- v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
- Use this page to report any issues related to the migration.
Difference between revisions of "v0.31:Cave-in"
| Line 30: | Line 30: | ||
Do not make unconnected sections of rock. | Do not make unconnected sections of rock. | ||
| − | Actually, you're quite unlikely to cause cave-ins unless you are actively trying to cause them. In which case, you'd be wondering how to avoid cave-ins that ''cause damage'' to your folks. That's simple: Add a {{L|support}} under the stone mass, and link it to a distant {{L|lever}}. When you're done, hide everyone, pull the lever and watch the fireworks. | + | Actually, you're quite unlikely to cause cave-ins unless you are actively trying to cause them. In which case, you'd be wondering how to avoid cave-ins that ''cause damage'' to your folks. That's simple: Add a {{L|support}} under the stone mass, and link it to a distant {{L|lever}}. When you're done, hide everyone, pull the lever and watch the fireworks. If you're feeling lazier, use statues to keep dorfs off the wrong squares. Provided they move directly away from the cave-in area, the dust may not catch them - and they don't blunder off edges and die unless the dust catches them. |
One of the more common accidental cave-ins results when you're taking out the floor in a checker-pattern (dwarves {{L|channel}}ing may sometimes tend to make this mistake) and the area below isn't supported, resulting in a situation like the diagram below: | One of the more common accidental cave-ins results when you're taking out the floor in a checker-pattern (dwarves {{L|channel}}ing may sometimes tend to make this mistake) and the area below isn't supported, resulting in a situation like the diagram below: | ||
Revision as of 05:42, 26 August 2010
| This article is about an older version of DF. |
A cave-in is when walls, floors, and objects plummet downwards to lower Template:L under the influence of Template:L. A cave-in will occur if constructions or ground tiles are detached from all support (bridges do not support constructions). Since it is only a placeholder, the system is highly unrealistic—you can hold up a giant megafortress by a slender pillar of soap. Toady One has stated he intends to implement more realistic cave-ins in future versions.
Cave-ins can be disabled through the Template:L file, by changing [CAVEINS:YES] to [CAVEINS:NO].
How cave-ins work
Any disconnected Template:L or section of Template:L or Template:L will cave in. The game checks for connections along the X, Y, and Z axes (that's left/right, up/down, and high/low). Any construction, even Template:Ls (natural or constructed), and Template:Ls (naturally) provide support/connections. Diagonal connections and Template:Ls do not.
Results of a cave-in
- Any Template:L caught underneath or on top of the falling material is crushed and badly injured, if not killed.
- Any Template:L caught directly underneath (on the same tile underneath) a cave-in is killed, no exception.
- Any item caught under falling natural walls is destroyed completely. Natural floors and constructed walls and floors have a small chance of destroying items.[Verify]
- Anything standing on the area that caves in falls and may get away with being stunned. The fall victim has a chance of being unable to walk away, somewhat proportional to the distance fallen but not set in stone.
NoPun intended. - A large amount of dust is generated. Any creature caught by the dust from the collapse is knocked Template:L can be thrown a few tiles, which may cause them to fall off, say, a narrow bridge fifty z-levels above the ground. Your dwarfs will receive an unhappy thought from choking on dust clouds (it won't matter if your dwarf is dead though).
- All Template:Ls and non-wall Template:Ls under the falling area are destroyed. Buildings above the cave-in will deconstruct if they are no longer supported.
- Natural terrain will remain intact during the cave-in; the only effect is they are revealed. [Verify]
- Constructions will deconstruct when they collide with solid terrain.
- Any terrain crashes through multiple Template:Ls, and stops only upon reaching solid ground or a constructed wall, where natural terrain piles up and constructions deconstruct.
- Mined stairs and Template:Ls will settle like unmined rock; Stairs down that fall onto previously empty Template:Ls will reveal the level below. If there's rock or floor above them, it'll cover the stairs.
- Anything falling into a fluid sinks to the bottom. Therefore, it is not a good idea to punch a skylight into your meeting area if you forgot that e.g. your Template:L pile was directly below and you had a Template:L tube three Z levels afterward... you get the idea.
- Any water displaced by falling natural walls is not destroyed, but displaced upwards(!) to directly on top of the fallen walls. [Verify]
- Soil walls tend to turn into a different soil type when they fall into a stone layer.
