v50 Steam/Premium information for editors
  • v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
  • Use this page to report any issues related to the migration.
This notice may be cached—the current version can be found here.

Difference between revisions of "Quickstart guide"

From Dwarf Fortress Wiki
Jump to navigation Jump to search
Line 495: Line 495:
 
# Place the furniture in it with {{Menu icon|b|f|r|sep=-}} (chair) and {{Menu icon|b|f|t|sep=-}} (table).  
 
# Place the furniture in it with {{Menu icon|b|f|r|sep=-}} (chair) and {{Menu icon|b|f|t|sep=-}} (table).  
 
# Wait for the dwarves to install the furniture
 
# Wait for the dwarves to install the furniture
# Using the {{Menu icon|z|sep=-}}ones menu, mark the room as an office, and then assign the office to your expedition leader (who should be both your bookkeeper and manager).  
+
# Using the {{Menu icon|z|sep=-}} (zones) menu, mark the room as an office, and then assign the office to your expedition leader (who should be both your bookkeeper and manager).  
 
# Hit {{K|n}} to verify that these positions now have the office they need (if so, the icon next to the position should no longer be red).
 
# Hit {{K|n}} to verify that these positions now have the office they need (if so, the icon next to the position should no longer be red).
  

Revision as of 17:20, 1 February 2023

This article is about the current version of DF.
Note that some content may still need to be updated.

For installation instructions, see Installation.
This is a quickstart guide for dwarf fortress mode for those who have never played before and quickly want to jump in head-first. If you are looking to learn adventure mode instead, see the Adventure mode quick start guide.
Also see Tutorials for more detailed tutorials that people have submitted.
Before you get started...

Always remember that losing is fun! Be prepared to lose a few fortresses before you get all the way through this guide – it can be easy to accidentally kill the entire fortress while learning. But remember: losing means that next time, you'll remember how you lost. In a big way, Dwarf Fortress uses the principle of learning from one's mistakes.


So, you want to play Dwarf Fortress, but you have no idea what to do. That's understandable; in Dwarf Fortress you can really do anything you like. It is a huge, complex, and totally open-ended game. But in order to do anything, first you need a sustainable fortress. It turns out that this is not as hard as you might think.

From Caravan to Happy Dwarves - This is a flowchart showing approximately what sequence of actions players usually take when starting up a new fort. Feel free to ignore it if you want. It's not necessary to refer to this to understand the rest of the guide, but by the time you finish the guide it will probably all make sense.

Common UI Concepts


Keeping Up

While the guide contains many links, you may still need to look something up. Refer to the Fortress Mode Reference Guide or use the wiki search function. Also, don't hesitate to ask for help if you can't find answers on the wiki.


This is just the Quickstart Guide, so we skip lots of details on the UI. If you're looking for more UI help as you get deeper into your first fortress, you may also want to read this section in the Fortress Mode Guide.

About key symbols

This wiki uses symbols that look like t or Ui t.pngt to indicate what keys or interface buttons are used for an operation. Note that keys are case sensitive and to save space, Shift+t is shown as T. So t means "press the 't' key without the shift key" and T means "hold down shift and press the 't' key". Lowercase and uppercase keys will often perform different functions, so it is important to use the correct key. Sequences of keys will be in separate boxes, so abC means "press 'a', then press 'b', then hold shift and press 'c'"; while Ui b.pngbUi bT.pngT means "press 'b', then hold shift and press 'T'. A plus sign '+' between the boxes means to press them all together, so Shift+Enter means to hold shift and press 'Enter'. Other separators, such as ',' or '-', might be used but mean the same as no separator: to press the keys in sequence.

Keybindings can be seen and changed on the Keybindings tab in the Settings menu.

Menu navigation and selection

Esc or right mouse Go back to the previous screen/menu
Mouse wheel Scroll menu one line
Shift+mouse wheel Scroll menu one page
Left mouse Select menu option

Esc or right mouse will almost always return to the previous screen until you get to the top level of the UI, at which point Esc will display the options menu.

Options menu

Main article: Options screen

Most basic game-related tasks (saving, keybindings, sound, etc.) are performed through the options menu, which can be reached with Esc from the main screen.

To save and quit back to the main menu, select Save and return to title menu. Unless you know what you are doing, do not select either Retire the Fortress (for the time being) or Abandon the Fortress to Ruin! These will essentially cause you to lose your save.

