturbance Interaction Types ===
 
=== Number of Disturbance Interaction Types ===
  
The number of different [[Mummy|disturbed dead]] {{verify}} that can exist in the world. Setting this to zero, while being as pointless as is, (since you're never forced to enter a tomb anyway), will most likely prevent any toilet roll spooks from appearing, but it may or may not also prevent the existence of the pyramids which house them too.
+
The number of different [[Mummy|disturbed dead]] {{verify}} that can exist in the world. Setting this to zero, while being pointless as is, (since you're never forced to enter a tomb anyway), will most likely prevent any toilet roll spooks from appearing, but it may or may not also prevent the existence of the pyramids which house them too. Note that you will still have the manifold traps to contend with.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 805: Line 826:
 
|}
 
|}
  
=== Number of Evil Cloud Types ===
+
=== Number of Evil Cloud / Evil Rain Types ===
  
 
This number specifies [[Weather#Evil weather|the total amount of various face-melting, eye-boiling, and zombifyingly-fun]] clouds of pure evil may appear in your world. Setting this to zero means you no longer will ever have to deal with encroaching dust walls of doom in that world. I'd keep this value low...
 
This number specifies [[Weather#Evil weather|the total amount of various face-melting, eye-boiling, and zombifyingly-fun]] clouds of pure evil may appear in your world. Setting this to zero means you no longer will ever have to deal with encroaching dust walls of doom in that world. I'd keep this value low...
Line 820: Line 841:
 
|}
 
|}
  
=== Number of Evil Rain Types ===
+
The latter number states how many different types of green-ooze drenchers, disconcerting blood-showers, and sickly yellow slime-baths can occur in your world. Compared to evil clouds though, this one hardly is worth stressing out about, usually.... Setting this to zero means the only semi-solid to fully-liquid fluids to fall from the sky will be pure H2O.  
 
 
The lesser of a relatively large group of evils... evil rain. This number states how many different types of green-ooze drenchers, disconcerting blood-showers, and sickly yellow slime-baths can occur in your world. Compared to evil clouds though, this one hardly is worth stressing out about, usually.... Setting this to zero means the only semi-solid to fully liquid liquids to fall from the sky will be pure H2O.  
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 836: Line 855:
  
 
=== Generate Divine Materials ===
 
=== Generate Divine Materials ===
 
+
This turns the generation of [[Divine_metal|divine metals]] on or off. It does not influence the creation of [[vault]]s. Probably determines whenever or not using divination dice spawns weapons.
This turns the generation of [[Divine_metal|divine metals]] on or off. It does not influence the creation of vaults.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 847: Line 865:
 
| <tt><nowiki>[GENERATE_DIVINE_MATERIALS:<1 or 0>]</nowiki></tt>
 
| <tt><nowiki>[GENERATE_DIVINE_MATERIALS:<1 or 0>]</nowiki></tt>
 
| <tt><nowiki>[GENERATE_DIVINE_MATERIALS:1]</nowiki></tt>
 
| <tt><nowiki>[GENERATE_DIVINE_MATERIALS:1]</nowiki></tt>
 +
| 1/0 = Yes/No
 +
|}
 +
 +
=== Allow Divination, Experiments, and Necromancy types ===
 +
These allow or disallow [[die|divination]], demon or necromancer [[experiment]]s, and the more advanced [[necromancer]] abilities.
 +
 +
{| {{prettytable}}
 +
|- bgcolor="#dddddd"
 +
! Token
 +
! Example
 +
! Notes
 +
|-
 +
| <tt><nowiki>[ALLOW_DIVINATION:<1 or 0>]</nowiki></tt>
 +
| <tt><nowiki>[ALLOW_DIVINATION:1]</nowiki></tt>
 +
| 1/0 = Yes/No
 +
|-
 +
| <tt><nowiki>[ALLOW_DEMONIC_EXPERIMENTS:<1 or 0>]</nowiki></tt>
 +
| <tt><nowiki>[ALLOW_DEMONIC_EXPERIMENTS:1]</nowiki></tt>
 +
| 1/0 = Yes/No
 +
|-
 +
| <tt><nowiki>[ALLOW_NECROMANCER_EXPERIMENTS:<1 or 0>]</nowiki></tt>
 +
| <tt><nowiki>[ALLOW_NECROMANCER_EXPERIMENTS:1]</nowiki></tt>
 +
| 1/0 = Yes/No
 +
|-
 +
| <tt><nowiki>[ALLOW_NECROMANCER_LIEUTENANTS:<1 or 0>]</nowiki></tt>
 +
| <tt><nowiki>[ALLOW_NECROMANCER_LIEUTENANTS:1]</nowiki></tt>
 +
| 1/0 = Yes/No
 +
|-
 +
| <tt><nowiki>[ALLOW_NECROMANCER_GHOULS:<1 or 0>]</nowiki></tt>
 +
| <tt><nowiki>[ALLOW_NECROMANCER_GHOULS:1]</nowiki></tt>
 +
| 1/0 = Yes/No
 +
|-
 +
| <tt><nowiki>[ALLOW_NECROMANCER_SUMMONS:<1 or 0>]</nowiki></tt>
 +
| <tt><nowiki>[ALLOW_NECROMANCER_SUMMONS:1]</nowiki></tt>
 
| 1/0 = Yes/No
 
| 1/0 = Yes/No
 
|}
 
|}
Line 852: Line 904:
 
=== Desired Good/Evil Square Counts ===
 
=== Desired Good/Evil Square Counts ===
  
These values change the amount of [[Surroundings#Good|good or evil]] tiles on the map, depending on the size of the region they are being considered for. The counts are for all tiles in all subregions of a given size considered together, ''not'' counts for each subregion considered separately. (all tiles in the same subregion share the same [[Surroundings|surroundings]] values.)
+
These values change the amount of [[Surroundings#Good|good or evil]] tiles on the map, depending on the size of the region they are being considered for. The counts are for all tiles in all subregions of a given size considered together, ''not'' counts for each subregion considered separately (all tiles in the same subregion share the same [[surroundings]] values).
  
 
As used here, a "subregion" is a named world area.  Subregion names and locations for a generated world are viewable in legends mode under "Regions".  Subregions are classified by size the same way for all map sizes: 1-24 tiles is Small, 25-99 tiles is Medium, and 100+ tiles is Large.
 
As used here, a "subregion" is a named world area.  Subregion names and locations for a generated world are viewable in legends mode under "Regions".  Subregions are classified by size the same way for all map sizes: 1-24 tiles is Small, 25-99 tiles is Medium, and 100+ tiles is Large.
  
The counts used here will always be restricted to regions of the given size no matter how large the count. Also, the count is more of a goal than a minimum or maximum. As a result, you can end up with many more or many fewer than the requested number of squares in some situations.
+
The counts used here will always be restricted to regions of the given size, no matter how large the count. Also, the count is more of a goal than a minimum or maximum. As a result, you can end up with many more or many fewer than the requested number of squares in some situations. In particular, if you have something like a case where only 3 large regions exist in a world, and you request "1 evil square" in large regions, you will end up with one of the large regions being ''entirely evil''.  So any non-zero value in one of these settings essentially means "force at least one region of this size to be all good/evil."
  
In particular, if you have something like a case where only 3 large regions exists in a world, and you request "1 evil square" in large regions, you will end up with one of the large regions being ''entirely evil''.  So any non-zero value in one of these settings essentially means "force at least one region of this size to be all good/evil."
+
Note that the "evilness" of evil biomes is also impacted by savagery. Certain civilizations cannot exist in good and/or evil squares, so too many of one or the other may limit the size of certain types of civilizations - dwarves, for example, need non-aligned biomes.  Creating too many evil biomes seems to lead to the danger of many civilizations' early extinction.
 
 
Note that the "evilness" of evil biomes is also impacted by savagery.
 
 
 
Certain civilizations can not exist in good and/or evil squares, so too many of one or the other may limit the size of certain types of civilizations.  Dwarves, for example, need non-aligned biomes.  Creating too many evil biomes seems to lead to the danger of an early extinction of many civilizations.
 
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 888: Line 936:
 
These parameters often result in infinite world rejection problems. See [[World rejection]] for information on solving problems related to worlds always being rejected due to one or more of these parameters.
 
These parameters often result in infinite world rejection problems. See [[World rejection]] for information on solving problems related to worlds always being rejected due to one or more of these parameters.
  
0 means no minimum for rejection. Setting to 0 does not guarantee 0 squares of that biome.
+
0 means no minimum for rejection - setting it to 0 does not guarantee 0 squares of that biome.
  
 
==== Biome Type Requirement Table ====
 
==== Biome Type Requirement Table ====
Line 962: Line 1,010:
 
==== Minimum Initial Square Count ====
 
==== Minimum Initial Square Count ====
  
This is the minimum number of squares of the given biome that must exist before things like erosion take place.
+
'''Note:  The exclusive purpose of these parameters is to cause world rejection.'''
  
One thing to keep in mind is the maximum number of squares on a map of a given size. If the total number of squares on a map is lower than the sum of all square count parameters then you will get infinite world rejection.
+
This is the minimum number of squares of the given biome that must exist before things like erosion take place.  One thing to keep in mind is the maximum number of squares on a map of a given size - if the total number of squares on a map is lower than the sum of all square count parameters, then you will get infinite world rejection.
  
 
To determine the number of squares on a map, just multiply the dimensions. In practice these parameters will need to sum to lower than the maximum because some space is needed for "slack".
 
To determine the number of squares on a map, just multiply the dimensions. In practice these parameters will need to sum to lower than the maximum because some space is needed for "slack".
Line 973: Line 1,021:
 
! Number of Squares
 
! Number of Squares
 
|-
 
|-
| 17x17
+
| 17×17
 
| 289
 
| 289
 
|-
 
|-
| 33x33
+
| 33×33
 
| 1089
 
| 1089
 
|-
 
|-
| 65x65
+
| 65×65
 
| 4225
 
| 4225
 
|-
 
|-
| 129x129
+
| 129×129
 
| 16614
 
| 16614
 
|-
 
|-
| 257x257
+
| 257×257
 
| 66049
 
| 66049
 
|}
 
|}
Line 1,029: Line 1,077:
 
| <tt><nowiki>[REGION_COUNTS:HILLS:8256:13:12]</nowiki></tt>
 
| <tt><nowiki>[REGION_COUNTS:HILLS:8256:13:12]</nowiki></tt>
 
|}
 
|}
+
 
 
=== Erosion Cycle Count ===
 
=== Erosion Cycle Count ===
  
Tells the world-generator how long the world has to erode its tall peaks down to mountainsides during the 'running rivers...' stage of world creation. The higher this number, the less jagged the world will be, and the more wide the major rivers will be. If you use the maximum number, your mountains will dissolve before your eyes into plains which can lead to rejections if there aren't enough mountains to use for river start points and dwarven civilization origin points.  
+
Tells the world generator how long the world has to erode its tall peaks down to mountainsides during the 'running rivers...' stage of world creation. The higher this number, the less jagged the world will be, and the more wide the major rivers will be. If you use the maximum number, your mountains will dissolve before your eyes into plains which can lead to rejections if there aren't enough mountains to use for river start points and dwarven civilization origin points.  
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 1,081: Line 1,129:
 
=== Do Orographic Precipitation and Rain Shadows ===
 
=== Do Orographic Precipitation and Rain Shadows ===
  
Toggle that allows terrain height to affect rainfall. For example, moist air coming from the ocean blows over the land. As the terrain gets higher, it forces the moist air up, causing it to rain on the seaward side of a mountain. Eventually, all the rain has fallen if the mountain is tall enough. So, when the breeze goes over the top, there's no moisture left to fall on the other side, creating a rain-shadow. In the current version, regions where drainage is above 50 will also create rain shadows, regardless of the underlying biome and elevation.{{cite forum|140685/5484064}} The rain shadows will always be created as if the wind is blowing from west to east.
+
Toggle that allows terrain height to affect rainfall. For example, moist air coming from the ocean blows over the land. As the terrain gets higher, it forces the moist air up, causing it to rain on the seaward side of a mountain. Eventually, all the rain has fallen if the mountain is tall enough. So, when the breeze goes over the top, there's no moisture left to fall on the other side, creating a rain-shadow. In the current version, regions where drainage is above 50 will also create rain shadows, regardless of the underlying biome and elevation.{{cite forum|140685/5484064}}
  
 
Turning this on should create a tendency for more extreme rainfall in regions, creating more forests, deserts, marshlands, and grasslands. Also note that it can create rainfall outside of min-max rainfall settings, so even in a world with a 0 max rainfall you may get rainfall biomes. Turning it off should result in more controllable, less complex rainfall conditions based on rainfall parameters as it adds a random element which can distort or otherwise mess up the climates on a pregenerated map.
 
