Graphics token

!!UNKNOWN!!  · xTATTEREDx  · +FINE+  · *SUPERIOR*  · ≡EXCEPTIONAL≡  · ☼MASTERWORK☼

v50.14 · v0.47.05 This article is about the current version of DF. Note that some content may still need to be updated. More Info · V

For an explanation of how to use the various graphics types, see Graphics.

The [OBJECT:GRAPHICS] token defines the use of various tile-based graphics in the game. As of version 50.01, graphics tokens have been greatly expanded to accommodate the release of the Steam & Itch premium version. These tokens, and explanations on how to use them, are listed below; the list will expand as the tokens are discovered and understood.

Creature Graphics

Creature graphics are found within graphics_creature_x files (such as graphics_creature_domestic or graphics_creature_layered). All graphics files must begin with the file name, followed by the [OBJECT:GRAPHICS] type that tells the game that the file contains graphics definitions. A more detailed explanation on how to use these can be found in creature graphics.

Types

Type	Arguments	Description
CREATURE_GRAPHICS	creature id	The simplest and most common form of creature graphics for defining one sprite for each basic condition. Further conditions are required for this to function following the creature graphics format. Accepts large graphics tokens. Additionally used to start defining a layered graphics set.
CREATURE_CASTE_GRAPHICS	creature id Caste ID	Nearly the same as [CREATURE_GRAPHICS], but allows a separate sprite to be defined for [MALE] and [FEMALE] castes. A simple alternative to Layered Graphics. Requires conditions defined in creature graphics format. Accepts large graphics tokens.
STATUE_CREATURE_GRAPHICS	creature id	Format for beginning a creature statue definition. Defines a 1x2 vertical rectangle to be displayed when a statue depicts one of these creatures.
TILE_GRAPHICS_RECTANGLE	creature id	Graphics for a 3x2 rectangle that is used exclusively for representing Forgotten Beasts based on their body parts. Uses forgotten beast graphics.

Basic Conditions

Different graphics can be defined for the same creature based on some properties about it. Below is a list of all conditions that can be used for creature graphics that accept a condition token.

Condition	Accepts Secondary	Description
DEFAULT	No	The default condition that will be displayed unless overwritten by a more specific one below.
CHILD	Yes	Will only be displayed if the creature is a [CHILD] or [BABY] and is younger than one of those ages.
ANIMATED	Yes	Displayed if the creature is raised from the dead, although it is not known how this is decided. Raised status is not related to having a syndrome with the class from [CONDITION_SYN_CLASS] or from having [NOT_LIVING]/[OPPOSED_TO_LIFE].
CORPSE	Yes	Displayed as soon as the creature dies.
TRAINED_HUNTER	Yes	Shown for hunting-trained versions of this creature.
TRAINED_WAR	Yes	Shown for war-trained versions of this creature.
LIST_ICON	Unknown	Displayed in menus. Useful for large images that would extend beyond the menu boxes otherwise/
SKELETON	Unknown	Decayed remains of the creature.[Verify]
SKELETON_WITH_SKULL	Unknown	Decayed remains of the creature with a skull.[Verify]

Layered Conditions

Layers aren't very useful on their own, so they come with a set of conditions to define how when they are displayed and how they interact.