World Generation

First, generate a new world. Dwarf Fortress worlds are always procedurally randomly generated - there is no "default" or "standard" world. Luckily, the basic version of this process is simple, and with these suggested settings won't take too long. Wait until the game shows that the world has been generated, since stopping history too soon can limit material availability for embark and trade.


Starting World

For your first game, generate a new world using the Create new world option in the main menu with the following options:

  • World map size is Medium
  • History length is 100 years
  • Number of Civilizations is Medium
  • Number of Sites is Medium
  • Number of Beasts is Low
  • Natural Savagery is Very Low
  • Mineral Occurrence is Everywhere


Embark

Main article: Embark

Embarking is the process of choosing a site, outfitting your initial dwarves, and sending them on their way.

After generating a world, select Play now then choose fortress mode. The game will load and update the world, then show the world map.

Mouse over the map to inspect it. Left-click to zoom in, where you can then click the Embark button in the bottom right corner to choose an embark site.

Choosing a Good Site

Choosing a good embark site is crucial for beginners. Highly skilled players can run a fortress on an evil glacier, but for now, stick to friendly environments. Look for features in an embark site that will make your first fort easier to manage.


Starting Site
An example of a good starting location, note details in the top-right corner

For your first game, find a site with the following properties:

  • NO Aquifer (or at least no heavy or varied aquifers. Light is interesting on later embarks, but heavy guarantees Fun!)
  • Trees: Woodland or Heavily Forested (or, at the very least, sparsely forested)
  • Surroundings: Serene, calm, or at least not any evil or savage biome.
  • A River

The following are also good to have, but focus on getting a decent site, not a perfect one.

  • Temperature: Warm or Temperate
  • Clay or Soil makes farming easier when starting out
  • Flux stone layer For your steel industry
  • Also avoid sites containing towers, goblins, or other groups at war with you.

See Starting site for more info on why these characteristics are important.


Initial finder criteria

While finding a site is not as simple as world generation, the Find embark location button at the bottom of the screen can help.

Finder partial match missing Good surroundings

Once the find tool has finished searching with matches found, press Esc to look at the results. Any region in which it found a match will be indicated by a green X on the map. Any embark sites matching the criteria will be shown by a rectangle of yellow Xs on the zoomed-in map.

Additionally, when placing the embark area you can resize it using the buttons on-screen. A 4x4 embark (the default) is usually reasonable, but you may want to change the size to avoid an undesirable biome or match your finder criteria.

If you are unable to find a site that you are willing to embark on, you could always create a new world. Otherwise, move on to the next step.

Skills and Equipment

Optional: Preparing Carefully

If, at this point, you'd like to get into all of the details of picking individual skills and equipment for your expedition, select Prepare for the journey carefully and see Preparing carefully for instructions. This is completely optional. And preparing carefully makes little difference in the long run, especially without experience as to what to change.

Now the Prepare for the Journey screen should appear. You will be given the choice to either:

  • Play Now!
  • Prepare for the journey carefully.

In addition, settings are also displayed on the right-hand side. Turn enemies to Off. Selecting Play Now! will start you out with a default set of equipment that is reasonably safe, allowing you to skip having to set up your skills and equipment. If you'd like to get going now, just select that option.

A Minimal Fortress

Starting out. In this example, the dwarves will be digging out an entrance tunnel in the cliff on the right.

At this point, you have embarked, and your dwarves have arrived at their destination. You will see your dwarves clustered around their wagonful of supplies, somewhere near the center of your map. Immediately hit Space to pause the game unless it is already paused.

Getting your bearings

Do not unpause the game just yet. Take a look around with wasd. Look up and down a few z-levels with the scroll wheel. You can zoom in and out with Ctrl-scroll wheel. Place the cursor on various tiles to familiarize yourself with what the symbols mean. If you get lost, you can press F1 (or Fn-F1 on some systems) to return to the wagon. (You can define more hotkeys later, to jump quickly to other sites of interest.) Notice the terrain features, the vegetation, and any minerals visible. If you chose a site with flowing water, where is it? What about pools of water? The more carefully you examine your site before breaking ground, the better off you will be.

In the bottom left, click the citizens information button to see a list of your dwarves. In the Others tab, you can see any wild animals that may be nearby.

The Stocks button at the top of the screen will show the items owned by your fortress.

On the left, there are buttons for various message logs.