Turning this on should create a tendency for more extreme rainfall in regions, creating more forests, deserts, marshlands, and grasslands. Also note that it can create rainfall outside of min-max rainfall settings, so even in a world with a 0 max rainfall you may get rainfall biomes. Turning it off should result in more controllable, less complex rainfall conditions based on rainfall parameters as it adds a random element which can distort or otherwise mess up the climates on a pregenerated map.
Line 1,120: Line 1,168:
  
 
=== Cavern Parameters ===
 
=== Cavern Parameters ===
[[Caverns]] are the hollow areas underground which dwarves tend to encounter when they're digging around.
+
[[Caverns]] are the hollow areas underground, which dwarves tend to encounter when they're digging around. The '''Cavern Layer Number''' parameter determines how many cavern systems will be generated, not including the magma layer or the Bottom layer.  Defaults to three. Setting it to lower values could help FPS.
  
==== Cavern Layer Number ====
 
  
This parameter determines how many cavern systems will be generated, not including the Magma layer or the Bottom layer.  Defaults to three. Setting it to lower values could help FPS.
 
  
'''Warning:'''
+
Setting it to 2 will merge cavern 3 species into the 2nd cavern, and setting it to 1 will merge all into one cavern. However, disabling them entirely by setting it to 0 will make it impossible to grow any underground plants, as none will exist for your civilization to cultivate, nor will they be available on embark.
*Disabling caverns by setting this to 0 will make it impossible to grow any underground plants, as none will exist for your civilization to cultivate. (Underground plants will not be available on embark.)
+
 
 +
*Setting caverns to a sub-3 number (Spoiler, highlight to view) <span style='color:#f8f8f8;'>erases about one-third of HFS spires{{Bug|10267}} and prevents dig deep disasters.</span> Additionally, random plant or animal species can be more frequently absent.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 1,175: Line 1,222:
 
===== Layer Passage Density Min/Max =====
 
===== Layer Passage Density Min/Max =====
  
This determines how many passages form the cavern. If openness (see above) is set to minimum and density increased then you will get a maze like network of small criss-crossing passages. Raising the values further increases the number of the maze-like passages.
+
This determines how many passages form the cavern. If openness (see above) is set to minimum and density increased, then you will get a maze-like network of small criss-crossing passages. Raising the values further increases the number of the maze-like passages.
  
 
Caverns will be large, open spaces at 0, and comprised of many small vertical shafts of rock at 100. Setting both values to be the same results in a uniform look for the caverns.{{Verify}}
 
Caverns will be large, open spaces at 0, and comprised of many small vertical shafts of rock at 100. Setting both values to be the same results in a uniform look for the caverns.{{Verify}}
Line 1,192: Line 1,239:
 
| <tt><nowiki>[CAVERN_LAYER_PASSAGE_DENSITY_MAX:100]</nowiki></tt>
 
| <tt><nowiki>[CAVERN_LAYER_PASSAGE_DENSITY_MAX:100]</nowiki></tt>
 
|}
 
|}
 
See [http://www.bay12forums.com/smf/index.php?topic=76355.0 this forum thread] for more information on openness and density including many more images.
 
  
 
===== Layer Water min\max =====
 
===== Layer Water min\max =====
  
Determines how many caverns will have water at the bottom.  Note that, even at 100, there will be some amount of ground in caverns, but each cavern 'bubble' will contain some amount of water.
+
Determines how many caverns (out of a max. 3) will have water at the bottom.  Note that, even at 100, there will be some amount of ground in caverns, but each cavern 'bubble' will contain some amount of water.
  
 
At 0, there will be no water in your caverns.  This may impact future underground plant growth, although maps will still start with underground flora.{{Verify}}
 
At 0, there will be no water in your caverns.  This may impact future underground plant growth, although maps will still start with underground flora.{{Verify}}
Line 1,219: Line 1,264:
 
This parameter controls whether the [[magma sea]] exists.
 
This parameter controls whether the [[magma sea]] exists.
  
Setting 1/Yes causes the magma layer to exist, value 0/No prevents it. Appears not have impact on volcanoes, nor volcanism, so even if 0/No there will still be embark locations with magma. If a [[volcano]] exists, it appears to always tap the magma sea, but the magma sea will not be revealed by revealing the volcano.
+
Setting 1/Yes causes the magma layer to exist, value 0/No prevents it. Appears not to have any impact on volcanoes nor volcanism, so even if 0/No, there will still be embark locations with magma. If a [[volcano]] exists, it appears to always tap the magma sea, but the magma sea will not be revealed by revealing the volcano.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 1,249: Line 1,294:
 
These parameters control the "thickness" of various "layers" on the map. Note that a "layer" in this case does not refer to one Z-level, but refers to a number of related Z-levels such as "levels above ground".
 
These parameters control the "thickness" of various "layers" on the map. Note that a "layer" in this case does not refer to one Z-level, but refers to a number of related Z-levels such as "levels above ground".
  
The following table assumes that you have 3 cavern layers.  The Levels Above Layer settings control how many Z-Levels are above each layer.  A layer may itself consist of multiple Z-Levels (and almost always does).
+
The following table assumes that you have 3 cavern layers. (out of a minimum of 0-3) The Levels Above Layer settings control how many Z-Levels are above each layer.  A layer may itself consist of multiple Z-Levels (and almost always does).
  
 
{|style="margin:1em 1em 1em 0;background:#F9F9F9;border:1px #AAA solid;border-collapse:collapse;" class="wikitable"
 
{|style="margin:1em 1em 1em 0;background:#F9F9F9;border:1px #AAA solid;border-collapse:collapse;" class="wikitable"
Line 1,259: Line 1,304:
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Ground
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Ground
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_GROUND:<number>]</nowiki>
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_GROUND:<number>]</nowiki>
|style="border:1px #AAA solid;padding:0.2em;"| The number of Z-Levels of air above the highest surface level.<br />Has no impact on how many Z-levels deep the surface layer is.
+
|style="border:1px #AAA solid;padding:0.2em;"| The number of Z-levels of air above the highest surface level.<br />Has no impact on how many Z-levels deep the surface layer is.
 
|-
 
|-
 
|style="border:1px #AAA solid;padding:0.2em;"| Above layer 1
 
|style="border:1px #AAA solid;padding:0.2em;"| Above layer 1
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_1:<number>]</nowiki>
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_1:<number>]</nowiki>
|style="border:1px #AAA solid;padding:0.2em;"| Z-Levels of stone above the first cavern layer.  Making this higher will guarantee ''at least'' this many levels to build your fortress, but will have no impact on how many z-levels thick the surface layer is.  Also, the top of a cavern may be higher than the rest of a cavern, so in practice there will be more "solid" levels than this above the cavern.
+
|style="border:1px #AAA solid;padding:0.2em;"| Z-levels of stone above the first cavern layer.  Making this higher will guarantee ''at least'' this many levels to build your fortress, but will have no impact on how many z-levels thick the surface layer is.  Also, the top of a cavern may be higher than the rest of a cavern, so in practice there will be more "solid" levels than this above the cavern.
As for version 0.31.25 this setting is inaccurate. The actual number of z-levels may vary in a range of approx. ±5, which may result in non-existence of any solid z-levels between a surface layer and first cavern layer.
+
As of version 0.31.25 this setting is inaccurate. The actual number of z-levels may vary in a range of approx. ±5, which may result in non-existence of any solid z-levels between a surface layer and first cavern layer.
 
|-
 
|-
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 2
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 2
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_2:<number>]</nowiki>
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_2:<number>]</nowiki>
|style="border:1px #AAA solid;padding:0.2em;"| Z-levels of earth between very top of second cavern and very bottom of first cavern.
+
|style="border:1px #AAA solid;padding:0.2em;"| Z-levels of earth between the very top of the second cavern and the very bottom of the first cavern.
 
|-
 
|-
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 3
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 3
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_3:<number>]</nowiki>
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_3:<number>]</nowiki>
|style="border:1px #AAA solid;padding:0.2em;"| Z-levels of earth between very top of third cavern and very bottom of second cavern.
+
|style="border:1px #AAA solid;padding:0.2em;"| Z-levels of earth between the very top of the third cavern and the very bottom of the second cavern.
 
|-
 
|-
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 4
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 4
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_4:<number>]</nowiki>
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_ABOVE_LAYER_4:<number>]</nowiki>
|style="border:1px #AAA solid;padding:0.2em;"| Z-Levels of earth between very highest magma and very bottom of third cavern.<br />Spoiler Hidden (select invisible text to read): <span style='color:#eee;'>Making this high will give a large area for HFS veins, so that it never touches caverns, giving more to mine '''if''' it was impacting the cavern previously.</span>
+
|style="border:1px #AAA solid;padding:0.2em;"| Z-levels of earth between the very highest magma and the very bottom of the third cavern.<br />Spoiler Hidden (select invisible text to read): <span style='color:#eee;'>Making this high will give a large area for HFS veins, so that it never touches caverns, giving more to mine '''if''' it was impacting the cavern previously.</span>
 
|-
 
|-
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 5
 
|style="border:1px #AAA solid;padding:0.2em;"| Above Layer 5
Line 1,284: Line 1,329:
 
|style="border:1px #AAA solid;padding:0.2em;"| At Bottom
 
|style="border:1px #AAA solid;padding:0.2em;"| At Bottom
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_AT_BOTTOM:<number>]</nowiki>
 
|style="border:1px #AAA solid;padding:0.2em;"| <nowiki>[LEVELS_AT_BOTTOM:<number>]</nowiki>
|style="border:1px #AAA solid;padding:0.2em;"| Appears to be number of levels of HFS chamber.<br />Only valid if Bottom Layer present.<br />Often has no impact.<br />Values larger than default results in strange things.
+
|style="border:1px #AAA solid;padding:0.2em;"| Appears to be number of levels of HFS chamber. Only valid if Bottom Layer present, often having no impact. Values larger than default result in strange things.
 
|}
 
|}
  
 
Some implications:
 
Some implications:
* The number of surface layers (e.g. soil), at this time, can not be controlled.  For example, on a map with 1 layer of Peat, then a layer of Silt, then a layer of Obsidian, there is no control to let you increase either one to be, say, 20 z-levels. (though you may get lucky with the Obsidian).
+
* The number of surface layers (e.g. soil), at this time, cannot be controlled.  For example, on a map with 1 layer of peat, then a layer of silt, then a layer of obsidian, there is no control to let you increase either one to be, say, 20 z-levels. (though you may get lucky with the obsidian).
* There can be multiple stone layers between the cavern and the surface.  So increasing Levels Above Layer 1 may give you more Conglomerate, or more Granite, and you have no control over which stone layer spans those Z-Levels.
+
* There can be multiple stone layers between the cavern and the surface, so, increasing Levels Above Layer 1 may give you more conglomerate or more granite, and you have no control over which stone layer spans those Z-levels.
 
* The layers shown on embark span across the cavern layers in an unknown and inconsistent way.  Sometimes those 10 different layers of stone are evenly distributed over your 400 z-level deep map, sometimes the first 9 get 1 z-level each and the last gets the other 391 levels.  No way to control found yet.
 