Token	Arguments	Type	Description
LAYER_GROUP		Layer Group	Begins defining a layer group. Current effect unknown.[Verify]
END_LAYER_GROUP		Layer Group	marks the end of a layer group. Current effect unknown.[Verify]
CONDITION_ITEM_WORN	BY_CATEGORY / BY_TOKEN category / body part token Armor type (ARMOR, GLOVES, Etc.) Item ID(s)	Armor Wieldables	Defines a clothing or armor graphic by the specific part it is equipped to, the type of armor it is, and the internal id of that item. For example, a condition representing a right handed mitten or glove would be defined as: [CONDITION_ITEM_WORN:BY_TOKEN:RH:GLOVES:ITEM_GLOVES_GLOVES:ITEM:GLOVES:MITTENS]
SHUT_OFF_IF_ITEM_PRESENT	BY_CATEGORY / BY_TOKEN category / body part token Armor type Item ID(s)	Armor	Causes the current layer to not be rendered if the creature has one of the items worn or equipped. Also accepts the input ANY_HELD or WIELD (e.g. WIELD:WEAPON:ANY).
CONDITION_DYE	dye color	Armor	Should represent which color the clothing is dyed. Currently nonfunctional.v50.05
CONDITION_NOT_DYED		Armor	Should check if the clothing is dyed. Currently nonfunctional.v50.05
CONDITION_MATERIAL_FLAG	material flag	Material	Changes graphics based on the material an equipped item is made of. Valid material flags are similar to reactant conditions including: WOVEN_ITEM ANY_X_MATERIAL with X being: PLANT, SILK, YARN, LEATHER, WOOD, SHELL, BONE, STONE, GEM, TOOTH, HORN, PEARL IS_DIVINE_MATERIAL NOT_ARTIFACT IS_CRAFTED_ARTIFACT METAL_ITEM_MATERIAL GLASS_MATERIAL FIRE_BUILD_SAFE MAGMA_BUILD_SAFE among other, less useful ones.
CONDITION_MATERIAL_TYPE	material token	Material	Changes graphics based on the material an equipped item is made of. Valid material types take the form METAL:COPPER where copper can be replaced with any weapons-grade metal. Initial testing has shown that some material tokens are not functional. [CONDITION_MATERIAL_FLAG] is a better option for any material condition other than metal.
CONDITION_PROFESSION_CATEGORY	profession token(s)	General	Checks the profession of the creature to act as a condition. Multiple profession tokens can be chained together.
CONDITION_RANDOM_PART_INDEX	body part integer index integer range	General	Chooses a random layer within the same group of body parts. Index is which option this condition is, out of Range number of options. Ex: [CONDITION_RANDOM_PART_INDEX:HEAD:3:4] Is the third possible random head out of four total options. One of these random conditions each will be put into a set of four slightly different heads to add some random variation in the appearance of the creature's head.
CONDITION_HAUL_COUNT_MIN	integer	General	Counts how many items the creature is hauling. Used for [PACK_ANIMAL]s in vanilla.
CONDITION_HAUL_COUNT_MAX	integer	General	Counts how many items the creature is hauling. Used for [PACK_ANIMAL]s in vanilla.
CONDITION_CHILD	General		Checks if the creature is a child or baby.
CONDITION_NOT_CHILD	General		Checks if the creature is an adult.
CONDITION_GHOST	General		Checks if the creature is a ghost.
CONDITION_SYN_CLASS	SYN_CLASS	Syndrome	Changes graphics based on any syndromes the creature is affected by. Vanilla values include: ZOMBIE NECROMANCER VAMPCURSE RAISED_UNDEAD GHOUL
CONDITION_TISSUE_LAYER	BY_CATEGORY body part category or ALL tissue layer or ALL	Tissue	Selects a tissue layer to use for checking other conditions. Ex: [CONDITION_TISSUE_LAYER:BY_CATEGORY:ALL:SKIN]
TISSUE_MIN_LENGTH	integer	Tissue	Checks the current [CONDITION_TISSUE_LAYER]'s LENGTH appearance modifier. Is true if the LENGTH is greater than the integer input.
TISSUE_MAX_LENGTH	integer	Tissue	Checks the current [CONDITION_TISSUE_LAYER]'s LENGTH appearance modifier. Is true if the LENGTH is less than the integer input.
TISSUE_MAY_HAVE_COLOR	color token(s)	Tissue	Checks the selected tissue's color. Accepts multiple color tokens, and is true if the any of the colors is present in the selected tissues.
TISSUE_MAY_HAVE_SHAPING	styling token	Tissue	Checks the current [CONDITION_TISSUE_LAYER]'s shaping (hairstyle). Valid tokens are NEATLY_COMBED, BRAIDED, DOUBLE_BRAIDS, PONY_TAILS, CLEAN_SHAVEN and STANDARD_HAIR/BEARD/MOUSTACHE/SIDEBURNS_SHAPINGS.[Verify]
TISSUE_NOT_SHAPED		Tissue	Checks the current [CONDITION_TISSUE_LAYER]'s color. Accepts multiple color tokens, and is true if the any of the colors is present in the selected tissues.
TISSUE_SWAP	IF_MIN_CURLY integer tile page id x position y position	Tissue	Checks if a tissue is sufficiently curly, and if so swaps to display a different image. The new image is defined by the tile page ID, x position, and y position. This condition should be within a [LAYER:... ] that has a similar graphic to the on in the TISSUE_SWAP. The current [CONDITION_TISSUE_LAYER] group must also include a [TISSUE_MIN_LENGTH].