Your wagon serves as the initial meeting area for your dwarves. Since you should have started in a non-freezing, calm (low savagery), non-evil biome, you shouldn't face any immediate danger, but if for some reason the area around your wagon proves to be unsafe, immediately designate another meeting zone (see Temporary Meeting Area below).

Controlling Your Dwarves

The first thing to keep in mind is that, for the most part, you can't directly control your dwarves the way you control characters in a typical fantasy RPG. Instead, you designate things that need to be done and then dwarves with the appropriate labor assignments will decide what to do.

Some tasks receive a higher priority. For example, if a dwarf needs to eat, then he will go eat, and only get around to digging a tunnel once he is done eating. It is also possible to designate things that no dwarf is able to do. For example, if you designate an area to mine, but no dwarf has mining as one of his allowed labors, or no dwarf has a pick, then the mining will never get done, and the game will not always advise you of why.

So, what you are doing throughout the game is essentially giving your dwarves a detailed group-wide to-do list, but it's up to them to figure out which one of them will execute any given task if the task is even possible. Often many of the details of how a task is performed (such as exactly which rock will be used to make crafts) are left up to them.

Labor and work details

Utilities

You may have noticed that the UI for managing dwarves is a bit difficult to use. There are a few utilities available for this purpose (for Windows, Mac OS X, and most Linux systems):

  • Dwarf Therapist (not yet supported for v50) can make labor management considerably easier, especially when you're dealing with twenty times the number of dwarves you have now. It can group and sort dwarves by multiple attributes and display their preferences, mood, and more.
  • DFHack (not yet supported for v50) includes "Dwarf Manipulator", a UI for managing labors. It has fewer features than Dwarf Therapist, but displays much of the same information and is adequate for normal use. In addition, it is accessible from within DF via u-l, eliminating the need to constantly switch between applications.
Main article: Labor

Labors are how you control what types of tasks a dwarf is allowed do. When dwarves are idle, it could be because you haven't given them anything to do, or it could be because none of the idle dwarves have been told that they're allowed to do the types of tasks you've designated. For example, if you designate an area to mine, but none of the dwarves have the mining labor enabled, they will all just sit around ignoring your mining designation, thinking that it isn't their job.

Labors are assigned to dwarves in groups called work details. Open the labor menu from the bottom left to see all the default work details and their assignments.

Fortunately, you don't need to assign a dwarf for every single labor in the game; work details can be set to "everybody does this" to allow any idle dwarf to pick up the job.

While you're here, set the Hunters and Fisherdwarves work details to "nobody does this." Dwarves with these details enabled will constantly be outside attempting to perform them, and for now you don't want dwarves wandering around alone where they can get killed (in addition, they won't be doing anything useful, like hauling).

Also, the default embark comes with three pickaxes: so for efficiency, make sure two dwarves have the Miners detail enabled.

As dwarves perform jobs, they gain skill in those areas which leads to them working faster or producing higher-quality things. Note that any unskilled dwarf can perform any labor given the necessary equipment and materials; they'll just be worse at it.

The default work details contain all the essential labors for the very start of your fortress, but this guide will involve other labors. Keep in mind that at some point you'll have to assign the following labors by creating custom work details:

Category Labor
Farming/Related Wood Burning
Metalsmithing Furnace Operating
Metalsmithing Armoring
Metalsmithing Weaponsmithing
Metalsmithing Blacksmithing
Metalsmithing Metalcrafting
Jewelry Gem Cutting

Strike The Earth!

Getting your dwarves to safety

As you now know, you can't control your dwarves directly. So how do you tell them to get inside your newly dug rooms?

  • Meeting Area You can designate a Meeting Area zone inside the new rooms. Press z and click "Meeting Area". Draw a rectangle to create a meeting area, then click "Accept". See also the zone page for more information.
  • Stockpiles (see below) Stockpiles tell your dwarves where to put things. Create a stockpile for everything, and dwarves will start to haul all your items there.

Decide where you will build your main entrance. Generally, you will want to get all your dwarves and supplies inside a protected area as quickly as possible. The best strategy is to put the entrance near your wagon to speed up the process of hauling all of your supplies inside.