* The layers shown on embark span across the cavern layers in an unknown and inconsistent way.  Sometimes those 10 different layers of stone are evenly distributed over your 400 z-level deep map, sometimes the first 9 get 1 z-level each and the last gets the other 391 levels.  No way to control found yet.
* The HFS temple, if present, will always extend into the rock layers, and appears to always make contact with the bottom cave.  Large values for levels above layer 5 and layer 4 can result in enormous temples, but the number of levels at the top (the part with undead) appears to be unaffected.
+
* The HFS chamber, if present, will always extend into the rock layers, and appears to always make contact with the bottom cave.  Large values for levels above layer 5 and layer 4 can result in enormous chambers, but the number of levels at the top (the part with undead) appears to be unaffected.
 
* Unconfirmed whether number of levels between caverns has any impact on cavern height.  There will be connecting ramps and/or shafts between cavern layers no matter how many levels are between them.
 
* Unconfirmed whether number of levels between caverns has any impact on cavern height.  There will be connecting ramps and/or shafts between cavern layers no matter how many levels are between them.
* '''Very Important''': These values appear to apply across a whole 16x16 Region, not just embark areas.  That means that if a 16x16 region is completely flat, but has one tall mountain in one far corner, even if you set Levels Above Ground low (e.g. 2 z-levels) you still have all the empty air of the highest mountain in every embark tile (e.g. 200 z-levels).  Also can happen to the semi-molten layer, and can lead to unexpected behavior.
+
* '''Very Important''': These values appear to apply across a whole 16x16 region, not just embark areas.  That means that if a 16x16 region is completely flat, but has one tall mountain in one far corner, even if you set Levels Above Ground low (e.g. 2 z-levels) you still have all the empty air of the highest mountain in every embark tile (e.g. 200 z-levels).  Also can happen to the semi-molten layer, and can lead to unexpected behavior.
* Very large values can cause strange things to happen.  Even more true for small values.
+
* Very large or small values can cause strange things to happen.
  
 
=== Cave Parameters ===
 
=== Cave Parameters ===
  
Caves are sort of like caverns except that they have a passage to the surface and are generally much smaller. Caves can connect to caverns if they are sufficiently deep.
+
Caves are somewhat like caverns, except that they have a passage to the surface, and are generally much smaller – caves can connect to caverns if they are sufficiently deep.
  
 
==== Minimum/Maximum Natural Cave Size ====
 
==== Minimum/Maximum Natural Cave Size ====
Line 1,318: Line 1,363:
 
|}
 
|}
  
==== Number of (Non-)Mountain Caves ====
+
==== Number of Non-Mountain Caves ====
  
The number of caves that will be generated. Lurking kobolds set up shop in caves and store stolen items here. A setting of 0 in both will stop kobold civilizations from appearing.  Special note: a cave is not a lair.   
+
The number of non-mountainous caves that will be generated. Lurking [[kobold]]s set up shop in caves, and store their stolen items there - a setting of 0 in both will stop kobold civilizations from appearing.  Special note: a cave is not a [[lair]].   
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 1,338: Line 1,383:
 
==== Make Caves Visible ====
 
==== Make Caves Visible ====
  
If set to no (default) then the location of caves will not be marked on the map. If set to yes, caves will appear on the map as {{Raw Tile|•|#808080|#00DD00}} symbols so that they may be sought out or avoided as desired.
+
If set to no (default) then the location of caves will not be marked on the map. If set to yes, caves will appear on the map so that they may be sought out or avoided as desired.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 1,353: Line 1,398:
 
=== Allow Init Options to Show Tunnels ===
 
=== Allow Init Options to Show Tunnels ===
  
This parameter doesn't do anything.
+
If enabled, you will be able to see the underground tunnels often built by dwarves on the world map, and they will appear as black lines, similar to roads.
  
 
{| {{prettytable}}
 
{| {{prettytable}}
Line 1,368: Line 1,413:
 
=== Number of Civilizations ===
 
=== Number of Civilizations ===
  
This number of civilizations will be placed on the map before history generation begins. These civilizations may later die out due to historical events. It is noteworthy that the chance for any given civilization to be destroyed through megabeasts, decreases with a higher total number of civilizations present[http://www.bay12forums.com/smf/index.php?PHPSESSID=7348f68f41a9659443c05b2acf534e6c&topic=112465.15 <sup>data</sup>]. The five races are dwarf, elf, human, goblin, and kobold; they will generally be placed in equal numbers until the quota has been reached. If there are not enough biomes or other worldgen prerequisites for an even distribution, certain civs will be much more will less frequent than others[http://www.bay12forums.com/smf/index.php?PHPSESSID=7348f68f41a9659443c05b2acf534e6c&topic=112465.15 <sup>data</sup>]. If there is an odd number of civs (not divisible by 5), then the remainder is distributed randomly. Kobold civs require caves to be placed; if no caves exist, then kobolds are skipped and will not appear. This does not cause rejections [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415125#msg3415125 <sup>data</sup>].
+
This number of [[civilization]]s will be placed on the map before history generation begins. These civilizations may later die out due to historical events. It is noteworthy that the chance for any given civilization to be destroyed through megabeasts decreases with a higher total number of civilizations present[http://www.bay12forums.com/smf/index.php?PHPSESSID=7348f68f41a9659443c05b2acf534e6c&topic=112465.15 <sup>data</sup>]. The five races are dwarf, elf, human, goblin, and kobold; they will generally be placed in equal numbers until the quota has been reached. If there are not enough biomes or other worldgen prerequisites for an even distribution, certain civs will be much more or less frequent than others[http://www.bay12forums.com/smf/index.php?PHPSESSID=7348f68f41a9659443c05b2acf534e6c&topic=112465.15 <sup>data</sup>]. If there is an odd number of civs (not divisible by 5), then the remainder is distributed randomly. Kobold civs require caves to be placed; if no caves exist, then kobolds are skipped and will not appear. This does not cause rejections [http://www.bay12forums.com/smf/index.php?topic=112465.msg3415125#msg3415125 <sup>data</sup>].
  
 
Note that a high value here can cause lots of map rejections, particularly on smaller maps as there simply isn't enough room or regions to put them all in.
 
Note that a high value here can cause lots of map rejections, particularly on smaller maps as there simply isn't enough room or regions to put them all in.
Line 1,402: Line 1,447:
 
=== Minimum Number of Mid/Low/High Characteristic Squares ===
 
=== Minimum Number of Mid/Low/High Characteristic Squares ===
  
Sets the minimum possible number of squares of certain ranges of each of the region qualities, such as elevation, rain, drainage, volcanism, savagery, and temperature. These need to be changed to reflect your regional meshes and weights. These are responsible for a HUGE number of map rejections. These values can all be set to 0 for much fewer map rejections, particularly in the case of more wacky, non-standard maps.  
+
Sets the minimum possible number of squares of certain ranges of each of the region qualities, such as elevation, rain, drainage, volcanism, savagery, and temperature. These need to be changed to reflect your regional meshes and weights, and are responsible for a HUGE number of map rejections. These values can all be set to 0 for much fewer map rejections, particularly in the case of more wacky, non-standard maps.  
  
 
These values will cause worlds to be rejected unless at least the given number of squares of the given type are randomly generated. Setting these values too high could result in worlds always being rejected if other parameters such as the maximum/minimums for elevation, etc., don't allow enough of those squares to get generated.
 
These values will cause worlds to be rejected unless at least the given number of squares of the given type are randomly generated. Setting these values too high could result in worlds always being rejected if other parameters such as the maximum/minimums for elevation, etc., don't allow enough of those squares to get generated.
Line 1,432: Line 1,477:
 
==World rejection==
 
==World rejection==
  
:''Main article [[World rejection]]''
+
:''Main article: [[World rejection]]''
  
If you are having the common problem of your generated worlds always being rejected by the world generator, see [[v0.31:World rejection|Solving World Rejection Problems (v0.31 page)]] as it contains many detailed suggestions on how to troubleshoot and solve these issues.
+
If you are having the common problem of generated worlds always being rejected by the world generator, see [[v0.31:World rejection|Solving World Rejection Problems (v0.31 page)]] as it contains many detailed suggestions on how to troubleshoot and solve these issues.
  
 
== Default Worldgen Parameters ==
 
== Default Worldgen Parameters ==
Line 1,442: Line 1,487:
 
== Parameter Set Examples ==
 
== Parameter Set Examples ==
  
If you're trying to do something specific then the [[Worldgen examples|Worldgen examples]] might be helpful. These are complete parameter sets that can be copied directly into your ''world_gen.txt'' file and customized as desired.
+
If you're trying to do something specific, then the [[Worldgen examples]] - complete parameter sets that can be copied directly into your ''world_gen.txt'' file and customized as desired - might be helpful.
If they have nothing for you try [[Worldgen Tricks|Worldgen Tricks]], for known tricks and tips on making a world just right for you.
+
If none of the examples suit your needs, [[Worldgen tricks]] has strategies and tips on making a world just right for you.
  
For many many more examples see:
+
For many, many more examples see:
 
* [http://www.bay12forums.com/smf/index.php?topic=101280 DF2012 (v0.34) WorldGen "Cookbook" Thread]
 
* [http://www.bay12forums.com/smf/index.php?topic=101280 DF2012 (v0.34) WorldGen "Cookbook" Thread]
 
* [http://www.bay12forums.com/smf/index.php?topic=140180 DF2014 (v0.40) WorldGen "Cookbook" Thread]
 
* [http://www.bay12forums.com/smf/index.php?topic=140180 DF2014 (v0.40) WorldGen "Cookbook" Thread]
 +
* [http://www.bay12forums.com/smf/index.php?topic=168543.0 DF2014 (v0.44.02+) WorldGen "Cookbook" Thread]
 +
* [http://www.bay12forums.com/smf/index.php?topic=175538 DF2014 (v0.47.01+) WorldGen "Cookbook" Thread]
 +
* [http://www.bay12forums.com/smf/index.php?topic=180805.0 DF2022 (v0.50.01+) WorldGen "Cookbook" Thread]
  
 
{{World}}
 
{{World}}

Latest revision as of 06:47, 30 June 2024

This article is about the current version of DF.
Note that some content may still need to be updated.

This article contains information on advanced world generation. For information on basic world generation, see World generation. See World token to more easily find information by the names used in the world_gen.txt file, World rejection for information on solving problems related to worlds always being rejected, and Worldgen examples for example worlds.
The advanced world generation screen.
(Click to enlarge)

Advanced world generation, also labeled as detailed mode, allows substantially more detail-oriented options of customization than standard, basic world generation. This gives the player much more control over how their world is generated. To better understand this article, it is advised that one should read about basic world generation first.

The advanced world generation screen is reached by clicking "Create new world" at the main menu, then clicking "Detailed mode". Once at that screen, clicking "Basic options" will return the user to the standard world generation screen.

Parameter sets[edit]

The list of already-defined parameter sets is in the upper-left. You can select the current set that you want to work with using the drop down menu. Any parameter set can be renamed by clicking the Quill.png.

Parameter sets can be made by clicking "New parameter set" or by clicking "Copy" to copy the selected set. This will append the selected set to the drop down menu and automatically select that set for editing.

Parameter sets are stored in the prefs/world_gen.txt file in the main DF directory. The "Save" and "Load" buttons in the upper-right of DF will save or load all of the parameter sets in this file. The world_gen.txt file can also be edited with a text editor. This is useful for parameter sets posted on the forum or wiki in text form. (See Parameter set examples below.)

The tokens used in world_gen.txt are at the bottom of each parameter description. Here's the one for the title.

Token Example Notes
[TITLE: <name>] [TITLE:MEDIUM ISLAND] Required

World name[edit]

As previously mentioned, the title of the parameter set doesn't affect the name of the world. You can specify a particular name for your world using n or set it back to the default random setting using N.

Token Example Notes
[CUSTOM_NAME: <name>] [CUSTOM_NAME:Realm of Cheese Engravings] For a random name, simply don't use this token.

World dimensions[edit]

The size of the map to be generated can be changed by changing the Width and Height values. Larger maps take longer to generate and may limit FPS in-game.

Changing the dimensions of the world will reset the parameters, because many of them have different defaults depending on the surface area available. Creating larger worlds does not necessarily mean longer world generation time - the essential factor for the gen duration is the history. If you restrict the number of historical events, you can significantly speed up the process.