Vermin Conditions

Special Conditions for [VERMIN] creature graphics:

Condition	Description
VERMIN	Necessary for defining graphics that use the tokens below.[Verify]
VERMIN_ALT	Image cycles every 1 second.
SWARM_SMALL	For swarming vermin like flies and fairies in small groups.
SWARM_MEDIUM	For swarming vermin like flies and fairies in medium-sized groups.
SWARM_LARGE	For swarming vermin like flies and fairies in large groups.
LIGHT_VERMIN	For fireflies etc. Does not replace [VERMIN].
LIGHT_VERMIN_ALT	Like [VERMIN_ALT] for fireflies etc.
LIGHT_SWARM_SMALL	Like [SWARM_SMALL] for fireflies etc. in small groups.
LIGHT_SWARM_MEDIUM	Like [SWARM_LARGE] for fireflies etc. in large groups.
LIGHT_SWARM_LARGE	Like [SWARM_LARGE] for fireflies etc.
REMAINS	Vermin corpses.
HIVE	Vermin hives.

Item Graphics

Item graphics can also be defined, but are mostly hardcoded. This section of the wiki needs to be fleshed out. Descriptions of the token functions is provisional.

Token	Arguments	Description
TILE_GRAPHICS	Tile page ID x index y index Item ID	Begins defining tile graphics for an item. Sets default tile graphic.[Verify]
BOULDER_GRAPHICS	Tile page ID x index y index Material ID	Defines tile graphics variants to use for BOULDER items by material; currently all boulders use material palette instead.
ROUGH_GEM_GRAPHICS	Tile page ID x index y index Material ID	Defines tile graphics variants to use for ROUGH (gem) items by material; currently all rough gems use material palette instead.
BARS_GRAPHICS	Tile page ID x index y index Material ID or item ID	Defines tile graphics variants to use for BAR items by material.
FOOD_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for FOOD items.
ARMOR_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for ARMOR items; this is for items not being worn by a creature.
GLOVES_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for GLOVES items; this is for items not being worn by a creature.
HELM_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for HELM items; this is for items not being worn by a creature.
PANTS_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for PANTS items; this is for items not being worn by a creature.
SHOES_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for SHOES items; this is for items not being worn by a creature.
SHOES_GRAPHICS_METAL	Tile page ID x index y index Item ID	Defines metal material tile graphics variants for SHOES items; this is for items not being worn by a creature.
SHIELD_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for SHIELD items; this is for items not being worn by a creature.
SHIELD_GRAPHICS_WOODEN	Tile page ID x index y index Item ID	Defines wood material tile graphics variants for SHIELD items; this is for items not being worn by a creature.
TOY_GRAPHICS	Tile page ID x index y index Item ID Material ID	Defines tile graphics for TOY items. Material ID in this case is one of STONE, WOOD, METAL, or GLASS.
TRAPCOMP_GRAPHICS	Tile page ID x index y index Item ID	Defines tile graphics for TRAPCOMP items.
TRAPCOMP_GRAPHICS_WEAPON_TRAP	Tile page ID x index y index	Defines tile graphics for TRAPCOMP items when built into a weapon trap; must follow TRAPCOMP_GRAPHICS.