The digging orders menu allows you to select areas to dig. Click the pick axe at the bottom or press m. There are multiple methods of digging:

  • Mining (m) removes solid, floor-to-ceiling terrain (natural 'walls') on the z-level selected, leaving behind a rock or soil surface (also referred to as a natural floor). This does not do anything in areas without natural walls (for example, the surface or previously-mined areas).
  • Channeling (m-u) removes natural (rock/soil) floors (either created naturally or by mining) and creates a ramp (▲) on the z-level below. Note that you will see a down arrow (▼) on the current z-level, indicating a ramp on the level below. (For best results, ensure that the area below is unrevealed, i.e. black).

To designate an area for digging:

  1. Hit m to bring up the digging orders menu.
  2. Hit m to mine or u to channel (see above)
  3. Draw a rectangular are you want to dig out.
  4. A rectangle will be highlighted and a miner will start to dig out this area once you unpause the game with Space.
Demonstrating the difference between mining and channeling. Mining creates empty space on the same level where it is designated. Channeling creates empty space in the level below, clearing the floor. The levels are connected by up/down ramps.
Channeling

Note that channeling can be dangerous. Unless you know what you're doing, you should only ever make a pit one z-level deep. If you dig a pit multiple z-levels deep, only the lowest level will have an upward ramp, which is not enough for dwarves to leave the pit. (Dwarves can climb out in some circumstances, but this is unreliable.)

Pit depth: 1 z-level  2 z-levels  2 z-levels
Ground      ____       __ __       __ _  
                             
                             
                                  

This diagram shows the cross-section (side view) of 1x1 pits channeled 1 z-level deep, 2 z-levels deep and the correct way to do a 2 z-level deep ramp. The appearance of "downward ramps" can be confusing as there is no such thing - the down arrow indicates a ramp on the level below. Dwarves in the first pit can walk up the ramp to ground level and escape, while dwarves in the second pit cannot use the ramp at all. The third pit lets dwarves walk back to the surface again since the two ramps are offset to produce a continued slope. In short, channels (particularly channels multiple z-levels deep) can be dangerous. Digging an entryway from the surface level is one of the few times you'll ever need to channel.

Stairs can also be used for an entryway, but channels allow wagons entry to your fortress.

If your wagon is near a cliff or hill (generally speaking, any difference in levels, usually shown by the existence of natural ramps), you can just designate a tunnel to mine (m) into the cliff to create an entryway. If the wagon is surrounded by flat terrain, channel out a 3x3 rectangle on the surface with m-u to create a sort of pit with ramps on the edges, then go down one z-level with c (or use the mouse scroll wheel) and tunnel into one wall of the pit (with m) to create your entry.

Dig a hallway one tile wide and at least 10 long, ideally more like 20. This will be your entryway.

Your entryway defines the boundary between your safe and protected inner fort, and the big, bad, outside world. You want this to be your only entrance, so that you only have to worry about defending this one opening. A somewhat-outdated video guide to starting a fortress can be found here. (Note that this applies to v0.34.11, not v50.14, so some parts may be inaccurate in the current version.)

Additional miners

Mining will go faster if you have more than one dwarf doing it. By default, only one dwarf has the Mining labor enabled, but this can be changed fairly easily:

  • Press y to open the labor menu, and select "Miners" on the left side.
  • Choose a dwarf that isn't doing anything especially useful (the fish cleaner is a good choice for a beginning fortress, but you can always change your mind if you end up with a useless peasant later on)
  • Click the check box next to the dwarf to enable the mining labor.
  • Exit with Esc or right mouse.

The next time you designate an area for mining, both of your miners should start working (assuming they're not busy doing something else).

Notes:

  • Each miner requires a pick. A standard embark comes with 3 picks. If you want more than three miners, you'll need to forge more picks (forging is covered later in this guide). Two miners should be adequate for most fortresses, but more miners can add reliability (for when a miner decides to sleep) and speed. For now, you'll almost never need more than two miners, but you'll want more once your fortress expands.
  • If you're digging a one-tile-wide hallway, only one miner can work from an end.
  • Mining, Wood Cutting, & Hunting labors are mutually exclusive - a dwarf can only have up to one of these professions active at a time. For this reason, it's not recommended to make your only woodcutter a miner, since they won't be able to cut wood anymore.

Delving Secure Lodgings

Near the middle of the entry tunnel, build a 5x5 room, and link it to the entrance tunnel with a 3-tile-wide passageway. Expand the main entry tunnel to three tiles wide from the entrance of the new room to the outside entry. At the end of the entry tunnel, dig a small room, which will later become your main stairwell. Two tiles past that, dig a larger room, which will later become your general stockpile, and connect it to the stairwell with a narrow passageway.