Token Example Notes
[DIM:<width>:<height>] [DIM:129:129] Valid values are 17, 33, 65, 129, and 257. Others may not work. Non-square maps may result in crashesBug:2928.

Seed values[edit]

The world generation process uses a PRNG (Pseudo Random Number Generator) algorithm. A PRNG will produce a sequence of numbers that "looks" random, even though the actual sequence of numbers will always be the same if the PRNG is started with the same seed value. Basically this means that if you run world generation with a certain seed value on your computer, and someone else runs world generation with the same seed value on their computer, the same sequence of random numbers will be generated on both computers. The practical impact of this is that someone else can generate exactly the same world that you generated by entering the same seed value that you used.

In older versions, the same seed value(s) produced identical worlds on every computer at any time (if other parameters were identical, too). In the current version, the seed values for the world itself and the names seem to produce the same result, but you will get changes in events which will result in a very different world history. It seems like the history is partly random and not completely connected to the seed. Keep this in mind if you want to regenerate a particular world.

A specific seed value can be entered with s. This will change all of the seed values to the value you enter. If you need to enter different seed values for each type of seed, use e. In order to find out what seed values were used for the last world you generated, you can look at this screen. If you want to be able to tell someone else how to generate exactly the same world that you just generated, they will need all of the seed values listed under Last Param Set.

When generating a world using a seed, the way that the world is generated is also based at least in part on certain world tokens. As such, you cannot for example, change the minimum and maximum rainfall and get 'the same world but drier or wetter', instead, a different world is generated. That said, it would also seem that certain small changes to these world tokens can occasionally generate a very similar world, however, other tokens are more sensitive. For more information see the forum thread here.

The following are tokens which appear to be involved in the implementation of the seed, and are not safe to change:

  • [DIM:X:X]
  • [ELEVATION:X:X:X:X]
  • [RAINFALL:X:X:X:X]
  • [TEMPERATURE:X:X:X:X]
  • [DRAINAGE:X:X:X:X]
  • [VOLCANISM:X:X:X:X]
  • [SAVAGERY:X:X:X:X]
  • [ELEVATION_FREQUENCY:X:X:X:X:X:X]
  • [RAIN_FREQUENCY:X:X:X:X:X:X]
  • [DRAINAGE_FREQUENCY:X:X:X:X:X:X]
  • [TEMPERATURE_FREQUENCY:X:X:X:X:X:X]
  • [SAVAGERY_FREQUENCY:X:X:X:X:X:X]
  • [VOLCANISM_FREQUENCY:X:X:X:X:X:X]
  • [PARTIAL_OCEAN_EDGE_MIN:X]
  • [COMPLETE_OCEAN_EDGE_MIN:X]
  • [HAVE_BOTTOM_LAYER_1:X]
  • [MINERAL_SCARCITY:X] [1]

Many other world parameters, such as end year and embark points, can, however, be changed without it having any effect on the geography of the world generated from the seed values.

Normally, you don't enter these seed values - the world generation process comes up with seed values based on some sort of "true" random information from things like random values in uninitialized memory, the current date/time, etc.

Generating a world[edit]

Unless you're using an already-defined parameter set, you will probably want to edit the parameters. Information about each parameter is documented below. Once you are happy with the parameters you should save the values you just edited and proceed to the world generation process.

The phases of the world generation process are (this order is not completely correct):

  • Preparing elevation...
  • Setting temperature...
  • Running rivers...
  • Forming lakes and minerals...
  • Growing vegetation...
  • Verifying terrain...
  • Importing wildlife...
  • Recounting legends...
  • Placing civilizations...
  • Making cave civilizations...
  • Making cave pops...
  • Placing other beasts...
  • Placing megabeasts...
  • Placing good/evil...
  • Placing caves...
  • Prehistory generation
  • Finalizing civ mats...
  • Finalizing art...
  • Finalizing uniforms...
  • Finalizing sites...

World painter[edit]

Main article: World painter

The world painter tool allows you to paint features onto a map that is then used when generating a world. It is very difficult to use properly, and tends to result in endless rejected worlds, unless you loosen or remove the restrictions placed on biomes and civilizations in the advanced settings. That being said it is also a very powerful tool, and allows you to generate worlds more to your liking.

To access the world painter, hit e to start editing the advanced parameters and finally hit p to open world painter. How to use the world painter is not entirely obvious so please check out the World painter documentation to avoid frustration. (Losing may be fun, but frustration is not.)

Editing the parameters init file[edit]

Parameter sets are stored in the prefs/world_gen.txt file, using world tokens. You can copy and paste other players' sets of parameters into your world_gen.txt to use their parameter sets. Another place to find parameter sets is the Worldgen cookbook thread on the official forums.

Advanced parameters[edit]

To access advanced parameters, press e when at the "Design New Worlds with Advanced Parameters" screen. This will bring you to an editable list of various guidelines that the world-gen process will use when creating your new world. The parameters are described below in the order that they appear in the list in the UI, not necessarily the order they appear in the configuration file.

See world token for an index that will help you look things up by token name.

There are essentially 4 types of controls for the generation of the surface map;

Terrain Parameters: as described below, these 5 variables define the basic background world, how hot or cold it is, how much rainfall, how high the mountains are. The world automatically goes through the temperature range along the Y axis, although sometimes it will be hotter in the north, other times in the south. Minimum, maximum and X,Y variance can drastically alter the world.

Weighted Meshes: these are a way to fine-tune the amount of the 5 basic variables on the map. It can be used to set the specific distribution of different elevations or rainfall areas for example.

Rejection Parameters: Dwarf Fortress has a 'belt-and-braces' approach to world generation. The above controls allow you to shape the world, then the rejection parameters throw it out if it isn't right! There are a number of rejection parameters for the number and degree of the 5 basic variables, for biome types etc. If the world does not meet the requirements of any one rejection parameter the world is rejected and re-randomised. Also see World Rejection

There are also the feature-placing options such as rivers, mountain peaks, volcanoes and oceans, which can cause rejections if the terrain parameters don't allow enough suitable locations for the features to be placed.

If you are experimenting with world design, one method would be to disable the rejection parameters and use the first two control types. Otherwise, any significant change will likely result in endless rejections.


Seed values[edit]

Here, you can enter specific seed values for different parts of the world generation process - different sequences of pseudorandom numbers are used for different parts, so you can use this to reproduce only the particular part of world generation from some previously generated world, if you want. Normally, you'll want to leave all of these set to Random, unless you're specifically trying to reproduce the results of another world generation run.


Token Example Notes
[SEED:<number>] [SEED:31337]

For each of these not in the config file, a random seed will be used.

[HISTORY_SEED:<number>] [HISTORY_SEED:31337]
[NAME_SEED:<number>] [NAME_SEED:31337]
[CREATURE_SEED:<number>] [CREATURE_SEED:31337]

Embark Points[edit]

This controls the number of points that you have for skills and equipment when you embark in fortress mode. Turning this value up will allow games started in this world to start with more skilled dwarves with better equipment. Normally, you can do just fine by leaving this value set to default, but you might want to turn it up for experimental/testing purposes or to help dwarves survive in a particularly evil world, or turn it down for certain challenges. The highest amount this value can be set to is 10,000.

Token Example Notes
[EMBARK_POINTS:<number>] [EMBARK_POINTS:1504] Required

End year[edit]

This is how many years of history are generated for the world; basically the same as the History parameter in basic world gen, except that you can enter an exact value for the number of years. See History for more info.

History is divided into "ages" which are determined by the percentage of megabeasts and semi-megabeasts killed at various points. One can attempt to make a world go through the ages more quickly by pumping up the ratio of semimegabeast to megabeast caves, the former of which are usually more killable than the regular megabeasts. This will net you more "Age of Legends", "Age of Heroes", etc.

For more information on the history aspect of the game, see Legends and Ages.

Token Example Notes
[END_YEAR:<number>] [END_YEAR:1050] Required

Population cap after civ creation[edit]

This determines the maximum possible population of civilization member historical figures alive at a given time during worldgen. Not all members of a civilization are historical figures. This tag does not directly influence the total population of civilized beings as it once did when populations were all historical figures, so the description is a bit confusing. You can enter -1 to make the historical population unlimited.

Each race may have up to 100 civilizations each, and each civilization a maximum population of 10,000. Civilizations, known as entities in the raw files, have 3 or 4 basic variables that will greatly affect their final placement on the world map. See Population (Entity Token) for more information on interpreting/editing the raws if you need more precise control of civilization placement and total population numbers.

Huge historical figure populations can cause the size of history data to explode, cause history generation to take forever, lower FPS, and generally slow down the game.

Token Example Notes
[TOTAL_CIV_POPULATION:<number>] [TOTAL_CIV_POPULATION:15000] Required

Site cap after civ creation[edit]

This controls the maximum number of towns and similar sites on the entire map. Raising the number will allow for more towns, etc. though the number of sites will ultimately still be limited by things like space, terrain, and population cap. Note that this parameter controls only "civilization" sites like towns - other sites, such as lairs, will be added onto this maximum.

After civilizations reach this cap, they will not spread out any more to place new cities. By default, the raws limit each civilization site to a population of 120, regardless of the race of the civilization - therefore, without editing the raws, the total population on the map can't go above site cap x 120.

Beware; increasing this too high can slow worldgen down by a lot. Another effect can be goblins (or certain other civs) sometimes overwhelming all other civilizations and/or flooding the world with their homes, leaving no good places to build your fortress, be it human or dwarven. If you choose a low cap to hasten world generation, the cap will likely be reached within years, stopping expansion of all civs. If you want a good, long history, you will have to adjust site/population cap and the number of civs many times to find one fulfilling your needs.

Token Example Notes
[SITE_CAP:<number>] [SITE_CAP:1040] Required

Beast control[edit]

These parameters don't usually matter too much, but may matter for small numbers of beasts.

Percentage of Megabeasts and Titans Dead for Stoppage[edit]

The world starts out with a certain number of powerful megabeast and titan entities in existence. If a percentage of the megabeast and titan population dies out during history generation, then history generation will stop early. For example, if the elimination value is 80%, and the generated history starts with 200 entities and 160 of those 200 entities are eliminated by historical events before the End Year is reached, history generation will stop immediately.

If you want to end the creation of your world at the beginning of a certain age, choose the following values:

  • Age of Legends: ~34%
  • Age of Heroes: ~67%

If there are three or fewer titans or megabeasts in your world, the age will be given a special name reflecting the remaining megabeasts/titans, instead.

Year to Begin Checking Megabeast Percentage[edit]

The percentage of dead megabeasts and titans for stoppage will not be checked until this year is reached in history generation. This can be used to ensure that a world reaches a certain year even if all of the megabeasts in the world are slain earlier.

If the number of living megabeasts and titans starts at or drops to less than four, then world generation will always stop if the current year is equal to or greater than the Year to Begin Checking Megabeast Percentage regardless of how many megabeasts and titans are dead — Percentage of Megabeasts and Titans Dead for Stoppage is ignored. The number of megabeasts and titans at the start of the world is set by the sum of the Max Megabeasts Caves and Titan Number parameters.

Token Example Notes
[BEAST_END_YEAR:<year>:<percentage or -1>] [BEAST_END_YEAR:200:80] Use -1 as percentage to disable. Year must still be at least 2.

Cull Unimportant Historical Figures[edit]

Whether or not the game will ignore unimportant figures in history generation. The culling of unimportant historical figures is a CPU-intensive step in history generation but it saves memory and will speed up loading/saving games in fortress mode. This does mean that the "unimportant" figures will not appear in Legends mode or in engravings, but unimportant figures would likely not appear in engravings anyway.

Unimportant figures are creatures who suffer early deaths, never have offspring or kill a named creature during world gen. For example, a resident of a goblin tower may get murdered by demons at a young age. After culling unimportant figures, Legends mode would say "In the year 102, the demon Evil McEvilface killed an unknown creature at Eviltower."