TRAPCOMP_GRAPHICS_UPRIGHT_#X	Tile page ID x index y index	Defines tile graphics for installed upright spike traps. These comprise two-tile graphics: # is replaced with the number of spikes, 1-10; X is replaced with T (for top graphic tile) or B (bottom graphic tile). This follows the tile graphics definition of either MENACINGSPIKE or SPEAR.
SIEGEAMMO_GRAPHICS	Item ID	Begins defining graphics for SIEGEAMMO items.
SIEGEAMMO_GRAPHICS_STRAIGHT_DEFAULT	Tile page ID x index y index	Defines graphics for ballista arrows aligned orthogonally on the map; follows SEIGEAMMO_GRAPHICS.
SIEGEAMMO_GRAPHICS_STRAIGHT_WOOD	Tile page ID x index y index	Wooden variant of above.
SIEGEAMMO_GRAPHICS_DIAGONAL_DEFAULT	Tile page ID x index y index	Defines graphics for ballista arrows aligned diagonally on the map; follows SEIGEAMMO_GRAPHICS.
SIEGEAMMO_GRAPHICS_DIAGONAL_WOOD	Tile page ID x index y index	Wood variant of above.
AMMO_GRAPHICS	Item ID	Begins defining graphics for AMMO items.
AMMO_GRAPHICS_STRAIGHT_DEFAULT	Tile page ID x index y index	Defines graphics for AMMO items aligned orthogonally on the map; follows AMMO_GRAPHICS.
AMMO_GRAPHICS_STRAIGHT_WOOD	Tile page ID x index y index	Wooden variant of above.
AMMO_GRAPHICS_DIAGONAL_DEFAULT	Tile page ID x index y index	Defines graphics for AMMO aligned diagonally on the map; follows AMMO_GRAPHICS.
AMMO_GRAPHICS_DIAGONAL_WOOD	Tile page ID x index y index	Wood variant of above.
WEAPON_GRAPHICS	Item ID	Begins defining graphics for WEAPON items.
WEAPON_GRAPHICS_DEFAULT	Tile page ID x index y index	Defines default graphics for WEAPON item defined by WEAPON_GRAPHICS not being worn by creatures; follows WEAPON_GRAPHICS.
WEAPON_GRAPHICS_MATERIAL	Tile page ID x index y index	Defines material palette[Verify] graphics for WEAPON item defined by WEAPON_GRAPHICS not being worn by creatures; follows WEAPON_GRAPHICS.
WEAPON_GRAPHICS_WOOD_GROWN	Tile page ID x index y index	Defines graphics for grown-wood WEAPON item defined by WEAPON_GRAPHICS not being worn by creatures; follows WEAPON_GRAPHICS.
WEAPON_GRAPHICS_WOOD	Tile page ID x index y index	Defines graphics for wooden WEAPON item defined by WEAPON_GRAPHICS not being worn by creatures; follows WEAPON_GRAPHICS.
WEAPON_GRAPHICS_WEAPON_TRAP	Tile page ID x index y index	Defines graphics for WEAPON item defined by WEAPON_GRAPHICS as it appears installed in a weapon trap; follows WEAPON_GRAPHICS.
TOOL_GRAPHICS	Tile page ID x index y index Item ID	Defines default graphics for TOOL items; also begins defining variant graphics when followed by the tool graphics material tokens below.
ADD_TOOL_GRAPHICS	Item ID	Alternate method to using TOOL_GRAPHICS; does not set a default graphic, uses the tool graphics material tokens below to define graphics for each material. Player-added tools that use the built-in reactions (ie. included as a TOOL in the entity definition) can use this method to define the graphics for HARD_MAT tools.
TOOL_GRAPHICS_WOOD	Variant number[Verify] Tile page ID x index y index	Defines additonal variant graphics for wooden TOOL items defined by TOOL_GRAPHICS; follows TOOL_GRAPHICS or ADD_TOOL_GRAPHICS. Can accept up to seven variants; the resulting tool graphic is selected randomly from these.