An example layout, as described in this section. Note the 3-tile wide passage - this allows merchants to access your depot, which will go in the 5x5 room. Note that the turn also needs to be 3 tiles wide; otherwise, wagons won't be able to access the room.


Room dimensions

Apart from wagon access (3 tiles wide), the trade depot (5x5), and other workshops (3x3), there are no fixed dimensions you need to worry about. The lower limiting factor is the traffic your tunnels receive (dwarves may have to start climbing over each other), and the space your rooms need (stockpiles, tables/chairs, livestock). The practical maximum size is limited by how long it takes your miners to dig the rooms out, especially if they're digging in stone instead of soil (digging through soil is much faster). Most sites have at least one level soil layer below ground level, which is where you're digging right now, but as you dig deeper you'll hit stone (if you haven't already), and digging will become slower. In most fortresses, even the main hallways never need to be wider than 3 tiles, and needing more than 3 tiles of stairs per floor is very rare. A 3x3 per floor staircase (9 stairs!) is absolute overkill for anything but 20-year-old 300-resident capitals. For most tunnels in your fortress, 2 tiles wide will be sufficient, and many will be fine at just 1 tile wide. 11x11 is a reasonable size for stockpile rooms. However, something smaller is perfectly fine for rarer stockpiles, offices, and small dining rooms. Commoners’ bedrooms need not be larger than the amount of furniture you want inside.

Mining safety

While mining, take care to avoid digging into water. Dwarves are usually poor swimmers, and are unlikely to escape from an underground flood. However, it is safe to mine next to underground water, as long as you leave at least one "wall" tile between them (see the picture to the right). You can also mine one z-level under a body of water (for example, mining under a river), but you will have to designate each tile individually because DF automatically cancels digging of newly-revealed "damp" tiles (tiles are considered damp when they are adjacent to a water tile, regardless of whether the water tile is on the same z-level or not).

Also note that water can flow diagonally:

.   . 
.   .. 
            
ok     flood

Stockpiles

Keep corpses, refuse, stone and wood out of general use stockpiles. You can come back and change the settings on this stockpile by clicking on it to open the stockpile menu, and clicking "Custom". Try to remember to come back here to disable/forbid types of things as you create more specific stockpiles for them.

Stockpiles are very important. These areas are where your dwarves will drop things for storage when they aren't needed elsewhere. To create a general purpose stockpile for your first storage area:

  1. Hit p to open the Stockpiles menu.
  2. Click the plus sign at the bottom to add a new stockpile.
  3. Draw a rectangle and click "Accept".
  4. Click "Custom" to change the goods that the stockpile accepts. Enable everything but Corpses, Refuse, Stone, Gems, and Wood. To do this, first click "All" in the top left to enable everything, then go through each type you want to exclude, and click "None" in the top-center of the screen. This will reject all goods of that type.
  5. Esc or right mouse twice to exit the stockpiles menu.

Once you exit the stockpiles menu and unpause, you should see dwarves running off to haul everything from your wagon into the new stockpile area. Later, if you like, you can change what sort of things the stockpile accepts by hitting p, clicking on the stockpile, then changing the stockpile settings as above.

It is particularly important to keep wood, stone, refuse, and corpses out of your general purpose stockpile, so you may want to double check to make sure all of these things are disabled in the stockpile settings. Failure to keep these things out of this stockpile will rapidly fill it up, causing workshops to become cluttered when dwarves can't store things in the stockpile. Note: When assigning stockpiles, you should make sure they're in a vacant area (i.e. the tiles should not have any items already stored on them). Dwarves will not haul items to occupied tiles, so make sure the area is vacant (and already mined out) before assigning a stockpile.

Stairways

Up, Down, Up/Down: Types of Stairs

In Dwarf Fortress, every z-level is composed of a floor and a wall (or "space between floors"). The confusingly named "down" and "up" stairs have nothing to do with the direction creatures can move to; instead, down stairs penetrate floors, while up stairs penetrate walls. Up/down stairs penetrate the wall and the floor below. (note the picture to the left)

When you designate a staircase to be dug out, the top level will be down-stairs, any inner levels will be up/down stairs, and the bottom level will be up-stairs.