Token Example Notes
[CULL_HISTORICAL_FIGURES:<0 or 1>] [CULL_HISTORICAL_FIGURES:0] 0 = No, 1 = Yes

Reveal All Historical Events[edit]

Setting this to Yes will allow access to most information about the history of the world in Legends mode. All events will be revealed, but some historical figures, sites, regions, and civilizations and other entities may not be, possibly because they are not known to any civilization. If set to No, then you will have to discover historical information in adventure mode or by instructing dwarves to make engravings.[Verify]

Token Example Notes
[REVEAL_ALL_HISTORY:<0 or 1>] [REVEAL_ALL_HISTORY::1] 0 = No, 1 = Yes

Terrain Parameters[edit]

These determine how random values for terrain elevation, rainfall, temperature, drainage, volcanism, and savagery are generated. What biomes exist are then determined by how these factors overlap with each other.

Minima and Maxima[edit]

These are the absolute minimum and maximum values that can ever be generated for a particular map square characteristic. Changing these can cause the occurrence of certain biomes to become impossible, so modify these with care. Because of this problem, you may want to use Weighted Ranges instead. By subtly tweaking the min and max values, vastly different maps can be made.

Elevation[edit]

This controls the range of terrain elevations that can occur in the world.

Usually you just want to leave the min/max values alone. Raising the minimum elevation can, for example, make it impossible for oceans to exist. This does not directly control the number of available Z-levels at a particular site, though high maximum values may contribute to peaks which can raise the number of above ground Z-levels. In other words, a maximum elevation of 400 and minimum of 1 does not mean you get 400 Z-levels but it might increase the number of Z-levels somewhat in some regions compared to others.

Raising the variance will result in a more bumpy, uneven landscape.

Some biomes/features that are impacted by elevation:

  • A high minimum (above 99) means no oceans as they need elevations below 100.
  • A low maximum (below 300) means no mountains as mountains need elevations above 300.
  • Rivers will be placed when the elevation maximum is 104 or higher. Therefore, keeping both values above 100 and below 104 will prevent all water tiles from appearing.
  • Mountain peaks can only form at elevations of 400.

X and Y Variance[edit]

These control how wildly things like elevation and rainfall can vary between adjacent map squares. For example, if these values are set to the maximum of 3,200 for elevation then you will end up with more very low areas right next to very high areas. The number for X determines the east-west variance and the number for Y determines the north-south variance. By setting only one of these to a high value you can, for example, create horizontal or vertical bands of areas which are more similar to each other.

Generally speaking, raising both of these values will create a more random "patchwork" of many small biomes while setting both x and y values to 0 will cause every square on the map to use a single random value for the given characteristic.

For "patchwork" worlds to avoid being rejected, Maximum Number of Subregions will probably need to be increased from the default.

Rainfall[edit]

Controls the amount of rainfall in each map square/area. Setting the minimum or maximum too high or low can make the formation of certain biomes impossible. Rainfall causes it to rain more in a given area, which can have various effects. Also makes more rivers appear on the world map.

Note that if orographic precipitation and rain shadows is on, then mountains will cause additional variance in rainfall, so (for example) rainfall below the specified minimum can occur in the shadow of a mountain. If you want the minimum and maximum for this parameter to be absolutely respected, you must turn off the orographic precipitation option.

Additionally, with 'Orthographic Precipitation' turned on, orthographic precipitation and rain shadows will only occur in regions with greater than or equal to 50 drainage. [Report, reproduced 2022]

Temperature[edit]

These parameters control how hot or cold various areas will be. If you lower the minimum and maximum values, the world will be colder overall, for example. As with the others, changing these values too much could make it impossible for certain biomes to exist. See Climate for more info.

These parameters form the "base" temperature for an area, and describe peak summer temperature in a scale that isn't used elsewhere in the game. This number also does not correspond 1:1 with the final climate. Temperature is always influenced by a number of variables, including elevation, time of year, thick forestation, and if Poles are enabled, latitude. These other variables are factored in after the temperature mesh is applied, and frequently bring temperatures above and below their set minimum and maximum values. The inclusion of Poles is particularly strong in this regard, as it allows latitude to raise and/or lower temperatures by more than 75 degrees Celsius! That said, the temperatures aren't raised or lowered by more than about 65 degrees past the set minimum and maximum. Furthermore, for typical ranges, the temperature will never be raised more than about 25 degrees past the maximum (but will still drop up to about 65 degrees Celsius below the minimum). (unsure about exact values, research needed)

Elves can spawn where the temperature is 10 degrees or warmer. Humans can spawn where the temperature is 0 degrees or warmer.

Drainage[edit]

Changing drainage parameters will change the way water-affected biomes are formed. Low drainage will contribute to the formation of lakes, rivers, and swamps. High drainage will cause water to sink into the ground rather than sit on the surface, which is important for forming hills.

Lower drainage values have been reported to contribute to the formation of thicker soil layers, though it is currently unknown exactly how other factors (such as elevation or perhaps rain) impact soil formation.

Volcanism[edit]

Volcanism controls the occurrence of igneous layers, and the formation of volcanoes. For a volcano to form, a square must have a volcanism value of 100, so reducing the maximum from 100 will make volcanoes impossible. Raising the minimum will increase the rarity of non-igneous layers.

Setting the minimum to a high value is not a good way to produce multiple volcanoes, as you are likely to get a "Volcanism not evenly distributed" rejection. Instead, use the Minimum Number of Volcanoes parameter, and possibly adjust the weighted ranges for volcanism as described below.

Savagery[edit]

These parameters control the level of savagery on the map. Raising the minimum savagery too high may make it impossible for certain races to exist, and similarly lowering the maximum too far can make it impossible for certain creatures to exist. The largest chance of having unusable maps comes from a too-high savagery value.

Configuration Tokens[edit]

Token Example Notes
[ELEVATION:<min>:<max>:<x variance>:<y variance>] [ELEVATION:1:400:401:401] Range: 0 to 400
Maximum of 400 required for mountain peaks.
Variance range: 0-3200
[RAINFALL:<min>:<max>:<x variance>:<y variance>] [RAINFALL:0:100:200:200] Range: 0 to 100
Variance range: 0-3200
[TEMPERATURE:<min>:<max>:<x variance>:<y variance>] [TEMPERATURE:25:75:200:200] Range: -1000 to 1000
Variance range: 0-3200
[DRAINAGE:<min>:<max>:<x variance>:<y variance>] [DRAINAGE:0:100:200:200] Range: 0 to 100
Variance range: 0-3200
[VOLCANISM:<min>:<max>:<x variance>:<y variance>] [VOLCANISM:1:100:200:200] Range: 0 to 100
Maximum of 100 required for volcanoes.
Variance range: 0-3200
[SAVAGERY:<min>:<max>:<x variance>:<y variance>] [SAVAGERY:1:100:200:200] Range: 0 to 100
Variance range: 0-3200

Terrain Mesh Sizes and Weights[edit]

These parameters make it possible to influence the number of squares in a particular range, without making conditions outside of that range impossible. For example, you can make it possible for many more low-elevation squares to exist without making it impossible for high elevations to form. Changing these parameters is often preferable to simply changing the min/max values.

The basic steps of applying weighted ranges are as follows:

  1. Create a grid with 2MeshSize - 1 tiles in both X and Y direction.
  2. At each grid intersection, set the value according to the weighted ranges.
  3. Smooth out the area between the intersection points.
  4. Add noise according to the variance parameters.

where MeshSize is the raw parameter value found in the world_gen.txt. See the image on the right for an example.

A large world generated with an Elevation Mesh Size of 32×32 and range weights set to 1:0:0:0:1 (i.e., only extreme high and low elevations). Note how the grid intersections are either set very high or very low and the space between them is smoothed out.

Mesh Size/Weighted Ranges[edit]

Mesh size determines how many grid tiles there will be. Setting this to Ignore will cause the weighted range settings to be ignored for that terrain characteristic. As an example, setting it to 2×2 means the grid will be 2 times 2 tiles large and there will be 3×3 for a total of 9 intersection points. On a pocket world, this means one grid tile will be 8×8 world tiles large, whereas on a large world, one grid tile will be 128×128 world tiles. Note that the highest possible value for a given world size will always make the grid tiles 8×8 world tiles large.


If mesh size is set to something other than Ignore, these weights will be applied at the granularity of the selected mesh size for purposes of generating random values in each range. This allows random number generation to be non-linear for the given terrain characteristic.

For example, if the Elevation Weighted Range parameters were set to (starting with the 0-20 range) 60:10:10:10:10 (these values do not have to add up to any particular number) and elevation min and max are set to 1 and 400 respectively then about 60% of the grid line intersection points (on average) will be set to an elevation in the range of 1-80 (0% to 20%), and the other ranges will be represented by around 10% of the intersection points each. The exact distribution is still left up to chance though on average it will be close to this specification.

Weighted ranges do not make rejection checks, although they can be responsible for many rejections if you neglect to adjust or disable some of the Minimum Number of Mid/Low/High Characteristic Squares for example.

Interaction between Mesh Size and Variance[edit]

The end result can vary greatly depending on how the corresponding X and Y Variance parameters are set. First of all, if the variance is too large the noise it adds can completely negate the effect of the weighted ranges. For instance, with a 2×2 mesh, the default variance parameters are high enough that usually the mesh grid can hardly be recognized. How strong the variance's effect is, is also dependent on the mesh size. Having a larger mesh size (i.e. smaller grid tiles) means the variance also has to be higher for a visible effect. For instance, with a variance of 400, the effects are clearly visible with a 2×2 mesh and barely visible at all with a 8×8 mesh. Note that this effect is directly dependent on the mesh size and not, as one might expect, on the actual size of the grid tiles. This means, that a large world with a 2×2 mesh will look essentially the same as a pocket world with a 2×2 mesh, only stretched to 256 times the size.

Also see this forum post for more details.

Configuration Tokens[edit]

Token Example Notes
[ELEVATION_FREQUENCY:<mesh>:<0-20 weight>:<20-40 weight>:<40-60 weight>:<60-80 weight>:<80-100 weight>] [ELEVATION_FREQUENCY:2:1:2:3:4:5] Valid mesh values:

1 = Ignore

2 = 2x2

3 = 4x4

4 = 8x8

5 = 16x16

6 = 32x32

(limited by world size)

[RAIN_FREQUENCY:<mesh>:<0-20 weight>:<20-40 weight>:<40-60 weight>:<60-80 weight>:<80-100 weight>] [RAIN_FREQUENCY:3:1:2:3:4:5]
[DRAINAGE_FREQUENCY:<mesh>:<0-20 weight>:<20-40 weight>:<40-60 weight>:<60-80 weight>:<80-100 weight>] [DRAINAGE_FREQUENCY:4:1:2:3:4:5]
[TEMPERATURE_FREQUENCY:<mesh>:<0-20 weight>:<20-40 weight>:<40-60 weight>:<60-80 weight>:<80-100 weight>] [TEMPERATURE_FREQUENCY:1:1:1:1:1:1]
[SAVAGERY_FREQUENCY:<mesh>:<0-20 weight>:<20-40 weight>:<40-60 weight>:<60-80 weight>:<80-100 weight>] [SAVAGERY_FREQUENCY:5:1:2:3:4:5]
[VOLCANISM_FREQUENCY:<mesh>:<0-20 weight>:<20-40 weight>:<40-60 weight>:<60-80 weight>:<80-100 weight>] [VOLCANISM_FREQUENCY:1:1:1:1:1:1]

Poles[edit]

With this, you can influence how polar regions are added. The poles can be on the north or south edge, and the equator will be on the opposite edge, or in the middle if there are two poles. If poles are set to NONE, then there will be no seasonal changes in the weather (e.g. no winter snow in temperate biomes).

Token Example Notes
[POLE:<placement>] [POLE:NORTH] Viable options: NONE, NORTH_OR_SOUTH, NORTH_AND_OR_SOUTH, NORTH, SOUTH, NORTH_AND_SOUTH

Minimum Mountain Peak Number[edit]

This will cause the world to be rejected if fewer than this many peaks (based on elevation) are present on the map. EG: elevations of 400 must be possible for mountain peaks to occur. If set to zero, then worlds will not be rejected based on number of peaks.