TOOL_GRAPHICS_STONE	Variant number[Verify] Tile page ID x index y index	Defines additonal variant graphics for stone TOOL items defined by TOOL_GRAPHICS; follows TOOL_GRAPHICS or ADD_TOOL_GRAPHICS. Can accept up to seven variants; the resulting tool graphic is selected randomly from these.
TOOL_GRAPHICS_METAL	Variant number[Verify] Tile page ID x index y index	Defines additonal variant graphics for metal TOOL items defined by TOOL_GRAPHICS; follows TOOL_GRAPHICS or ADD_TOOL_GRAPHICS. Can accept up to seven variants; the resulting tool graphic is selected randomly from these.
TOOL_GRAPHICS_GLASS	Variant number[Verify] Tile page ID x index y index	Defines additonal variant graphics for glass TOOL items defined by TOOL_GRAPHICS; follows TOOL_GRAPHICS or ADD_TOOL_GRAPHICS. Can accept up to seven variants; the resulting tool graphic is selected randomly from these.
TOOL_GRAPHICS_HIVE_BLD	Tile page ID x index y index	Defines the built item graphics for HIVE items.
TOOL_GRAPHICS_HIVE_BLD_IN_USE	Tile page ID x index y index	Defines the built item graphics for HIVE items that have hives installed.
TOOL_GRAPHICS_HIVE_PRODUCTS	Tile page ID x index y index	Defines the built item graphics for HIVE items that are ready to be harvested.
TOOL_GRAPHICS_SHAPE	Shape ID Tile page ID x index y index	Defines graphics for shaped items; currently used for dice.
TOOL_GRAPHICS_CONTAINER_WOOD_LIQUID	Tile page ID x index y index	Defines graphics for wooden liquid-containing containers (empty); follows ADD_TOOL_GRAPHICS definition for container.
TOOL_GRAPHICS_CONTAINER_STONE_LIQUID	Tile page ID x index y index	Defines graphics for stone liquid-containing containers (empty); follows ADD_TOOL_GRAPHICS definition for container.
TOOL_GRAPHICS_CONTAINER_METAL_LIQUID	Tile page ID x index y index	Defines graphics for metal (and glass?) liquid-containing containers (empty); follows ADD_TOOL_GRAPHICS definition for container.
TOOL_GRAPHICS_CONTAINER_LIQUID	Tile page ID x index y index	Defines graphics for the liquid filling a liquid-containing container; follows TOOL_GRAPHICS_CONTAINER_*_LIQUID.
TOOL_GRAPHICS_CONTAINER_WOOD_ITEM	Tile page ID x index y index	Defines graphics for wooden containers holding items; follows ADD_TOOL_GRAPHICS definition for container.
TOOL_GRAPHICS_CONTAINER_STONE_ITEM	Tile page ID x index y index	Defines graphics for stone containers holding items; follows ADD_TOOL_GRAPHICS definition for container.
TOOL_GRAPHICS_CONTAINER_METAL_ITEM	Tile page ID x index y index	Defines graphics for metal (and glass?) containers holding items; follows ADD_TOOL_GRAPHICS definition for container.

World Map Graphics

World map graphics are defined in Dwarf Fortress\data\vanilla\vanilla_world_map\graphics\graphics_world_map.txt Tokens that accept variants have 5 of them:

   [TILE_GRAPHICS:<tile page identifier>:<x position>:<y position>:<TOKEN>:1]
   [TILE_GRAPHICS:<tile page identifier>:<x position>:<y position>:<TOKEN>:2]
   [TILE_GRAPHICS:<tile page identifier>:<x position>:<y position>:<TOKEN>:3]
   [TILE_GRAPHICS:<tile page identifier>:<x position>:<y position>:<TOKEN>:4]
   [TILE_GRAPHICS:<tile page identifier>:<x position>:<y position>:<TOKEN>:5]

Otherwise:

  [TILE_GRAPHICS:<tile page identifier>:<x position>:<y position>:<TOKEN>]

See Also

• Creature token
• Syndrome
• Creature examples