Dig a stairway in the room you dug out for the stairwell (not the 5x5 room that you dug out earlier): press m-t, click on the floor of the room to start the staircase, scroll down one level, and click again to finish designating the staircase. This will create down-stairs on the top level, and up-stairs on the level below. To continue digging downwards later, you can designate another staircase (m-t) starting on the lowest exposed level and continuing downwards. For now just dig down one level.

This is how the different stairs would look like from the side.

Temporary Meeting Area

An example meeting area. Note that this layer has a different type of soil than the layer above - this can happen often. Also note that the "north" side of this room is directly below the lake in the level above, but no water is present.

On the second z-level below ground (the one below the stockpile level, which you just reached with the staircase), dig a short, 3-tile wide passageway (this only needs to be 1-2 tiles long). Past that, dig out a room between 5x5 and 7x7, leaving room to enlarge it in at least one direction in the future. Using the z key, create a meeting area in the room you just created, filling the entire room (be careful not to make this too small lest your overcrowded animals start fighting). This works much like creating a stockpile except that you define what the area is for before you draw the rectangle. Select "Meeting area", draw the rectangle, filling the entire room, and click "Accept". Your idle dwarves will hang around in this area, hopefully keeping them inside the fort and out of trouble.

NOTE: Again, make sure your activity zone is already mined out before attempting to designate the meeting area.

Refuse

Avoiding Miasma

Outside your fort entrance, use p and click the "plus stockpile" icon to create a stockpile for refuse (trash can icon) at least 5x5 in size. This should be outside in the open or you will have problems with Miasma. If you do not disable vermin (Item Types -> remains), you will probably have to expand it later as it will fill up with vermin remains rather quickly. If you are seeing refuse appear in your general-purpose stockpile instead of the refuse pile, click on the general stockpile and check its custom settings to make sure refuse has been disabled.

Food

Food is necessary for your dwarves' survival - to keep functioning, they require constant supplies of food and drink - the amount of food and drink currently available is displayed in the status bar at the top of the screen. Luckily, your dwarves will eat almost everything raw, including plants.

Farming

For a reliable, long-term food and alcohol supply, you'll need to set up a farm. Dig out a medium-sized room in a soil layer (including sand, clay, loam, silt, peat, and ooze) accessible from inside your existing fortress. 5x5 is a good size to start with, but you'll want to leave room to expand in at least one direction. You must pick an underground area with mud or soil*. Placing this near the stockpiles is more efficient, since farmers won't need to travel as far.

DFwiki5by53by3farm.png
Quickstart layout 3.png
ToggleA 5x5 room with a 3x3 farm plot

* Hopefully you have chosen a site with a soil layer, which will make farming much easier, but if not you will need to irrigate to create the required mud on stone floors.

Use Ui b.pngb-Ui bo.pngo-Ui bof.pngf-Ui bofp.pngp to build a 3x3 farm plot in the room you just created. Position the farm plot ideally near the wall to leave space for more plots later on.

The Planters work detail must be enabled for at least one dwarf, or the farm plot won't get built and farming will not take place. By default, Planters is set to "Everybody does this", so there's no need to change this now.

Esc out of the build menu and wait for the farmer dwarf to create the plot. Once the plot is built, click on it, and set the plot to grow plump helmets during all seasons. You need to go through each season tab to enable plump helmets in all seasons — otherwise you'll end up with an idle field for 3/4ths of the year.

Later, if you are curious what is planted in each plot this season and how much, click on the plot and it will show the list of seeds currently planted. There is no icon for a partially grown plant, so an empty field will look identical to a fully planted field until your crops are ready for harvest.

Note that a default embark starts with five plump helmet seeds — for now, only half of your field will end up being planted. Eventually, as your dwarves consume plump helmets, more seeds will become available and will be automatically planted by an unoccupied farmer.

For more troubleshooting tips, see How do I build a farm

Emergency food sources

Occasionally, even with a working plump helmet farm, you may experience food shortages. For now, you should have plenty of food on hand left over from embarking. However, if you ever run low on food, there are a few ways to obtain more:

Plant gathering

If you have shrubs (") growing above ground, you can harvest plants from them. Note that this requires a dwarf with the Plant gatherers work detail, and time (this can take a while for an inexperienced dwarf, and it doesn't always yield edible plants). To start, gather plants on the surface (similar to selecting an area for mining, except it only selects plants in the given rectangle). Once processed, some will leave behind harvested plants (often edible berries).