You may need to adjust elevation parameters, such as the highest weighted range, in order to get the desired number of elevation-400 squares needed for larger numbers of peaks. Like volcanoes, mountain peaks can make embark zones more interesting, but other than that, they don't appear to "do" anything special. Reportedly, they do increase the highest Z-level above ground in all embark zones in the same region, even if the selected embark zone does not include the peak.

Token Example Notes
[PEAK_NUMBER_MIN:<number>] [PEAK_NUMBER_MIN:20] Elevations of 400 must occur for peaks to form.

Minimum Partial Edge Oceans[edit]

This will cause a world to be rejected unless there are at least this many oceans touching an edge of the map. If set to zero then worlds will not be rejected based on this criterion. Setting both this parameter and Minimum Complete Edge Oceans to values that total more than 4 when added together may cause all worlds to be rejected as you can't have both a partial and complete edge ocean on a given edge.

Token Example Notes
[PARTIAL_OCEAN_EDGE_MIN:<number>] [PARTIAL_OCEAN_EDGE_MIN:2] Maximum of 4

Minimum Complete Edge Oceans[edit]

This will cause a world to be rejected unless there are at least this many oceans which completely cover an edge of the map. Since a square map only has 4 edges, the maximum value possible is 4. If set to zero then worlds will not be rejected based on this criterion but still might end up with complete edge oceans by chance.

Note that the ability for this many edge oceans to exist will be limited by elevation. Therefore, to actually create large oceans you will probably need to change things like the Elevation Mesh Size and Weighted Ranges to increase the number and distribution of very low elevation squares on the map. In addition, if Complete Edge Oceans is set to any value other than 0 or 4, you may need to lower elevation variance for at least one of the axes: if set too high, such as a variation of 1600 for both X and Y axes (the default for Large Island and Medium Island parameter sets), the game may generate worlds very slowly or even hang.Bug:565

Given appropriate weight, range, and variance values for things like elevation, a setting of: 1 results in a world that seems like a chunk of coastline. One edge of the map will be completely underwater and there will be ocean taking up much of the map on that side (think the east or west coast of the United States, the north coast of Canada, or southern Europe). If your edge ocean happens to pick your world's frozen side, most of it will be glacier.

  • 2 results in another coastline along with the first one -- the map could end up looking something like Panama if the oceans pick opposite sides of the map.
  • 3 results in a peninsula, like Florida in the US. There will be oceans surrounding 3 sides of the map, and land touching only one side of the map.
  • 4 results in one or more island(s) depending on things like elevation variance and weights. Regardless of whether you get one island or multiple islands, the entire map will be surrounded by water.

Unfortunately, there's no easy way to control which oceans end up on which edges, except perhaps setting X and Y variance to different values.

Edge oceans will take up part of the other edges too. For example, a full edge ocean on the east side will have part of the north and south sides underwater, but that does not add to the partial edge oceans count.

Token Example Notes
[COMPLETE_OCEAN_EDGE_MIN:<number>] [COMPLETE_OCEAN_EDGE_MIN:0] Maximum of 4

Minimum Volcano Number[edit]

Worlds with less than this number of volcanoes will be rejected. Note that this will not just create this many volcanoes at random; there must be at least this many squares with a Volcanism of 100. Therefore, adjusting Weighted Range for 80-100 to some higher value is recommended if you want to facilitate a large number of volcanoes. In addition, Maximum Volcanism must be set to 100 or squares with volcanism of 100 will be impossible, making volcanoes impossible.

Token Example Notes
[VOLCANO_MIN:<number>] [VOLCANO_MIN:15] Volcanoes require a volcanism of 100 to occur.

Mineral Scarcity[edit]

Controls the frequency at which minerals occur - setting this value lower will increase the amount and number of different types of ore present on a map, and the number/types of gems. The default value will result in a maximum of 2-4 metal ores per map (assuming you choose a good embark location) which may be limiting until the economy is fully implemented and desired metals can be traded for.

The options "Very Rare", "Rare", "Sparse", "Frequent", and "Everywhere" in the basic world generation menu use the values 50000, 10000, 2500, 500 and 100 respectively.

According to research by Shandra in v0.31.25, this is the relationship between the value of this setting and the approximate number of gems and ore:

MineralSetting v25 limit10k.png

This is for the same 8x8 embark region in a world which is otherwise the same, except for the mineral scarcity parameter (although most of the detailed information comes from experiments with previous versions).

Token Example Notes
[MINERAL_SCARCITY:<number>] [MINERAL_SCARCITY:2500] Range: 100 to 100,000

Note: as of v0.34, low mineral scarcity settings do not cause rejections.

Max Megabeast Caves[edit]

This is the number of megabeasts placed at the beginning of history. Megabeasts are hydras, bronze colossuses, rocs, and dragons, which are all placed in equal proportions data.

Increasing this value can lead to early extinction of civilizations.

Token Example Notes
[MEGABEAST_CAP:<number>] [MEGABEAST_CAP:75] Megabeasts count towards BEAST_END_YEAR calculation.

Max Semi-Megabeast Caves[edit]

This is the number of semi-megabeasts placed at the beginning of history. Semimegabeasts are giants, ettins, minotaurs, and cyclops, which are placed in equal proportions data.

Token Example Notes
[SEMIMEGABEAST_CAP:<number>] [SEMIMEGABEAST_CAP:150] Semimegabeasts do not count towards the BEAST_END_YEAR calculation.

Titan Parameters[edit]

Number[edit]

This controls the number of titans that exist at the beginning of historydata. The number of forgotten beasts is unaffected by this parameter data.

Token Example Notes
[TITAN_NUMBER:<number>] [TITAN_NUMBER:33] Titans count towards BEAST_END_YEAR calculation.

Attack Population Requirement[edit]

Titans will begin to attack your fort once at least this many dwarves inhabit it, regardless of whether any other attack criteria have been met.

This number defaults to 80, which isn't usually too difficult to deal with.

Exported Wealth Requirement[edit]

Titans will begin to attack your fort once you have exported at least this many dwarfbucks-worth of goods, regardless of whether or not any other criteria have been met. This parameter defaults to None (disabled).

Created Wealth Requirement[edit]

Titans will begin to attack your fort once the fort's total wealth has reached this many dwarfbucks in value. This happens regardless of whether any of the other criteria, such as population, have been met; therefore, even with 1 dwarf, a fort could be attacked if the fort were worth at least this value.

Token Example Notes
[TITAN_ATTACK_TRIGGER:<population>:<exp wealth>:<created wealth>] [TITAN_ATTACK_TRIGGER:80:0:100000] 0 = None (disabled). Only one requirement must be met for an attack.

Number of Demon Types[edit]

Demons are similar to titans and forgotten beasts, in that they are procedurally generated, but unlike titans, they are not unique. Thus, many different types of demons will exist in the world, but there will be many members of each type. Setting this to zero means no demons will exist, limiting the amount of fun you can have. Thanks to certain fun things, fewer demon types also means fewer goblin civilizations[1].You need at least 2 demon types, or goblin civilizations won't exist.

Token Example Notes
[DEMON_NUMBER:<number>] [DEMON_NUMBER:52] 0 to 1000

Number of Night Troll Types[edit]

The number of different night trolls, also procedurally generated, that will exist in the world. Setting this to zero means that the world will have no night trolls, custom or otherwise

Token Example Notes
[NIGHT_TROLL_NUMBER:<number>] [NIGHT_TROLL_NUMBER:77] 0 to 1000

Number of Bogeyman Types[edit]

The number of different bogeyman forms that will exist in the world. Bogeymen are procedurally generated, though their forms do not vary by much. Setting this to zero means that the world will have no bogeymen, custom or otherwise.

Token Example Notes
[BOGEYMAN_NUMBER:<number>] [BOGEYMAN_NUMBER:27] 0 to 1000

Number of Nightmare Types[edit]

The number of different nightmare forms that will exist in the world. Nightmares are procedurally generated. Setting this to zero means that the world will have no nightmares, custom or otherwise.

Token Example Notes
[NIGHTMARE_NUMBER:<number>] [NIGHTMARE_NUMBER:27] 0 to 1000

Number of Vampire Curse Types[edit]

The number of different types of vampires that will exist in the world. Although they are generated at the start of a new world, they aren't different from each other. Setting this to zero means no vampires will exist.

Token Example Notes
[VAMPIRE_NUMBER:<number>] [VAMPIRE_NUMBER:72] 0 to 1000

Werebeast Parameters[edit]

Number of Werebeast Curse Types[edit]

The number of different types of werebeasts that can exist in the world. It is common for werebeasts, unlike vampires, to assume many different forms and variations, the most well-known of these amount to different species of animals, from lizards, to wolves, to even bears. Setting this to zero means no werebeasts will exist, and will also remove a large amount of fun from the game.

Token Example Notes
[WEREBEAST_NUMBER:<number>] [WEREBEAST_NUMBER:58] 0 to 1000

Attack Population Requirement[edit]

Werebeasts will begin to attack your fort once at least this many dwarves inhabit it, regardless of whether any other attack criteria have been met. This number defaults to 50 which will often be reached in the second year of the fort.

Exported Wealth Requirement[edit]

Werebeasts will begin to attack your fort once you have exported at least this many dwarfbucks-worth of goods, regardless of whether or not any other criteria have been met. This parameter defaults to 5000.

Created Wealth Requirement[edit]

Werebeasts will begin to attack your fort once the fort's total wealth has reached this many dwarfbucks in value. This happens regardless of whether any of the other criteria, such as population, have been met; therefore, even with 1 dwarf, a fort could be attacked if the fort were worth at least this value.

Token Example Notes
[WEREBEAST_ATTACK_TRIGGER:<population>:<exp wealth>:<created wealth>] [WEREBEAST_ATTACK_TRIGGER:50:5000:50000] 0 = None (disabled). Only one requirement must be met for an attack.

Number of Secret Types[edit]

The number of secrets that exist in the world. Currently, all secrets are secrets of life and death, and the ones holding these secrets are necromancers, thus, setting this to zero means that no necromancers will appear. Non-necromancer towers can still appear (extremely rarely) with zero secrets, constructed by independent undead groups. The primary difference between having 1 or 1000 secrets is the chance of your world having any necromancer towers at all. With 1, this chance is low. With the default number, it's seemingly guaranteed. Even with 1 secret, if you have any necromancer towers at all, it is likely a great number will quickly appear in world generation (though this isn't guaranteed).

Token Example Notes
[SECRET_NUMBER:<number>] [SECRET_NUMBER:52] 0 to 1000

Number of Regional Interaction Types[edit]

The number of interactions that can be caused in regions, which may incorporate evil rain and cloud types. Currently, only evil region interactions are generated this way.

Token Example Notes
[REGIONAL_INTERACTION_NUMBER:<number>] [REGIONAL_INTERACTION_NUMBER:20] 0 to 1000

Number of Disturbance Interaction Types[edit]

The number of different disturbed dead[Verify] that can exist in the world. Setting this to zero, while being pointless as is, (since you're never forced to enter a tomb anyway), will most likely prevent any toilet roll spooks from appearing, but it may or may not also prevent the existence of the pyramids which house them too. Note that you will still have the manifold traps to contend with.

Token Example Notes
[DISTURBANCE_INTERACTION_NUMBER:<number>] [DISTURBANCE_INTERACTION_NUMBER:10] 0 to 1000

Number of Evil Cloud / Evil Rain Types[edit]

This number specifies the total amount of various face-melting, eye-boiling, and zombifyingly-fun clouds of pure evil may appear in your world. Setting this to zero means you no longer will ever have to deal with encroaching dust walls of doom in that world. I'd keep this value low...

Token Example Notes
[EVIL_CLOUD_NUMBER:<number>] [EVIL_CLOUD_NUMBER:45] 0 to 1000

The latter number states how many different types of green-ooze drenchers, disconcerting blood-showers, and sickly yellow slime-baths can occur in your world. Compared to evil clouds though, this one hardly is worth stressing out about, usually.... Setting this to zero means the only semi-solid to fully-liquid fluids to fall from the sky will be pure H2O.