- Template:L will be generated in all tiles of magma that were in the path of the cave-in.
Avoiding cave-ins
Do not make unconnected sections of rock.
Actually, you're quite unlikely to cause cave-ins unless you are actively trying to cause them. In which case, you'd be wondering how to avoid cave-ins that cause damage to your folks. That's simple: Add a Template:L under the stone mass, and link it to a distant Template:L. When you're done, hide everyone, pull the lever and watch the fireworks. If you're feeling lazier, use statues to keep dorfs off the wrong squares. Provided they move directly away from the cave-in area, the dust may not catch them - and they don't blunder off edges and die unless the dust catches them.
One of the more common accidental cave-ins results when you're taking out the floor in a checker-pattern (dwarves Template:Ling may sometimes tend to make this mistake) and the area below isn't supported, resulting in a situation like the diagram below:
Floor -1 ▒▒▒▒▒▒ ▒ ▒ ▒ X +▒ <-- The X is a floor tile. It's not attached, so it will fall down. ▒ +>▒ ▒ ▒ ▒▒▒▒▒▒ Floor -2 ▒▒▒▒▒▒ ▒....▒ ▒...▒▒ <-- Causing this area to receive a cave-in flow and knocking out any dwarves in its reach. ▒...<▒ ▒....▒ ▒▒▒▒▒▒
Another thing to watch out for is if you want to dig away a hill above ground, to make room for your fancy overground fort. You may dig away the hill on one level, and then have a huge platform of "floor" on the z-level above that falls on your Template:L if they get disconnected from the ground. Easy thing to miss the first time you do it.
The solution here is to dig ramps instead, since these take away both the Template:L on the level you are digging on and the floor on the level above. This is not foolproof, however, as Template:Ls will prevent the floor it's on from being removed, resulting a free-hanging floor when you carve the ramp around it. In addition, ramps do not provide support for other tiles on the higher z-level; depending upon the order they are constructed, cave-ins may still occur.
Using cave-ins
Intentional cave-ins serve several purposes:
- Defense
- Use cave-ins to block off water approaches to underground cavern levels. Combined with walls higher up, a cavern can (with great effort) be rendered completely safe from all intruding vermin.
- Death
- Since a cave-in kills all Template:L instantly, it can provide a Template:L or amusing way to off a group of creatures. This is also one of the most effective ways of dealing with a bug in which many Template:Ls/Template:Ls are unkillable by normal means. v0.31.03
- Removal of floor tiles
- Causing a cave-in will destroy non-reinforced (no wall or support underneath) floor tiles directly underneath the falling terrain - this is a good way to e.g. hollow out a large area. All that's left to do is a little bit of cleanup on the edges, but look at all the channeling you save yourself!
- Destroying items
- Elven siege left behind a bunch of worthless wooden weapons? Got some fire imp fat in your butcher's shop? Need an amusing way to off your stone? Smash it with a cave-in and you'll never see it again. [Verify]
- Breaking through multiple aquifer levels [Verify]
- Showcase with two levels: User:Rhenaya/HowtoDualAquifer
- Trapping [TRAPAVOID] creatures
- Since the dust from a cave in knocks out creatures, and any unconscious creature triggers a trap [Verify] (This includes your dwarves and other friendly creatures), combine a cave in with cage traps for the capture.
Caving-in the toplevel/terrain from inside
You can cause terrain above you to cave in without going outside by first mining up stairs below the "borderline" you want to channel, and then channeling the tiles above them. The tiles above the up stairs can be mined from below while standing on the stair, so you don't have to go outside. Ramps would also work for that alone, but the ramps would allow enemies to enter, whereas the up-stairs alone do not allow passage to above as there is no corresponding down-stair above them.
| Rooms |
Barracks • Bedroom • Dining room • Dormitory • Jail • Meeting hall • Hospital • Office • Sculpture garden • Tomb • Zoo |
|---|---|
| Furniture |
Animal trap • Anvil • Armor stand • Bed • Bin • Box • Bucket • Cabinet • Cage • Coffin • Restraint • Seat • Statue • Table • Weapon rack |
| Access | |
| Constructions | |
| Machine & Trap parts |
Axle • Gear assembly • Millstone • Screw pump • Water wheel • Windmill • Lever • Pressure plate • Trap • Support |
| Other Buildings | |
| Related Articles | |