Butchering

If you suddenly run low on food, butchering an animal is another option. Build a butcher shop Ui b.pngb-Ui bo.pngo-Ui bof.pngf-Ui bofb.pngb and mark one of your animals for slaughtering (press u, click on "Pets/Livestock", and click the meat cleaver next to the animal you want to slaughter). A dwarf with the butchering labor enabled will haul the animal off to the butcher's shop, work for a while, and produce neat stacks of meat products.

Building material

Initially, wood is probably a good choice for building material, as it's lightweight and can be easily obtained. You will need plenty of building materials as your fortress grows, but wood will suffice for now. If you are unable to locate enough wood (or if you run out of trees, which is unlikely at this point), extend your staircase down to a stone level (m-t) and mine out a small area (at least 5x5) to obtain stone.

Even if you don't have trees, you can obtain 3 logs from your embark wagon. Click on your wagon, and click the button in the top right to deconstruct it. This will flag the wagon for disassembly. Eventually a carpenter will come along and turn the useless wagon into 3 units of wood. (Removing other buildings is done the same way.)

Woodcutting

Assuming your site has trees above ground, now is a good time to start obtaining wood. Create a stockpile for wood outside your entrance (preferably near to it). As it will only be temporary, don't make it too big (maybe 5x3, or 15 tiles total). Later, you will move this closer to your carpenter's workshop (once you build one with Ui b.pngb-Ui bo.pngo-Ui bop.pngp), so don't worry about placement too much. Also near the entry, designate a couple of trees to be chopped down with l. One tree will produce many logs, so only designate three to five at this point. If you designate too many trees, your woodcutters will spend all of their time chopping them down and hauling the resulting logs, instead of doing other work. As soon as one tree is cut down and its wood stored in a stockpile, you can proceed to the next step (your woodcutter will continue cutting down any remaining designated trees).

Drinks

Drinks can be more problematic than food, since they require more preparation (except for water, that is). In warmer weather, you can specify a "water source" activity zone around a lake or river on the surface to keep your dwarves from dying of thirst, but dwarves deprived of alcohol slow down and become unhappy. In addition, drinking outside can be dangerous — dwarves running outside constantly risk running into wild animals, or worse. Creating a still to brew alcohol is the simplest solution to these problems.

You need a brewer to brew drinks. Fortunately, the brewing labor is enabled on all dwarves by default. If you want to change this later, use the labor menu (y).

A completed still

Assuming you have building materials available (which you will if your woodcutter has been doing their job), you can now create a still:

  1. Dig out a 3x3 area connected to the farm plot.
  2. Use Ui b.pngb-Ui bo.pngo-Ui bof.pngf-Ui bofl.pngl to build a still. Position it in the 3x3 area you just created.
  3. Click on a building material for the still (this is probably one of the logs you just cut down by default).

After a short delay, one of your dwarves should run off, drag a log over to the workshop site, and build the workshop. (This is also how building other workshops works, but you won't need to do that yet).

To brew drinks, click on the still, click "Add new task", and "Brew drink from plant". This will not work yet, since you don't have any empty barrels or rock pots, but you should start brewing in the first six months (see Calendar and Status).

Pasture

Grazers

If you aren't sure whether or not an animal is a grazer, you can check this category. (You can also search for the animal on this wiki.)

If you have any grazing animals with you, such as the draft animals used to pull your wagon, they will die if they are kept away from grass for too long. Use z to create a Pen/Pasture zone over a grassy area outside and assign your grazing animals to it with the "plus bunny" icon in the top right of the zone menu. This area needs to be about 10x10 or so to ensure they have enough grass and don't trample it all. The amount of grass required varies greatly, depending on the type(s) of animals being pastured. If you intend to keep grazing animals permanently, you may need vastly larger pastures later. As an alternative, you might wish to slaughter your largest animals for food and materials.

Designing your first fortress

While this guide recommends a vertical fortress design around a central stairwell, with each z-level being used for a particular purpose, it is not really that important to use this design for your first fortress. Therefore, feel free to put any of the areas described in the rest of this guide on your main level or wherever you want as long as dwarves can get to them without going outside the fort. In other words, you can think of the "levels" described in the guide more as areas that can really all be on the same level if you have space. Later you can ponder over what makes things most efficient, but for now just do whatever you find easiest. Note that you may need to dig down a bit to get to stone if you have more than one z-level of sand/clay/soil below the surface.