Token Example Notes
[EVIL_RAIN_NUMBER:<number>] [EVIL_RAIN_NUMBER:352] 0 to 1000

Generate Divine Materials[edit]

This turns the generation of divine metals on or off. It does not influence the creation of vaults. Probably determines whenever or not using divination dice spawns weapons.

Token Example Notes
[GENERATE_DIVINE_MATERIALS:<1 or 0>] [GENERATE_DIVINE_MATERIALS:1] 1/0 = Yes/No

Allow Divination, Experiments, and Necromancy types[edit]

These allow or disallow divination, demon or necromancer experiments, and the more advanced necromancer abilities.

Token Example Notes
[ALLOW_DIVINATION:<1 or 0>] [ALLOW_DIVINATION:1] 1/0 = Yes/No
[ALLOW_DEMONIC_EXPERIMENTS:<1 or 0>] [ALLOW_DEMONIC_EXPERIMENTS:1] 1/0 = Yes/No
[ALLOW_NECROMANCER_EXPERIMENTS:<1 or 0>] [ALLOW_NECROMANCER_EXPERIMENTS:1] 1/0 = Yes/No
[ALLOW_NECROMANCER_LIEUTENANTS:<1 or 0>] [ALLOW_NECROMANCER_LIEUTENANTS:1] 1/0 = Yes/No
[ALLOW_NECROMANCER_GHOULS:<1 or 0>] [ALLOW_NECROMANCER_GHOULS:1] 1/0 = Yes/No
[ALLOW_NECROMANCER_SUMMONS:<1 or 0>] [ALLOW_NECROMANCER_SUMMONS:1] 1/0 = Yes/No

Desired Good/Evil Square Counts[edit]

These values change the amount of good or evil tiles on the map, depending on the size of the region they are being considered for. The counts are for all tiles in all subregions of a given size considered together, not counts for each subregion considered separately (all tiles in the same subregion share the same surroundings values).

As used here, a "subregion" is a named world area. Subregion names and locations for a generated world are viewable in legends mode under "Regions". Subregions are classified by size the same way for all map sizes: 1-24 tiles is Small, 25-99 tiles is Medium, and 100+ tiles is Large.

The counts used here will always be restricted to regions of the given size, no matter how large the count. Also, the count is more of a goal than a minimum or maximum. As a result, you can end up with many more or many fewer than the requested number of squares in some situations. In particular, if you have something like a case where only 3 large regions exist in a world, and you request "1 evil square" in large regions, you will end up with one of the large regions being entirely evil. So any non-zero value in one of these settings essentially means "force at least one region of this size to be all good/evil."

Note that the "evilness" of evil biomes is also impacted by savagery. Certain civilizations cannot exist in good and/or evil squares, so too many of one or the other may limit the size of certain types of civilizations - dwarves, for example, need non-aligned biomes. Creating too many evil biomes seems to lead to the danger of many civilizations' early extinction.

Token Example Notes
[GOOD_SQ_COUNTS:<small region>:<med region>:<lg region>] [GOOD_SQ_COUNTS:100:1000:2000] Set count to zero to disable for that region size.
[EVIL_SQ_COUNTS:<small region>:<med region>:<lg region>] [EVIL_SQ_COUNTS:100:1000:2000]

Minimum Biome Square Counts[edit]

These numbers control whether or not a world will be rejected based on a lack of different biomes. Raising these numbers will not automatically generate the given number of squares of the given biome! For a biome to exist, certain conditions like elevation and rainfall must exist.

These parameters simply filter out worlds that (for example) randomly fail to have enough high elevation squares to support a given number of mountains, etc. Some settings may cause worlds to always be rejected. For example, if for some reason the maximum elevation parameter is set to a value below what will support mountain biomes, it will be impossible to satisfy a non-zero requirement for mountain squares. The same principle goes for other conditions and biomes such as low elevations and oceans, etc.

Certain civilizations require different biomes to exist (such as dwarves and mountains), so eliminating certain biomes will make it impossible for certain civilizations to form.

These parameters often result in infinite world rejection problems. See World rejection for information on solving problems related to worlds always being rejected due to one or more of these parameters.

0 means no minimum for rejection - setting it to 0 does not guarantee 0 squares of that biome.

Biome Type Requirement Table[edit]

Terrain requirements for various biomes are described below.[Verify] Note that some of the exact ranges are unknown.

Biome Terrain Requirement
Elevation Rainfall Temperature Drainage
Swamp/Marsh 100-299 33-100 Non-Freezing 0-32
Desert/Badland 100-299 0-9 non-freezing note1
Forest 100-299 66-100 non-freezing 66-100
Mountains 300-400 N/A N/A N/A
Ocean 0-99 N/A N/A N/A
Glacier 100-299 N/A Freezing 80(?)-100
Tundra 100-299 N/A Freezing 0-66
Grassland 100-299 0-66 Non-Freezing 0-66
Hills 100-299 0-66 Non-Freezing 66-100

note1 drainage: 00-32 sand desert, 33-49 rocky wasteland, 50-65 rocky wasteland but different characters/appearance, 66-100 badlands

Minimum Initial Square Count[edit]

Note: The exclusive purpose of these parameters is to cause world rejection.

This is the minimum number of squares of the given biome that must exist before things like erosion take place. One thing to keep in mind is the maximum number of squares on a map of a given size - if the total number of squares on a map is lower than the sum of all square count parameters, then you will get infinite world rejection.

To determine the number of squares on a map, just multiply the dimensions. In practice these parameters will need to sum to lower than the maximum because some space is needed for "slack".

Map Size Number of Squares
17×17 289
33×33 1089
65×65 4225
129×129 16614
257×257 66049

Minimum Initial Region Count[edit]

This is the minimum number of regions of contiguous biome squares that must exist before other processes such as erosion take place.

Minimum Final Region Count[edit]

This many regions of the given biome must exist after erosion and similar phases of generation have been completed.

Token Example
[REGION_COUNTS:SWAMP:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:SWAMP:1032:7:6]
[REGION_COUNTS:DESERT:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:DESERT:1032:7:6]
[REGION_COUNTS:FOREST:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:FOREST:4128:13:12]
[REGION_COUNTS:MOUNTAINS:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:MOUNTAINS:8256:9:9]
[REGION_COUNTS:OCEAN:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:OCEAN:8256:7:6]
[REGION_COUNTS:GLACIER:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:GLACIER:0:0:0]
[REGION_COUNTS:TUNDRA:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:TUNDRA:0:0:0]
[REGION_COUNTS:GRASSLAND:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:GRASSLAND:8256:13:12]
[REGION_COUNTS:HILLS:<init sq>:<init rg>:<final rg>] [REGION_COUNTS:HILLS:8256:13:12]

Erosion Cycle Count[edit]

Tells the world generator how long the world has to erode its tall peaks down to mountainsides during the 'running rivers...' stage of world creation. The higher this number, the less jagged the world will be, and the more wide the major rivers will be. If you use the maximum number, your mountains will dissolve before your eyes into plains which can lead to rejections if there aren't enough mountains to use for river start points and dwarven civilization origin points.

Token Example Notes
[EROSION_CYCLE_COUNT:<number>] [EROSION_CYCLE_COUNT:250] Range: 0 to 1000

Minimum/Desired River Start Locations[edit]

This is the minimum number of riverheads that must exist before and after erosion takes place. Worlds will be rejected if they fail to meet these numbers. As with minimum biome counts, raising this number doesn't automatically create this many riverheads. Other conditions like terrain and rainfall must exist for rivers to form.

Extremely high pre-erosion values speed erosion greatly, while low post erosion values are useful for limiting rejects due to lack of river origin points. One can try the 800 value to get more lakes.

Token Example Notes
[RIVER_MINS:<min pre-erosion>:<des post-erosion>] [RIVER_MINS:200:400] Range: 0 to 800

Periodically Erode Extreme Cliffs[edit]

If enabled, makes every impassable rock wall into a series of ramps. Some prefer to pump up erosion to about 250, and turn the "Desired pre-erosion river count" to 0 for good erosion and no extra canyons.

Normally this is set to Yes (1).

Token Example Notes
[PERIODICALLY_ERODE_EXTREMES:<1 or 0>] [PERIODICALLY_ERODE_EXTREMES:1] 1/0 = Yes/No

Do Orographic Precipitation and Rain Shadows[edit]

Toggle that allows terrain height to affect rainfall. For example, moist air coming from the ocean blows over the land. As the terrain gets higher, it forces the moist air up, causing it to rain on the seaward side of a mountain. Eventually, all the rain has fallen if the mountain is tall enough. So, when the breeze goes over the top, there's no moisture left to fall on the other side, creating a rain-shadow. In the current version, regions where drainage is above 50 will also create rain shadows, regardless of the underlying biome and elevation.[2]

Turning this on should create a tendency for more extreme rainfall in regions, creating more forests, deserts, marshlands, and grasslands. Also note that it can create rainfall outside of min-max rainfall settings, so even in a world with a 0 max rainfall you may get rainfall biomes. Turning it off should result in more controllable, less complex rainfall conditions based on rainfall parameters as it adds a random element which can distort or otherwise mess up the climates on a pregenerated map.

This should be disabled if you're importing a map or using a preset map file that has weather.

Token Example Notes
[OROGRAPHIC_PRECIPITATION:<1 or 0>] [OROGRAPHIC_PRECIPITATION:1] 1/0 = Yes/No

Maximum Number of Subregions[edit]

This is the number of separate biomes (the flashing regions you see on embark when you hit F1, F2, etc. when there's more than one biome on the embark location) that are allowed to exist on the entire map.

Setting this to very low values will result in numerous rejections depending on variance parameters. If variance values are set to high numbers, many small biomes will be created causing rejection if this parameter value is not increased beyond the default.

Increasing the value of this tag is often a must when generating "patchwork" worlds with lots of biome variance, but simply increasing it without increasing variance parameters will not guarantee more biomes.

It is also interesting to note that the maximum subregions is 5000 which is more than the total number of squares for a pocket or small map. However, for a medium or large map (16641 or 66049 squares) it quickly becomes a mere fraction of the total number of possible subregions. In fact it would be quite easy on a large map to end up with far too many subregions and get endless rejections of this type.

Token Example Notes
[SUBREGION_MAX:<number>] [SUBREGION_MAX:2750] Range: 1 to 5000

Cavern Parameters[edit]

Caverns are the hollow areas underground, which dwarves tend to encounter when they're digging around. The Cavern Layer Number parameter determines how many cavern systems will be generated, not including the magma layer or the Bottom layer. Defaults to three. Setting it to lower values could help FPS.


Setting it to 2 will merge cavern 3 species into the 2nd cavern, and setting it to 1 will merge all into one cavern. However, disabling them entirely by setting it to 0 will make it impossible to grow any underground plants, as none will exist for your civilization to cultivate, nor will they be available on embark.

  • Setting caverns to a sub-3 number (Spoiler, highlight to view) erases about one-third of HFS spiresBug:10267 and prevents dig deep disasters. Additionally, random plant or animal species can be more frequently absent.
Token Example Notes
[CAVERN_LAYER_COUNT:<number>] [CAVERN_LAYER_COUNT:3] Range: 0 to 3

Cavern Layout Parameters[edit]

Open caverns and dense passageways are not mutually exclusive. When both are raised, bizarre results can occur, such as layers showing a combination of open caverns, a cluster of network passages, and natural walls sprinkling the inside of an otherwise open cavern. Reference

If you want the largest open spaces possible, then decrease the density and increase the openness. If you want a labyrinth of passageways, lower the openness and raise the passage density.

Another interesting note about the cavern layers is that the seed and number of demon types affect the layout of the caverns.

Layer Openness Min/Max[edit]

Dictates the size of cavern passages. When Passage Density (see below) is set to minimum (0), caverns will be open expanses. Raising the maximum will increase the size of the caverns.