Workshops

An example workshop layout. The gem stockpile (empty) is north of the Jeweler's workshop (southwest corner), the wood stockpile is west of the Carpenter's workshop (northeast corner), and the stone stockpile occupies the rest of the space. Note the wheelbarrow in the stone stockpile.

Most labors of your dwarves need a place where they can process raw materials — workshops. Almost all of them occupy a 3x3 square, and most of them require just 1 unit of any building material (wood, stone, metal). Dig your stairwell down one level (with m-t), if you haven't already. It's fine if this layer is soil — in fact, soil is better, since it's easier to dig through (if you only have one soil layer, you can put these workshops somewhere on your first level). Dig space for your workshops off of the stairwell. It will hold your mechanic's, stoneworker's, carpenter's, and jeweler's workshops. Something to consider is stockpile proximity: the farther away the material is the dwarves use, the more time they waste with walking. So for now, dig out some more space for stockpiles close to where your new workshops will be (wood for your carpenter, stone for your stoneworker and mechanic, and gems for your jeweler). It doesn't matter if you put everything in one large room or dig out small rooms for each workshop and stockpile. Once you've dug out your rooms, set your miners to work by adding a z-level or two to the staircase. Hopefully you'll obtain some stone by doing this, which will be useful eventually. While your miners are busy, use Ui b.pngb-Ui bo.pngo to build the workshops, using whatever building material you have. If you are still digging in soil and don't have stone yet, just use wood; the material really doesn't matter in this case. Be sure that your craftsdwarves still have labors corresponding to each workshop enabled (see Labor and work details above) so they will begin construction. (Dwarves already busy mining or hauling may not immediately stop to construct workshops; if you like, you may temporarily disable other labors in order to jumpstart workshop construction.) If the construction of any building gets "suspended" click on the workshop and click "Resume construction" to unsuspend it. (This can happen if another dwarf or object is blocking the way. See Garbage Dumping below if you find you need to remove an object.)

Too Good for Menial Peon Work

Certain labors are crucial in setting up a fort. At some point you may want to disable less important labors such as hauling for dwarves with the crucial skills of mining, masonry, architecture, carpentry, mechanics, and maybe others. You want these dwarves working on creating beds, doors, and trap components before hauling stone and cleaning.


Click on your stoneworker's shop and queue up one table and one throne/chair. You will find out why you need these in a second, but now is a good time to start building them. If you still don't have any stone at this point just use wood at the carpenter's workshop.

At this point, it is a good idea to build a few wheelbarrows to make hauling large objects (particularly stone) more efficient. Queue up 2 or 3 at the carpenter's workshop. (Wheelbarrows are located near the bottom of the list, you will need to scroll all the way down.) While the wheelbarrows are being built, click on your stone stockpile and click the barrel icon, and increase "Max wheelbarrows" to 3. Your dwarves will automatically move wheelbarrows to the stockpile once they are built.

"Where did I build that ____?"

As you build workshops, furnaces, Trade Depot, other buildings, rooms and even zones, you may start to lose track of where they all are -- or where they're supposed to be built, but some dwarf is too busy eating/drinking/hauling. There are a couple of commands available from the main UI that will help you locate what you built.

  • You can View Places and click the "Workshops" tab to see a Building List, and also Zoom to the building/item, or view the building's tasks.
  • For incomplete buildings/constructions, you can also open the task list and then recenter on the partially constructed building to find the intended location.

Brewing

You'll need barrels to store drinks for your dwarves. Queue up two or three barrels in your carpenter's workshop. (If you run out of wood at any point, cut down another tree or two outside). If a lack of wood cancelled a job, you will need to queue the job again. Go back to your still and order some drinks to be brewed. Each drink requires one barrel and one edible plant, such as a plump helmet. Even if none of yours have been harvested yet, you should have some left over from embark. Also, brewing plump helmets creates two seeds from one plant, which makes plump helmets an excellent choice for a beginning fortress. Five barrels should be plenty for now (each plant makes 5 "units", or servings, of booze, and dwarves don't need to drink too often, so 30 units should last you a whole year. When the stocks get low, you'll probably want to start queueing up more drinks to be made (you should have more empty barrels by then)).

"Garbage" Dumping

Main article: Garbage dump

Note that garbage is not the same thing as refuse. Refuse is rotting stuff. Garbage is anything you designate to be hauled to a garbage dump, even important things that aren't really garbage. Think of your garbage dump zone as a way to specify that objects you select will be brought to a specific area.

The garbage dump icon in-game.

Press