Token Example Notes
[CAVERN_LAYER_OPENNESS_MIN:<number>] [CAVERN_LAYER_OPENNESS_MIN:0] Range: 0 to 100
[CAVERN_LAYER_OPENNESS_MAX:<number>] [CAVERN_LAYER_OPENNESS_MAX:100]
Layer Passage Density Min/Max[edit]

This determines how many passages form the cavern. If openness (see above) is set to minimum and density increased, then you will get a maze-like network of small criss-crossing passages. Raising the values further increases the number of the maze-like passages.

Caverns will be large, open spaces at 0, and comprised of many small vertical shafts of rock at 100. Setting both values to be the same results in a uniform look for the caverns.[Verify]

Token Example Notes
[CAVERN_LAYER_PASSAGE_DENSITY_MIN:<number>] [CAVERN_LAYER_PASSAGE_DENSITY_MIN:0] Range: 0 to 100
[CAVERN_LAYER_PASSAGE_DENSITY_MAX:<number>] [CAVERN_LAYER_PASSAGE_DENSITY_MAX:100]
Layer Water min\max[edit]

Determines how many caverns (out of a max. 3) will have water at the bottom. Note that, even at 100, there will be some amount of ground in caverns, but each cavern 'bubble' will contain some amount of water.

At 0, there will be no water in your caverns. This may impact future underground plant growth, although maps will still start with underground flora.[Verify]

Token Example Notes
[CAVERN_LAYER_WATER_MIN:<number>] [CAVERN_LAYER_WATER_MIN:0] Range: 0 to 100
[CAVERN_LAYER_WATER_MAX:<number>] [CAVERN_LAYER_WATER_MAX:100]

Magma Layer[edit]

This parameter controls whether the magma sea exists.

Setting 1/Yes causes the magma layer to exist, value 0/No prevents it. Appears not to have any impact on volcanoes nor volcanism, so even if 0/No, there will still be embark locations with magma. If a volcano exists, it appears to always tap the magma sea, but the magma sea will not be revealed by revealing the volcano.

Token Example
[HAVE_BOTTOM_LAYER_1:<1 or 0>] [HAVE_BOTTOM_LAYER_1:1]

Bottom Layer[edit]

Determines if the space below the magma sea exists. If Yes the "HFS" layer is always present. Normally you want to leave this set to Yes for maximum fun.

If enabled, this will force the magma layer above it.

Token Example
[HAVE_BOTTOM_LAYER_2:<1 or 0>] [HAVE_BOTTOM_LAYER_2:1]

Z Levels (Depth) Settings[edit]

These parameters control the "thickness" of various "layers" on the map. Note that a "layer" in this case does not refer to one Z-level, but refers to a number of related Z-levels such as "levels above ground".

The following table assumes that you have 3 cavern layers. (out of a minimum of 0-3) The Levels Above Layer settings control how many Z-Levels are above each layer. A layer may itself consist of multiple Z-Levels (and almost always does).

Setting Name Token Description
Above Ground [LEVELS_ABOVE_GROUND:<number>] The number of Z-levels of air above the highest surface level.
Has no impact on how many Z-levels deep the surface layer is.
Above layer 1 [LEVELS_ABOVE_LAYER_1:<number>] Z-levels of stone above the first cavern layer. Making this higher will guarantee at least this many levels to build your fortress, but will have no impact on how many z-levels thick the surface layer is. Also, the top of a cavern may be higher than the rest of a cavern, so in practice there will be more "solid" levels than this above the cavern.

As of version 0.31.25 this setting is inaccurate. The actual number of z-levels may vary in a range of approx. ±5, which may result in non-existence of any solid z-levels between a surface layer and first cavern layer.

Above Layer 2 [LEVELS_ABOVE_LAYER_2:<number>] Z-levels of earth between the very top of the second cavern and the very bottom of the first cavern.
Above Layer 3 [LEVELS_ABOVE_LAYER_3:<number>] Z-levels of earth between the very top of the third cavern and the very bottom of the second cavern.
Above Layer 4 [LEVELS_ABOVE_LAYER_4:<number>] Z-levels of earth between the very highest magma and the very bottom of the third cavern.
Spoiler Hidden (select invisible text to read): Making this high will give a large area for HFS veins, so that it never touches caverns, giving more to mine if it was impacting the cavern previously.
Above Layer 5 [LEVELS_ABOVE_LAYER_5:<number>] Uncertain. May control the number of levels of "Semi Molten Rock" between HFS and Magma, may control number of levels of magma, may impact both.
In experimentation, the overall depth of all magma sea and semi-molten rock levels appears to increase, but not consistent enough to say for certain.
Only valid if Magma Layer present.
Spoiler Hidden:Often the HFS vein will only extend as high as the highest magma, making this the only guaranteed way to increase amount of HFS to mine, but unfortunately also creating enormous useless semi-molten z-levels
At Bottom [LEVELS_AT_BOTTOM:<number>] Appears to be number of levels of HFS chamber. Only valid if Bottom Layer present, often having no impact. Values larger than default result in strange things.

Some implications:

  • The number of surface layers (e.g. soil), at this time, cannot be controlled. For example, on a map with 1 layer of peat, then a layer of silt, then a layer of obsidian, there is no control to let you increase either one to be, say, 20 z-levels. (though you may get lucky with the obsidian).
  • There can be multiple stone layers between the cavern and the surface, so, increasing Levels Above Layer 1 may give you more conglomerate or more granite, and you have no control over which stone layer spans those Z-levels.
  • The layers shown on embark span across the cavern layers in an unknown and inconsistent way. Sometimes those 10 different layers of stone are evenly distributed over your 400 z-level deep map, sometimes the first 9 get 1 z-level each and the last gets the other 391 levels. No way to control found yet.
  • The HFS chamber, if present, will always extend into the rock layers, and appears to always make contact with the bottom cave. Large values for levels above layer 5 and layer 4 can result in enormous chambers, but the number of levels at the top (the part with undead) appears to be unaffected.
  • Unconfirmed whether number of levels between caverns has any impact on cavern height. There will be connecting ramps and/or shafts between cavern layers no matter how many levels are between them.
  • Very Important: These values appear to apply across a whole 16x16 region, not just embark areas. That means that if a 16x16 region is completely flat, but has one tall mountain in one far corner, even if you set Levels Above Ground low (e.g. 2 z-levels) you still have all the empty air of the highest mountain in every embark tile (e.g. 200 z-levels). Also can happen to the semi-molten layer, and can lead to unexpected behavior.
  • Very large or small values can cause strange things to happen.

Cave Parameters[edit]

Caves are somewhat like caverns, except that they have a passage to the surface, and are generally much smaller – caves can connect to caverns if they are sufficiently deep.

Minimum/Maximum Natural Cave Size[edit]

These parameters appear to control the length and depth of caves.

Token Example Notes
[CAVE_MIN_SIZE:<number>] [CAVE_MIN_SIZE:5] Range: 1 to 500
[CAVE_MAX_SIZE:<number>] [CAVE_MAX_SIZE:25]

Number of Non-Mountain Caves[edit]

The number of non-mountainous caves that will be generated. Lurking kobolds set up shop in caves, and store their stolen items there - a setting of 0 in both will stop kobold civilizations from appearing. Special note: a cave is not a lair.

Token Example Notes
[MOUNTAIN_CAVE_MIN:<number>] [MOUNTAIN_CAVE_MIN:100] Range: 0 to 800
[NON_MOUNTAIN_CAVE_MIN:<number>] [NON_MOUNTAIN_CAVE_MIN:200]

Make Caves Visible[edit]

If set to no (default) then the location of caves will not be marked on the map. If set to yes, caves will appear on the map so that they may be sought out or avoided as desired.

Token Example Notes
[ALL_CAVES_VISIBLE:<1 or 0>] [ALL_CAVES_VISIBLE:0] 1/0 = Yes/No

Allow Init Options to Show Tunnels[edit]

If enabled, you will be able to see the underground tunnels often built by dwarves on the world map, and they will appear as black lines, similar to roads.

Token Example Notes
[SHOW_EMBARK_TUNNEL:<0-2>] [SHOW_EMBARK_TUNNEL:2] 0 = No
1 = Only in Finder
2 = Always

Number of Civilizations[edit]

This number of civilizations will be placed on the map before history generation begins. These civilizations may later die out due to historical events. It is noteworthy that the chance for any given civilization to be destroyed through megabeasts decreases with a higher total number of civilizations presentdata. The five races are dwarf, elf, human, goblin, and kobold; they will generally be placed in equal numbers until the quota has been reached. If there are not enough biomes or other worldgen prerequisites for an even distribution, certain civs will be much more or less frequent than othersdata. If there is an odd number of civs (not divisible by 5), then the remainder is distributed randomly. Kobold civs require caves to be placed; if no caves exist, then kobolds are skipped and will not appear. This does not cause rejections data.

Note that a high value here can cause lots of map rejections, particularly on smaller maps as there simply isn't enough room or regions to put them all in.

Token Example Notes
[TOTAL_CIV_NUMBER:<number>] [TOTAL_CIV_NUMBER:40] Range: 0 to 300

Playable Civilization Required[edit]

If this is set to yes (default) then worlds will be rejected if no civilization with CIV_CONTROLLABLE can be placed. In an unmodded game, only the dwarves have this token.

If set to no, the result may be a world that cannot be played in Fortress Mode.

Token Example Notes
[PLAYABLE_CIVILIZATION_REQUIRED:<1 or 0>] [PLAYABLE_CIVILIZATION_REQUIRED:1] 1/0 = Yes/No

Minimum Number of Mid/Low/High Characteristic Squares[edit]

Sets the minimum possible number of squares of certain ranges of each of the region qualities, such as elevation, rain, drainage, volcanism, savagery, and temperature. These need to be changed to reflect your regional meshes and weights, and are responsible for a HUGE number of map rejections. These values can all be set to 0 for much fewer map rejections, particularly in the case of more wacky, non-standard maps.

These values will cause worlds to be rejected unless at least the given number of squares of the given type are randomly generated. Setting these values too high could result in worlds always being rejected if other parameters such as the maximum/minimums for elevation, etc., don't allow enough of those squares to get generated.

Token Example Notes
[ELEVATION_RANGES:<low sq>:<mid sq>:<high sq>] [ELEVATION_RANGES:8256:16512:8256] Minimum number of squares that must have low, medium, and high amounts of the given attribute.

0 = No minimum

[RAIN_RANGES:<low sq>:<mid sq>:<high sq>] [RAIN_RANGES:8256:16512:8256]
[DRAINAGE_RANGES:<low sq>:<mid sq>:<high sq>] [DRAINAGE_RANGES:8256:16512:8256]
[SAVAGERY_RANGES:<low sq>:<mid sq>:<high sq>] [SAVAGERY_RANGES:8256:16512:8256]
[VOLCANISM_RANGES:<low sq>:<mid sq>:<high sq>] [VOLCANISM_RANGES:8256:16512:8256]

World rejection[edit]

Main article: World rejection

If you are having the common problem of generated worlds always being rejected by the world generator, see Solving World Rejection Problems (v0.31 page) as it contains many detailed suggestions on how to troubleshoot and solve these issues.

Default Worldgen Parameters[edit]

There is no single default for each parameter. Several advanced world generation profiles come with the game by default. See Default world_gen.txt to take a look at this file.

Parameter Set Examples[edit]

If you're trying to do something specific, then the Worldgen examples - complete parameter sets that can be copied directly into your world_gen.txt file and customized as desired - might be helpful. If none of the examples suit your needs, Worldgen tricks has strategies and tips on making a world just right for you.

For many, many more examples see:

Worlds
General
Map
Biomes
Chasm · Desert · Forest · Glacier · Grassland · Lake · Mountain · Murky pool · Ocean · River · Savanna · Shrubland · Tundra · Wetland
Features
Aquifer · Brook · Deep pit · Island · Magma pool · Passage · Road · Tunnel · Volcano · Waterfall
Underground
Civilization
Sites
Camp · Castle · Cave · Dark fortress · Dark pits · Forest retreat · Fort · Fortress · Hamlet · Hillocks · Labyrinth · Lair · Monastery · Mountain halls · Ruins · Shrine · Tomb · Tower · Town · Vault
Structures
Other